All of lore.kernel.org
 help / color / mirror / Atom feed
From: jhmoodie@telkomsa.net
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Gigabyte GT-P8000 dvb-t / analog / fm radio - pci
Date: Fri, 22 May 2009 13:42:43 -0700	[thread overview]
Message-ID: <1243024963.14790.1316818399@webmail.messagingengine.com> (raw)

Does anyone have any information on the support status of this card? Or
perhaps any hints I might try to get it working?

I have built and installed the latest V4L-DVB kernel driver modules, but
no luck.

I noticed windows installs Philips 3xhybrid drivers if this helps...

Product website:
http://www.gigabyte.com.tw/Products/TVCard/Products_Spec.aspx?ClassValue=TV+Card&ProductID=2757&ProductName=GT-P8000

Tuner NXP 18271
Decoder NXP 7131E

lspci -vnn:
00:09.0 Multimedia controller [0480]: Philips Semiconductors
SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
        Subsystem: Giga-byte Technology Device [1458:9004]
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at e6000000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
        Kernel driver in use: saa7134
        Kernel modules: saa7134

dmesg output:
[ 3089.801191] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 3089.801419] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 11,
latency: 32, mmio: 0xe6000000
[ 3089.801443] saa7133[0]: subsystem: 1458:9004, board: UNKNOWN/GENERIC
[card=0,autodetected]
[ 3089.801656] saa7133[0]: board init: gpio is 40000
[ 3089.952088] saa7133[0]: i2c eeprom 00: 58 14 04 90 54 20 1c 00 43 43
a9
1c 55 d2 b2 92
[ 3089.952125] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952153] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff
00
b3 ff ff ff ff
[ 3089.952180] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952206] saa7133[0]: i2c eeprom 40: 50 35 00 c0 96 10 05 32 d5 15
0e
00 ff ff ff ff
[ 3089.952233] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952260] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952287] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952314] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952340] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952367] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952394] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952421] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952447] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952474] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.952501] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff
ff ff ff ff ff
[ 3089.953430] saa7133[0]: registered device video0 [v4l2]
[ 3089.953507] saa7133[0]: registered device vbi0
[ 3090.023006] saa7134 ALSA driver for DMA sound loaded
[ 3090.023158] saa7133[0]/alsa: saa7133[0] at 0xe6000000 irq 11
registered
as card -2

-- 
  
  raincloud@fastmail.fm

-- 
http://www.fastmail.fm - Email service worth paying for. Try it for free


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2009-05-22 20:42 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-22 20:42 jhmoodie [this message]
2009-06-23 15:36 ` [linux-dvb] Gigabyte GT-P8000 dvb-t / analog / fm radio - pci c kuruwita
2009-06-23 21:11   ` hermann pitton
2009-06-24 16:31     ` John Moodie
2009-06-24 20:58       ` hermann pitton
  -- strict thread matches above, loose matches on Subject: below --
2009-07-16 23:40 Samúel Jón Gunnarsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1243024963.14790.1316818399@webmail.messagingengine.com \
    --to=jhmoodie@telkomsa.net \
    --cc=linux-dvb@linuxtv.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.