From: Shane Huang <shane.huang@amd.com>
To: jgarzik@pobox.com, tj@kernel.org
Cc: linux-ide@vger.kernel.org, "Huang, Shane" <Shane.Huang@amd.com>
Subject: RE: [PATCH] Add AMD SB900 SATA/IDE controller device IDs
Date: Wed, 29 Jul 2009 11:34:49 +0800 [thread overview]
Message-ID: <1248838489.3470.7.camel@zm-desktop> (raw)
Update the patch with Tejun's request to add RAID comment.
=== CUT HERE ===
Add AMD SB900 SATA/IDE controller device IDs.
Signed-off-by: Shane Huang <shane.huang@amd.com>
diff -ruN a/drivers/ata/ahci.c b/drivers/ata/ahci.c
--- a/drivers/ata/ahci.c 2009-07-27 18:55:43.000000000 +0800
+++ b/drivers/ata/ahci.c 2009-07-28 16:50:20.000000000 +0800
@@ -533,6 +533,12 @@
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
+ /* AMD */
+ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */
+ /* AMD is using RAID class only for ahci controllers */
+ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
+
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
diff -ruN a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
--- a/drivers/ata/pata_atiixp.c 2009-07-27 18:55:56.000000000 +0800
+++ b/drivers/ata/pata_atiixp.c 2009-07-27 18:56:01.000000000 +0800
@@ -245,6 +245,7 @@
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), },
{ },
};
diff -ruN a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
--- a/drivers/ide/atiixp.c 2009-07-27 18:57:07.000000000 +0800
+++ b/drivers/ide/atiixp.c 2009-07-27 18:57:12.000000000 +0800
@@ -177,6 +177,7 @@
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff -ruN a/drivers/pci/quirks.c b/drivers/pci/quirks.c
--- a/drivers/pci/quirks.c 2009-07-27 18:56:41.000000000 +0800
+++ b/drivers/pci/quirks.c 2009-07-27 18:56:46.000000000 +0800
@@ -992,7 +992,7 @@
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
{
- /* set sb600/sb700/sb800 sata to ahci mode */
+ /* set SBX00 SATA in IDE mode to AHCI mode */
u8 tmp;
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
@@ -1011,6 +1011,8 @@
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
diff -ruN a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h 2009-07-27 18:54:41.000000000 +0800
+++ b/include/linux/pci_ids.h 2009-07-27 18:55:17.000000000 +0800
@@ -376,6 +376,9 @@
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
+/* AMD SB Chipset */
+#define PCI_DEVICE_ID_AMD_SB900_IDE 0x780c
+#define PCI_DEVICE_ID_AMD_SB900_SATA_IDE 0x7800
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
next reply other threads:[~2009-07-29 3:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-29 3:34 Shane Huang [this message]
2009-07-29 4:02 ` [PATCH] Add AMD SB900 SATA/IDE controller device IDs Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2009-07-28 6:29 Shane Huang
2009-07-28 7:52 ` Tejun Heo
2009-07-29 0:56 ` Jeff Garzik
2009-07-29 2:32 ` Huang, Shane
2009-07-29 2:42 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248838489.3470.7.camel@zm-desktop \
--to=shane.huang@amd.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.