From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Cc: devicetree-discuss@ozlabs.org
Subject: [PATCH 2/2] powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systems
Date: Mon, 27 Apr 2009 12:59:48 -0500 [thread overview]
Message-ID: <1240855188-24879-2-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1240855188-24879-1-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/gef_ppc9a.dts | 13 +++++++++++++
arch/powerpc/boot/dts/gef_sbc310.dts | 13 +++++++++++++
arch/powerpc/boot/dts/gef_sbc610.dts | 13 +++++++++++++
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 13 +++++++++++++
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 13 +++++++++++++
arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts | 13 +++++++++++++
arch/powerpc/boot/dts/sbc8641d.dts | 13 +++++++++++++
7 files changed, 91 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index d47ad07..cbf135c 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -166,6 +166,19 @@
reg = <0xfef00000 0x100000>; // CCSRBAR 1M
bus-frequency = <33333333>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c1: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 1569117..155776c 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -166,6 +166,19 @@
reg = <0xfef00000 0x100000>; // CCSRBAR 1M
bus-frequency = <33333333>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c1: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 6582dbd..6898d7e 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -131,6 +131,19 @@
reg = <0xfef00000 0x100000>; // CCSRBAR 1M
bus-frequency = <33333333>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c1: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 4f081bb..252db6e 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -115,6 +115,19 @@
reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8610-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 51852e6..8bcccd7 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -117,6 +117,19 @@
reg = <0xffe00000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
index b5dc942..d4c909d 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -110,6 +110,19 @@
reg = <0x0f 0xffe00000 0x0 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index cfd5782..aa8f931 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -129,6 +129,19 @@
reg = <0xf8000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
--
1.6.0.6
next prev parent reply other threads:[~2009-04-27 17:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-27 17:59 [PATCH 1/2] powerpc/86xx: Add binding for LAWs and MCM Kumar Gala
2009-04-27 17:59 ` Kumar Gala
2009-04-27 17:59 ` Kumar Gala [this message]
2009-04-28 9:19 ` [PATCH 2/2] powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systems Martyn Welch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1240855188-24879-2-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=devicetree-discuss@ozlabs.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.