From: Ben Hutchings <bhutchings@solarflare.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev <netdev@vger.kernel.org>
Subject: [PATCH 1/5] ethtool: Update ethtool-copy.h
Date: Thu, 30 Apr 2009 13:33:16 +0100 [thread overview]
Message-ID: <1241094796.3185.2.camel@achroite> (raw)
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
This comes from net-next-2.6 as of today.
Ben.
ethtool-copy.h | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 100 insertions(+), 7 deletions(-)
diff --git a/ethtool-copy.h b/ethtool-copy.h
index 3ca4e2c..d9bb957 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -7,11 +7,14 @@
* Portions Copyright 2002 Intel (eli.kupermann@intel.com,
* christopher.leech@intel.com,
* scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
*/
#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H
+#include <linux/types.h>
+
/* This should work for both 32 and 64 bit userland. */
struct ethtool_cmd {
__u32 cmd;
@@ -23,14 +26,16 @@ struct ethtool_cmd {
__u8 phy_address;
__u8 transceiver; /* Which transceiver to use */
__u8 autoneg; /* Enable or disable autonegotiation */
+ __u8 mdio_support;
__u32 maxtxpkt; /* Tx pkts before generating tx int */
__u32 maxrxpkt; /* Rx pkts before generating rx int */
__u16 speed_hi;
__u16 reserved2;
- __u32 reserved[3];
+ __u32 lp_advertising; /* Features the link partner advertises */
+ __u32 reserved[2];
};
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+static __inline__ void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
__u32 speed)
{
@@ -38,7 +43,7 @@ static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
ep->speed_hi = (__u16)(speed >> 16);
}
-static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+static __inline__ __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
{
return (ep->speed_hi << 16) | ep->speed;
}
@@ -285,12 +290,78 @@ enum ethtool_flags {
ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
};
-struct ethtool_rxnfc {
- __u32 cmd;
+/* The following structures are for supporting RX network flow
+ * classification configuration. Note, all multibyte fields, e.g.,
+ * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
+ * byte order.
+ */
+struct ethtool_tcpip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be16 psrc;
+ __be16 pdst;
+ __u8 tos;
+};
+
+struct ethtool_ah_espip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 spi;
+ __u8 tos;
+};
+
+struct ethtool_rawip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __u8 hdata[64];
+};
+
+struct ethtool_ether_spec {
+ __be16 ether_type;
+ __u8 frame_size;
+ __u8 eframe[16];
+};
+
+#define ETH_RX_NFC_IP4 1
+#define ETH_RX_NFC_IP6 2
+
+struct ethtool_usrip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 l4_4_bytes;
+ __u8 tos;
+ __u8 ip_ver;
+ __u8 proto;
+};
+
+struct ethtool_rx_flow_spec {
__u32 flow_type;
- __u64 data;
+ union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_rawip4_spec raw_ip4_spec;
+ struct ethtool_ether_spec ether_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ __u8 hdata[64];
+ } h_u, m_u; /* entry, mask */
+ __u64 ring_cookie;
+ __u32 location;
};
+struct ethtool_rxnfc {
+ __u32 cmd;
+ __u32 flow_type;
+ /* The rx flow hash value or the rule DB size */
+ __u64 data;
+ struct ethtool_rx_flow_spec fs;
+ __u32 rule_cnt;
+ __u32 rule_locs[0];
+};
+
+
/* CMDs currently supported */
#define ETHTOOL_GSET 0x00000001 /* Get settings. */
#define ETHTOOL_SSET 0x00000002 /* Set settings. */
@@ -338,6 +409,12 @@ struct ethtool_rxnfc {
#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
@@ -360,6 +437,11 @@ struct ethtool_rxnfc {
#define SUPPORTED_Pause (1 << 13)
#define SUPPORTED_Asym_Pause (1 << 14)
#define SUPPORTED_2500baseX_Full (1 << 15)
+#define SUPPORTED_Backplane (1 << 16)
+#define SUPPORTED_1000baseKX_Full (1 << 17)
+#define SUPPORTED_10000baseKX4_Full (1 << 18)
+#define SUPPORTED_10000baseKR_Full (1 << 19)
+#define SUPPORTED_10000baseR_FEC (1 << 20)
/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half (1 << 0)
@@ -378,6 +460,11 @@ struct ethtool_rxnfc {
#define ADVERTISED_Pause (1 << 13)
#define ADVERTISED_Asym_Pause (1 << 14)
#define ADVERTISED_2500baseX_Full (1 << 15)
+#define ADVERTISED_Backplane (1 << 16)
+#define ADVERTISED_1000baseKX_Full (1 << 17)
+#define ADVERTISED_10000baseKX4_Full (1 << 18)
+#define ADVERTISED_10000baseKR_Full (1 << 19)
+#define ADVERTISED_10000baseR_FEC (1 << 20)
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
@@ -402,6 +489,7 @@ struct ethtool_rxnfc {
#define PORT_MII 0x02
#define PORT_FIBRE 0x03
#define PORT_BNC 0x04
+#define PORT_OTHER 0xff
/* Which transceiver to use. */
#define XCVR_INTERNAL 0x00
@@ -434,9 +522,13 @@ struct ethtool_rxnfc {
#define UDP_V6_FLOW 0x06
#define SCTP_V6_FLOW 0x07
#define AH_ESP_V6_FLOW 0x08
+#define AH_V4_FLOW 0x09
+#define ESP_V4_FLOW 0x0a
+#define AH_V6_FLOW 0x0b
+#define ESP_V6_FLOW 0x0c
+#define IP_USER_FLOW 0x0d
/* L3-L4 network traffic flow hash options */
-#define RXH_DEV_PORT (1 << 0)
#define RXH_L2DA (1 << 1)
#define RXH_VLAN (1 << 2)
#define RXH_L3_PROTO (1 << 3)
@@ -446,5 +538,6 @@ struct ethtool_rxnfc {
#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
#define RXH_DISCARD (1 << 31)
+#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
#endif /* _LINUX_ETHTOOL_H */
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next reply other threads:[~2009-04-30 12:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-30 12:33 Ben Hutchings [this message]
2009-04-30 12:35 ` [PATCH 1/5] ethtool: Update ethtool-copy.h Ben Hutchings
2009-04-30 12:36 ` [PATCH 1/5] ethtool: Remove support for RX hashing by port Ben Hutchings
2009-04-30 12:37 ` [PATCH 3/5] ethtool: Decode PORT_OTHER Ben Hutchings
2009-04-30 12:37 ` [PATCH 4/5] ethtool: Report link partner advertising Ben Hutchings
2009-04-30 12:38 ` [PATCH 5/5] ethtool: Report pause auto-negotiation flags Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1241094796.3185.2.camel@achroite \
--to=bhutchings@solarflare.com \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.