From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 06/18] ASoC: Allow use of resource from the platform device for S3C IISv2
Date: Tue, 5 May 2009 11:02:19 +0100 [thread overview]
Message-ID: <1241517751-2634-6-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20090505100123.GB2050@rakim.wolfsonmicro.main>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/s3c24xx/s3c-i2s-v2.c | 18 ++++++++++++++++++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 34142c8..cb85498 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -580,6 +580,24 @@ int s3c_i2sv2_probe(struct platform_device *pdev,
/* record our i2s structure for later use in the callbacks */
dai->private_data = i2s;
+ if (!base) {
+ struct resource *res = platform_get_resource(pdev,
+ IORESOURCE_MEM,
+ 0);
+ if (!res) {
+ dev_err(dev, "Unable to get register resource\n");
+ return -ENXIO;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res),
+ "s3c64xx-i2s-v4")) {
+ dev_err(dev, "Unable to request register region\n");
+ return -EBUSY;
+ }
+
+ base = res->start;
+ }
+
i2s->regs = ioremap(base, 0x100);
if (i2s->regs == NULL) {
dev_err(dev, "cannot ioremap registers\n");
--
1.6.2.4
next prev parent reply other threads:[~2009-05-05 10:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-05 10:01 ASoC updates for 2.6.31 Mark Brown
2009-05-05 10:02 ` [PATCH 01/18] ASoC: Fix error message formatting in s3c64xx-i2s driver Mark Brown
2009-05-05 10:02 ` [PATCH 02/18] ASoC: Check for supported CPUs when building s3c-i2s-v2 Mark Brown
2009-05-05 10:02 ` [PATCH 03/18] ASoC: Make S3C64xx clock export function to return struct clk Mark Brown
2009-05-05 10:02 ` [PATCH 04/18] ASoC: Fix data format configuration for S3C64xx IISv2 and add 24 bit Mark Brown
2009-05-05 10:02 ` [PATCH 05/18] ASoC: Fix boot warnings from S3C IISv2 Mark Brown
2009-05-05 10:02 ` Mark Brown [this message]
2009-05-05 10:02 ` [PATCH 07/18] ASoC: Display the clock rate used as the basis for rate calculation Mark Brown
2009-05-05 10:02 ` [PATCH 08/18] ASoC: Display S3C IISv2 mode and MS errors by default Mark Brown
2009-05-05 10:02 ` [PATCH 09/18] ASoC: Staticise txctrl and rxctrl for S3C IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 10/18] ASoC: Use platform device resource for S3C64xx IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 11/18] ASoC: Use a shared define for AC97 CODEC data formats Mark Brown
2009-05-05 10:02 ` [PATCH 12/18] ASoC: Remove unused DAI format defines Mark Brown
2009-05-05 10:02 ` [PATCH 13/18] ASoC: Fix errors in WM8990 Mark Brown
2009-05-05 10:02 ` [PATCH 14/18] ASoC: TWL4030: Add VDL analog bypass Mark Brown
2009-05-05 10:02 ` [PATCH 15/18] ASoC: TWL4030: Add voice digital loopback: sidetone Mark Brown
2009-05-05 10:02 ` [PATCH 16/18] ASoC: IMote2 ASoC Support Mark Brown
2009-05-05 10:02 ` [PATCH 17/18] ASoC: TWL4030: Add VIBRA output Mark Brown
2009-05-05 10:02 ` [PATCH 18/18] ASoC: Remove redundant codec pointer from DAIs Mark Brown
2009-05-05 10:45 ` ASoC updates for 2.6.31 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1241517751-2634-6-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.