All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Galbraith <efault@gmx.de>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org,
	LKML <linux-kernel@vger.kernel.org>,
	"John W. Linville" <linville@tuxdriver.com>
Subject: [rt2800 doesn't authenticate (wpapsk/tkip)] Re: [wireless] rt2870sta BUGs on shutdown, 2.6.30.2->git.today+git.wireless.today
Date: Thu, 30 Jul 2009 14:11:56 +0200	[thread overview]
Message-ID: <1248955916.7995.47.camel@marge.simson.net> (raw)
In-Reply-To: <1248948326.8823.4.camel@marge.simson.net>

On Thu, 2009-07-30 at 12:05 +0200, Mike Galbraith wrote:
> On Thu, 2009-07-30 at 11:55 +0200, Johannes Berg wrote:
> > On Thu, 2009-07-30 at 11:44 +0200, Mike Galbraith wrote:
> > > On Thu, 2009-07-30 at 11:29 +0200, Johannes Berg wrote:
> > > > On Thu, 2009-07-30 at 11:22 +0200, Mike Galbraith wrote:
> > > > 
> > > > > drivers/staging/rt2870/../rt2860/sta_ioctl.c
> > > > 
> > > > Sorry, but that '/staging/' thing in there means we cannot support this.
> > > > If you must, take your query to the staging list,
> > > > devel@driverdev.osuosl.org (according to MAINTAINERS).
> > > 
> > > Forwarded, thanks.
> > > 
> > > ....hm.  Does "If you must" mean reports aren't welcome?
> > 
> > To be honest, I don't know. I'd rather see people use the rt2x00 code
> > instead of spending time cleaning up that mess (the code you've pasted
> > was pretty bad!). But you may or may not find somebody who cares about
> > that, just rather unlikely on this list.
> 
> Understood (and yeah, the source is.. not pretty).  Sorry for the noise.
> 
> WRT rt2x00 with this adapter, I tried it, was a nogo.  If I find time,
> I'll reconfigure/report.

This is nogo with rt2x00 driver fwiw.  Maybe some simple configuration
thing, but I'm having no luck getting the bugger to work.

[   12.942335] phy0: Selected rate control algorithm 'minstrel'
[   12.942440] Registered led device: rt2800usb-phy0::radio
[   12.955279] Registered led device: rt2800usb-phy0::assoc
[   12.968003] Registered led device: rt2800usb-phy0::quality
[   12.981183] usbcore: registered new interface driver rt2800usb

