From: Beth Kon <eak@us.ibm.com>
To: avi@redhat.com
Cc: kvm@vger.kernel.org, Beth Kon <eak@us.ibm.com>
Subject: [PATCH 4/4] Userspace changes for KVM HPET (v3)
Date: Mon, 11 May 2009 13:29:46 -0400 [thread overview]
Message-ID: <1242062986-29383-4-git-send-email-eak@us.ibm.com> (raw)
In-Reply-To: <1242062986-29383-1-git-send-email-eak@us.ibm.com>
Signed-off-by: Beth Kon <eak@us.ibm.com>
diff --git a/hw/hpet.c b/hw/hpet.c
index c7945ec..100abf5 100644
--- a/hw/hpet.c
+++ b/hw/hpet.c
@@ -30,6 +30,7 @@
#include "console.h"
#include "qemu-timer.h"
#include "hpet_emul.h"
+#include "qemu-kvm.h"
//#define HPET_DEBUG
#ifdef HPET_DEBUG
@@ -48,6 +49,28 @@ uint32_t hpet_in_legacy_mode(void)
return 0;
}
+static void hpet_legacy_enable(void)
+{
+ if (qemu_kvm_pit_in_kernel()) {
+ kvm_kpit_disable();
+ dprintf("qemu: hpet disabled kernel pit\n");
+ } else {
+ hpet_pit_disable();
+ dprintf("qemu: hpet disabled userspace pit\n");
+ }
+}
+
+static void hpet_legacy_disable(void)
+{
+ if (qemu_kvm_pit_in_kernel()) {
+ kvm_kpit_enable();
+ dprintf("qemu: hpet enabled kernel pit\n");
+ } else {
+ hpet_pit_enable();
+ dprintf("qemu: hpet enabled userspace pit\n");
+ }
+}
+
static uint32_t timer_int_route(struct HPETTimer *timer)
{
uint32_t route;
@@ -475,9 +498,9 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
}
/* i8254 and RTC are disabled when HPET is in legacy mode */
if (activating_bit(old_val, new_val, HPET_CFG_LEGACY)) {
- hpet_pit_disable();
+ hpet_legacy_enable();
} else if (deactivating_bit(old_val, new_val, HPET_CFG_LEGACY)) {
- hpet_pit_enable();
+ hpet_legacy_disable();
}
break;
case HPET_CFG + 4:
@@ -560,7 +583,7 @@ static void hpet_reset(void *opaque) {
* hpet_reset is called due to system reset. At this point control must
* be returned to pit until SW reenables hpet.
*/
- hpet_pit_enable();
+ hpet_legacy_disable();
count = 1;
}
diff --git a/qemu-kvm.c b/qemu-kvm.c
index f55cee8..1bb853b 100644
--- a/qemu-kvm.c
+++ b/qemu-kvm.c
@@ -463,6 +463,25 @@ void kvm_init_vcpu(CPUState *env)
qemu_cond_wait(&qemu_vcpu_cond);
}
+void kvm_kpit_enable(void)
+{
+ struct kvm_pit_state ps;
+ if (qemu_kvm_pit_in_kernel()) {
+ kvm_get_pit(kvm_context, &ps);
+ kvm_set_pit(kvm_context, &ps);
+ }
+}
+
+void kvm_kpit_disable(void)
+{
+ struct kvm_pit_state ps;
+ if (qemu_kvm_pit_in_kernel()) {
+ kvm_get_pit(kvm_context, &ps);
+ ps.channels[0].mode = 0xff;
+ kvm_set_pit(kvm_context, &ps);
+ }
+}
+
int kvm_init_ap(void)
{
#ifdef TARGET_I386
diff --git a/qemu-kvm.h b/qemu-kvm.h
index 6a1968a..13353ec 100644
--- a/qemu-kvm.h
+++ b/qemu-kvm.h
@@ -31,6 +31,8 @@ int kvm_update_guest_debug(CPUState *env, unsigned long reinject_trap);
int kvm_qemu_init_env(CPUState *env);
int kvm_qemu_check_extension(int ext);
void kvm_apic_init(CPUState *env);
+void kvm_kpit_enable(void);
+void kvm_kpit_disable(void);
int kvm_set_irq(int irq, int level, int *status);
int kvm_physical_memory_set_dirty_tracking(int enable);
diff --git a/vl.c b/vl.c
index 0bffc82..8f120c5 100644
--- a/vl.c
+++ b/vl.c
@@ -6132,10 +6132,15 @@ int main(int argc, char **argv, char **envp)
}
if (kvm_enabled()) {
- kvm_init_ap();
+ kvm_init_ap();
#ifdef USE_KVM
if (kvm_irqchip && !qemu_kvm_has_gsi_routing()) {
irq0override = 0;
+ /* if kernel can't do irq routing, interrupt source
+ * override 0->2 can not be set up as required by hpet,
+ * so disable hpet.
+ */
+ no_hpet=1;
}
#endif
}
next prev parent reply other threads:[~2009-05-11 17:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-11 17:29 [PATCH 1/4] BIOS changes for configuring irq0->inti2 override (v3) Beth Kon
2009-05-11 17:29 ` [PATCH 2/4] Userspace " Beth Kon
2009-05-12 9:53 ` Gleb Natapov
2009-05-12 10:22 ` Avi Kivity
2009-05-12 10:52 ` Gleb Natapov
2009-05-12 13:20 ` [PATCH 2/4] Userspace changes for configuring irq0->inti2override (v3) Beth Kon
2009-05-12 13:37 ` Gleb Natapov
2009-05-12 13:29 ` Beth Kon
2009-05-11 17:29 ` [PATCH 3/4] BIOS changes for KVM HPET (v3) Beth Kon
2009-05-11 17:29 ` Beth Kon [this message]
2009-05-12 9:03 ` [PATCH 4/4] Userspace " Avi Kivity
2009-05-12 14:25 ` Beth Kon
2009-05-12 16:27 ` Beth Kon
2009-05-13 7:48 ` Avi Kivity
2009-05-13 7:50 ` Avi Kivity
2009-05-12 9:57 ` [PATCH 1/4] BIOS changes for configuring irq0->inti2 override (v3) Gleb Natapov
2009-05-12 13:59 ` [PATCH 1/4] BIOS changes for configuring irq0->inti2 override(v3) Beth Kon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1242062986-29383-4-git-send-email-eak@us.ibm.com \
--to=eak@us.ibm.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.