Re: Weird 5200/mtd-ram problem

["Albrecht Dreß" <albrecht.dress@arcor.de>]

[-- Attachment #1: Type: text/plain, Size: 1150 bytes --]

Am 20.05.09 16:23 schrieb(en) Gary Thomas:
> > In Linux, when I write the file to /dev/mtdx, the last dword of  
> each block is broken, e.g. when running "dd if=pattern of=/dev/mtd5  
> bs=512" the dword's at offset 0x1fc, 0x3fc, ... are 0x0000aaaa  
> (instead of 0x0055aaff), if I use bs=1024 the dwords at 0x3fc, 0x7fc,  
> ... show this value, if I use bs=4096 the dword at 0xffc shows this  
> value, etc.  I looked at the CS/WR lines with a scope, and I couldn't  
> see anything special.  The timing should be fine, as u-boot uses the  
> same as Linux.
> >
> > Any idea what goes wrong here?  I guessed I missed something in the  
> LPB setup...
> 
> Check your cache setup - the BDI is most certainly not accessing this  
> via the Data cache whereas Linux probably will be.

Hmm, yes - I didn't touch the vanilla Lite5200B Linux setup there,  
which has a flash chip at cs1...

If it is really a cache problem (I'm away now from my test board) -  
isn't a sync sufficient after doing the copy to the external ram  
(lpb/cs1)?  What is the proper approach for devices attached to the  
localbus?

Thanks, Albrecht.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]