All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Noll <maan@systemlinux.org>
To: neilb@suse.de
Cc: raziebe@gmail.com, linux-raid@vger.kernel.org,
	Andre Noll <maan@systemlinux.org>
Subject: [PATCH] md: raid0: Make raid0_run() return a proper error code.
Date: Thu, 14 May 2009 12:43:51 +0200	[thread overview]
Message-ID: <1242297833-13908-5-git-send-email-maan@systemlinux.org> (raw)
In-Reply-To: <1242297833-13908-1-git-send-email-maan@systemlinux.org>

Currently raid0_run() always returns -ENOMEM on errors. This is
incorrect as running the array might fail for other reasons, for
example because not all component devices were available.

This patch changes create_strip_zones() so that it returns a proper
error code (either -ENOMEM or -EINVAL) rather than 1 on errors and
makes raid0_run(), its single caller, return that value instead
of -ENOMEM.

Signed-off-by: Andre Noll <maan@systemlinux.org>
---
 drivers/md/raid0.c |   17 +++++++++--------
 1 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 2401e94..0f4330f 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -106,12 +106,12 @@ static int create_strip_zones (mddev_t *mddev)
 	conf->strip_zone = kzalloc(sizeof(struct strip_zone)*
 				conf->nr_strip_zones, GFP_KERNEL);
 	if (!conf->strip_zone)
-		return 1;
+		return -ENOMEM;
 	conf->devlist = kzalloc(sizeof(mdk_rdev_t*)*
 				conf->nr_strip_zones*mddev->raid_disks,
 				GFP_KERNEL);
 	if (!conf->devlist)
-		return 1;
+		return -ENOMEM;
 
 	/* The first zone must contain all devices, so here we check that
 	 * there is a proper alignment of slots to devices and find them all
@@ -211,8 +211,8 @@ static int create_strip_zones (mddev_t *mddev)
 
 	printk(KERN_INFO "raid0: done.\n");
 	return 0;
- abort:
-	return 1;
+abort:
+	return -EINVAL;
 }
 
 /**
@@ -258,6 +258,7 @@ static sector_t raid0_size(mddev_t *mddev, sector_t sectors, int raid_disks)
 static int raid0_run(mddev_t *mddev)
 {
 	raid0_conf_t *conf;
+	int ret;
 
 	if (mddev->chunk_size == 0) {
 		printk(KERN_ERR "md/raid0: non-zero chunk size required.\n");
@@ -273,12 +274,13 @@ static int raid0_run(mddev_t *mddev)
 
 	conf = kmalloc(sizeof (raid0_conf_t), GFP_KERNEL);
 	if (!conf)
-		goto out;
+		return -ENOMEM;
 	mddev->private = (void *)conf;
  
 	conf->strip_zone = NULL;
 	conf->devlist = NULL;
-	if (create_strip_zones (mddev)) 
+	ret = create_strip_zones(mddev);
+	if (ret < 0)
 		goto out_free_conf;
 
 	/* calculate array device size */
@@ -310,8 +312,7 @@ out_free_conf:
 	kfree(conf->devlist);
 	kfree(conf);
 	mddev->private = NULL;
-out:
-	return -ENOMEM;
+	return ret;
 }
 
 static int raid0_stop (mddev_t *mddev)
-- 
1.5.4.3


  parent reply	other threads:[~2009-05-14 10:43 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-14 10:43 [PATCH 0/6] md: Remove the hash tables from raid0 Andre Noll
2009-05-14 10:43 ` [PATCH] md: raid0: Replace hash table lookup by looping over all strip_zones Andre Noll
2009-05-14 11:15   ` SandeepKsinha
2009-05-14 11:15   ` NeilBrown
2009-05-14 12:10     ` Andre Noll
2009-05-14 12:25       ` NeilBrown
2009-05-14 12:54         ` Sujit Karataparambil
2009-05-14 15:00           ` SandeepKsinha
2009-05-14 15:58         ` PATCH md [001:002]: raid0: fix chunk size to 4K*n granularity raz ben yehuda
2009-05-14 14:07           ` Andre Noll
2009-05-14 22:35           ` Neil Brown
2009-05-18 22:58             ` raz ben yehuda
2009-05-14 16:00         ` Subject: PATCH[002:002] md: raid0: dump raid configuration raz ben yehuda
2009-05-14 17:12         ` Subject: [PATCH] mdadm: raid0: support chunks of 4K*n for raid0 raz ben yehuda
2009-05-15  3:59           ` Sujit Karataparambil
2009-05-15  6:01             ` Raz
2009-05-15  6:45               ` Sujit Karataparambil
2009-05-15  8:39                 ` NeilBrown
2009-05-15 15:45                   ` Raz
2009-05-14 12:22     ` [PATCH] md: raid0: Replace hash table lookup by looping over all strip_zones Neil Brown
2009-05-14 15:51       ` raz ben yehuda
2009-05-14 20:38         ` NeilBrown
2009-05-15 13:18           ` Andre Noll
2009-05-15 17:30         ` Andre Noll
2009-05-15 21:19           ` Raz
2009-05-18  8:21             ` Andre Noll
2009-05-14 12:01   ` SandeepKsinha
2009-05-14 12:15     ` SandeepKsinha
2009-05-14 14:13   ` raz ben yehuda
2009-05-14 10:43 ` [PATCH] md: raid0: Remove hash table Andre Noll
2009-05-14 10:43 ` [PATCH] md: raid0: Remove hash spacing and sector shift Andre Noll
2009-05-14 10:43 ` Andre Noll [this message]
2009-05-14 11:21   ` [PATCH] md: raid0: Make raid0_run() return a proper error code NeilBrown
2009-05-14 11:42     ` Andre Noll
2009-05-14 10:43 ` [PATCH] md: raid0: Kfree() strip_zone and devlist in create_strip_zones() Andre Noll
2009-05-14 10:43 ` [PATCH] md: raid0: Simplify raid0_run() Andre Noll
2009-05-14 11:43   ` SandeepKsinha
2009-05-14 12:06     ` NeilBrown
2009-05-14 14:03   ` raz ben yehuda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1242297833-13908-5-git-send-email-maan@systemlinux.org \
    --to=maan@systemlinux.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=neilb@suse.de \
    --cc=raziebe@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.