All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-net-drivers@solarflare.com
Subject: [PATCH 3/3] sfc: Use generic XENPAK register definitions
Date: Fri, 15 May 2009 17:06:16 +0100	[thread overview]
Message-ID: <1242403576.3262.4.camel@achroite> (raw)
In-Reply-To: <1242403452.3262.0.camel@achroite>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 drivers/net/sfc/tenxpress.c |   16 +----------
 drivers/net/sfc/xenpack.h   |   57 -------------------------------------------
 drivers/net/sfc/xfp_phy.c   |    4 +-
 3 files changed, 4 insertions(+), 73 deletions(-)
 delete mode 100644 drivers/net/sfc/xenpack.h

diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 0421190..db723c5 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -44,18 +44,6 @@
  */
 #define MAX_BAD_LP_TRIES	(5)
 
-/* LASI Control */
-#define PMA_PMD_LASI_CTRL	36866
-#define PMA_PMD_LASI_STATUS	36869
-#define PMA_PMD_LS_ALARM_LBN	0
-#define PMA_PMD_LS_ALARM_WIDTH	1
-#define PMA_PMD_TX_ALARM_LBN	1
-#define PMA_PMD_TX_ALARM_WIDTH	1
-#define PMA_PMD_RX_ALARM_LBN	2
-#define PMA_PMD_RX_ALARM_WIDTH	1
-#define PMA_PMD_AN_ALARM_LBN	3
-#define PMA_PMD_AN_ALARM_WIDTH	1
-
 /* Extended control register */
 #define PMA_PMD_XCONTROL_REG	49152
 #define PMA_PMD_EXT_GMII_EN_LBN	1
@@ -579,8 +567,8 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 			change = true;
 	} else {
 		int status = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
-					   PMA_PMD_LASI_STATUS);
-		if (status & (1 << PMA_PMD_LS_ALARM_LBN))
+					   MDIO_PMA_LASI_STAT);
+		if (status & MDIO_PMA_LASI_LSALARM)
 			change = true;
 	}
 
diff --git a/drivers/net/sfc/xenpack.h b/drivers/net/sfc/xenpack.h
deleted file mode 100644
index 4e52286..0000000
--- a/drivers/net/sfc/xenpack.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_XENPACK_H
-#define EFX_XENPACK_H
-
-/* Exported functions from Xenpack standard PHY control */
-
-#include "mdio_10g.h"
-
-/****************************************************************************/
-/* XENPACK MDIO register extensions */
-#define MDIO_XP_LASI_RX_CTRL	(0x9000)
-#define MDIO_XP_LASI_TX_CTRL	(0x9001)
-#define MDIO_XP_LASI_CTRL	(0x9002)
-#define MDIO_XP_LASI_RX_STAT	(0x9003)
-#define MDIO_XP_LASI_TX_STAT	(0x9004)
-#define MDIO_XP_LASI_STAT	(0x9005)
-
-/* Control/Status bits */
-#define XP_LASI_LS_ALARM	(1 << 0)
-#define XP_LASI_TX_ALARM	(1 << 1)
-#define XP_LASI_RX_ALARM	(1 << 2)
-/* These two are Quake vendor extensions to the standard XENPACK defines */
-#define XP_LASI_LS_INTB		(1 << 3)
-#define XP_LASI_TEST		(1 << 7)
-
-/* Enable LASI interrupts for PHY */
-static inline void xenpack_enable_lasi_irqs(struct efx_nic *efx)
-{
-	/* Read to clear LASI status register */
-	efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_XP_LASI_STAT);
-
-	efx_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_XP_LASI_CTRL,
-		       XP_LASI_LS_ALARM);
-}
-
-/* Read the LASI interrupt status to clear the interrupt. */
-static inline int xenpack_clear_lasi_irqs(struct efx_nic *efx)
-{
-	/* Read to clear link status alarm */
-	return efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_XP_LASI_STAT);
-}
-
-/* Turn off LASI interrupts */
-static inline void xenpack_disable_lasi_irqs(struct efx_nic *efx)
-{
-	efx_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_XP_LASI_CTRL, 0);
-}
-
-#endif /* EFX_XENPACK_H */
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index aad2dca..bb2e6af 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -15,7 +15,6 @@
 #include <linux/delay.h>
 #include "efx.h"
 #include "mdio_10g.h"
-#include "xenpack.h"
 #include "phy.h"
 #include "falcon.h"
 
@@ -169,7 +168,8 @@ static int xfp_phy_init(struct efx_nic *efx)
 
 static void xfp_phy_clear_interrupt(struct efx_nic *efx)
 {
-	xenpack_clear_lasi_irqs(efx);
+	/* Read to clear link status alarm */
+	efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
 }
 
 static int xfp_link_ok(struct efx_nic *efx)

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.


  parent reply	other threads:[~2009-05-15 16:06 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-15 16:04 [PATCH 1/3] mdio: Add 10GBASE-T SNR register definition Ben Hutchings
2009-05-15 16:05 ` [PATCH 2/3] mdio: Add XENPAK LASI register definitions Ben Hutchings
2009-05-18  4:07   ` David Miller
2009-05-15 16:06 ` Ben Hutchings [this message]
2009-05-18  4:07   ` [PATCH 3/3] sfc: Use generic XENPAK " David Miller
2009-05-18  4:06 ` [PATCH 1/3] mdio: Add 10GBASE-T SNR register definition David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1242403576.3262.4.camel@achroite \
    --to=bhutchings@solarflare.com \
    --cc=davem@davemloft.net \
    --cc=linux-net-drivers@solarflare.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.