All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Ellerman <michael@ellerman.id.au>
To: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Matthew Wilcox <matthew@wil.cx>,
	Jesse Barnes <jbarnes@virtuousgeek.org>,
	"David S. Miller" <davem@davemloft.net>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI MSI: Yet another fix for MSI-X with NIU cards, v2
Date: Wed, 13 May 2009 16:31:26 +1000	[thread overview]
Message-ID: <1242196286.18059.88.camel@concordia> (raw)
In-Reply-To: <4A0A5556.9050209@jp.fujitsu.com>

[-- Attachment #1: Type: text/plain, Size: 2072 bytes --]

On Wed, 2009-05-13 at 14:06 +0900, Hidetoshi Seto wrote:
> The NIU device refuses to allow accesses to MSI-X registers before MSI-X
> is enabled.  This patch fixes the problem by moving the read & write the
> mask register (for preserved bits) to after MSI-X is enabled.
> 
> Reported-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
> ---
>  drivers/pci/msi.c |   21 ++++++++++++++++++---
>  1 files changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 6f2e629..44085e0 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -455,9 +455,7 @@ static int msix_capability_init(struct pci_dev *dev,
>  		entry->msi_attrib.default_irq = dev->irq;
>  		entry->msi_attrib.pos = pos;
>  		entry->mask_base = base;
> -		entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
> -					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
> -		msix_mask_irq(entry, 1);
> +		entry->masked = 1;
>  
>  		list_add_tail(&entry->list, &dev->msi_list);
>  	}
> @@ -493,6 +491,23 @@ static int msix_capability_init(struct pci_dev *dev,
>  	msix_set_enable(dev, 1);
>  	dev->msix_enabled = 1;
>  
> +	/*
> +	 * The states of Reserved bits[31:01] of Vector Control for MSI-X
> +	 * Table Entries must be 0.  However, for potential future use,
> +	 * software must preserve the value of these reserved bits.
> +	 * Refer PCI spec 3.0, 6.8.2.9.
> +	 *
> +	 * Note that there are some device that refuses access to MSI-X
> +	 * Table Entries before MSI-X is enabled.  Therefore we do it here. 
> +	 */
> +	list_for_each_entry(entry, &dev->msi_list, list) {
> +		int vector = entry->msi_attrib.entry_nr;
> +		entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
> +					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
> +		/* Make sure it is masked */
> +		msix_mask_irq(entry, 1);
> +	}
> +
>  	return 0;
>  }

That looks better to me, hopefully it fixes DaveM's device too :)

Acked-by: Michael Ellerman <michael@ellerman.id.au>

cheers
 


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

  reply	other threads:[~2009-05-13  6:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-08 13:13 [PATCH] Fix MSI-X with NIU cards Matthew Wilcox
2009-05-11  1:21 ` Michael Ellerman
2009-05-11  5:36   ` David Miller
2009-05-11 14:30     ` Michael Ellerman
2009-05-11 23:40       ` David Miller
2009-05-11 23:59         ` Jesse Barnes
2009-05-12  2:21         ` Michael Ellerman
2009-05-13 10:07           ` Matthew Wilcox
2009-05-13  4:06   ` Hidetoshi Seto
2009-05-13  4:40     ` Hidetoshi Seto
2009-05-13  4:49       ` Michael Ellerman
2009-05-13  4:10 ` [PATCH] PCI MSI: Yet another fix for " Hidetoshi Seto
2009-05-13  5:13   ` David Miller
2009-05-13  4:54 ` [PATCH] PCI MSI: Yet another fix for MSI-X with NIU cards, v2 Hidetoshi Seto
2009-05-13  5:06   ` Hidetoshi Seto
2009-05-13  6:31     ` Michael Ellerman [this message]
2009-05-13 18:43     ` Matthew Wilcox
2009-05-14  6:22       ` Hidetoshi Seto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1242196286.18059.88.camel@concordia \
    --to=michael@ellerman.id.au \
    --cc=davem@davemloft.net \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=matthew@wil.cx \
    --cc=seto.hidetoshi@jp.fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.