From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: Divy Le Ray <divy@chelsio.com>, netdev@vger.kernel.org
Subject: [PATCH 1/2] chelsio: Use generic XENPAK LASI register definitions
Date: Wed, 20 May 2009 00:21:07 +0100 [thread overview]
Message-ID: <1242775267.3198.8.camel@achroite> (raw)
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
This follows on from:
commit 1c5022eb408e5d9ce48ffbd93d6e34d6f397a1e9
Author: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri May 15 00:47:59 2009 +0100
mdio: Add XENPAK LASI register definitions
These registers were originally defined for XENPAK modules, but are
also implemented by many other 10G PHYs.
Ben.
drivers/net/chelsio/mv88x201x.c | 17 +++++++++--------
1 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c
index 29e0cba..d50907b 100644
--- a/drivers/net/chelsio/mv88x201x.c
+++ b/drivers/net/chelsio/mv88x201x.c
@@ -86,7 +86,8 @@ static int mv88x201x_reset(struct cphy *cphy, int wait)
static int mv88x201x_interrupt_enable(struct cphy *cphy)
{
/* Enable PHY LASI interrupts. */
- cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, 0x9002, 0x1);
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+ MDIO_PMA_LASI_LSALARM);
/* Enable Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
@@ -102,7 +103,7 @@ static int mv88x201x_interrupt_enable(struct cphy *cphy)
static int mv88x201x_interrupt_disable(struct cphy *cphy)
{
/* Disable PHY LASI interrupts. */
- cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, 0x9002, 0x0);
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0);
/* Disable Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
@@ -122,9 +123,9 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy)
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Required to read twice before clear takes affect. */
- cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, 0x9003, &val);
- cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, 0x9004, &val);
- cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, 0x9005, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
/* Read this register after the others above it else
* the register doesn't clear correctly.
@@ -135,12 +136,12 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy)
/* Clear link status. */
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
/* Clear PHY LASI interrupts. */
- cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, 0x9005, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Do it again. */
- cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, 0x9003, &val);
- cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, 0x9004, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
#endif
/* Clear Marvell interrupts through Elmer0. */
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next reply other threads:[~2009-05-19 23:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-19 23:21 Ben Hutchings [this message]
2009-05-21 1:51 ` [PATCH 1/2] chelsio: Use generic XENPAK LASI register definitions Divy Le Ray
2009-05-21 3:52 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1242775267.3198.8.camel@achroite \
--to=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=divy@chelsio.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.