[   33.032056] rt2800usb 1-5:1.0: firmware: requesting rt2870.bin
[   33.161552] input: rt2800usb as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input4
[   33.347130] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.513078] eth0: no IPv6 routers present
[   35.935289] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   35.937306] wlan0: authenticated
[   35.937309] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   35.942551] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   35.942555] wlan0: associated
[   35.950948] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   37.314470] mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary
[   39.937271] wlan0: deauthenticated (Reason: 1)
[   40.936521] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   40.939152] wlan0 direct probe responded
[   40.939155] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   40.941145] wlan0: authenticated
[   40.941148] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   40.945904] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   40.945909] wlan0: associated
[   44.947499] wlan0: deauthenticated (Reason: 1)
[   45.944034] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   45.946623] wlan0 direct probe responded
[   45.946627] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   45.948744] wlan0: authenticated
[   45.948747] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   45.953996] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   45.953999] wlan0: associated
[   46.376015] wlan0: no IPv6 routers present
[   49.947986] wlan0: deauthenticated (Reason: 1)
[   50.944545] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   50.947230] wlan0 direct probe responded
[   50.947234] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   50.949219] wlan0: authenticated
[   50.949222] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   50.954473] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   50.954477] wlan0: associated
[   54.958220] wlan0: deauthenticated (Reason: 1)
[   55.956527] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   55.959137] wlan0 direct probe responded
[   55.959140] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   55.961123] wlan0: authenticated
[   55.961126] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   55.966502] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   55.966505] wlan0: associated
[   59.968460] wlan0: deauthenticated (Reason: 1)
[   60.968032] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   60.970625] wlan0 direct probe responded
[   60.970628] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   60.972741] wlan0: authenticated
[   60.972743] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   60.978499] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   60.978502] wlan0: associated
[   64.978212] wlan0: deauthenticated (Reason: 1)
[   65.976524] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   65.979117] wlan0 direct probe responded
[   65.979119] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   65.981120] wlan0: authenticated
[   65.981124] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   65.986501] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   65.986505] wlan0: associated
[   69.988830] wlan0: deauthenticated (Reason: 1)
[   70.988546] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   70.991121] wlan0 direct probe responded
[   70.991124] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   70.993237] wlan0: authenticated
[   70.993239] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   70.998494] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   70.998498] wlan0: associated
[   74.998070] wlan0: deauthenticated (Reason: 1)
[   75.996510] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   75.999123] wlan0 direct probe responded
[   75.999127] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   76.001239] wlan0: authenticated
[   76.001242] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   76.006745] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   76.006749] wlan0: associated
[   80.007943] wlan0: deauthenticated (Reason: 1)
[   81.008508] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   81.011115] wlan0 direct probe responded
[   81.011118] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   81.013111] wlan0: authenticated
[   81.013115] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   81.018494] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   81.018498] wlan0: associated
[   85.017825] wlan0: deauthenticated (Reason: 1)
[   86.016508] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[   86.019115] wlan0 direct probe responded
[   86.019118] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   86.021230] wlan0: authenticated
[   86.021233] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   86.026610] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   86.026613] wlan0: associated
[   96.027614] wlan0: disassociating by local choice (reason=3)
[   96.030483] wlan0: deauthenticated (Reason: 6)
[   97.485736] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[   97.487617] wlan0: authenticated
[   97.487620] wlan0: associate with AP 00:1a:4f:9a:d0:12
[   97.492871] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[   97.492875] wlan0: associated
[  101.487940] wlan0: deauthenticated (Reason: 1)
[  102.484011] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  102.486625] wlan0 direct probe responded
[  102.486629] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[  102.488742] wlan0: authenticated
[  102.488746] wlan0: associate with AP 00:1a:4f:9a:d0:12
[  102.493993] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[  102.493996] wlan0: associated
[  112.496478] wlan0: disassociating by local choice (reason=3)
[  112.499359] wlan0: deauthenticated (Reason: 6)
[  123.951239] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[  123.953248] wlan0: authenticated
[  123.953252] wlan0: associate with AP 00:1a:4f:9a:d0:12
[  123.958499] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[  123.958503] wlan0: associated
[  127.957566] wlan0: deauthenticated (Reason: 1)
[  128.956012] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  128.958616] wlan0 direct probe responded
[  128.958619] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[  128.960743] wlan0: authenticated
[  128.960746] wlan0: associate with AP 00:1a:4f:9a:d0:12
[  128.966121] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[  128.966125] wlan0: associated
[  132.967815] wlan0: deauthenticated (Reason: 1)
[  133.964011] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  133.966613] wlan0 direct probe responded
[  133.966616] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[  133.968740] wlan0: authenticated
[  133.968744] wlan0: associate with AP 00:1a:4f:9a:d0:12
[  133.973868] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[  133.973871] wlan0: associated
[  137.967813] wlan0: deauthenticated (Reason: 1)
[  138.964014] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  138.966613] wlan0 direct probe responded
[  138.966616] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[  138.968738] wlan0: authenticated
[  138.968741] wlan0: associate with AP 00:1a:4f:9a:d0:12
[  138.973996] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[  138.973999] wlan0: associated
[  142.967685] wlan0: deauthenticated (Reason: 1)
[  143.964009] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  143.966609] wlan0 direct probe responded
[  143.966612] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[  143.968736] wlan0: authenticated
[  143.968740] wlan0: associate with AP 00:1a:4f:9a:d0:12
[  143.973988] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[  143.973991] wlan0: associated
[  147.967736] wlan0: deauthenticated (Reason: 1)
[  148.964016] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  148.966607] wlan0 direct probe responded
[  148.966609] wlan0: authenticate with AP 00:1a:4f:9a:d0:12
[  148.968734] wlan0: authenticated
[  148.968736] wlan0: associate with AP 00:1a:4f:9a:d0:12
[  148.973983] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1)
[  148.973985] wlan0: associated
[  152.967813] wlan0: deauthenticated (Reason: 1)
[  153.964009] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  154.164015] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 2
[  154.364015] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 3
[  154.564009] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 timed out
[  181.899242] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1
[  182.096012] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 2
[  182.296011] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 3
[  182.496011] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 timed out
[  200.602027] usbcore: deregistering interface driver rt2800usb



  reply	other threads:[~2009-07-30 12:12 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-30  9:22 [wireless] rt2870sta BUGs on shutdown, 2.6.30.2->git.today+git.wireless.today Mike Galbraith
2009-07-30  9:29 ` Johannes Berg
2009-07-30  9:44   ` Mike Galbraith
2009-07-30  9:55     ` Johannes Berg
2009-07-30 10:05       ` Mike Galbraith
2009-07-30 12:11         ` Mike Galbraith [this message]
2009-08-01  5:25           ` rt2800usb: memory corruption? Mike Galbraith
2009-08-01 10:55             ` Mike Galbraith
2009-08-02  0:21               ` Pavel Roskin
2009-08-02  5:16                 ` Mike Galbraith
2009-08-02  6:29                   ` Mike Galbraith
2009-08-02  6:47                     ` Mike Galbraith
2009-08-06 10:12                       ` Pavel Roskin
2009-07-30 10:06       ` [wireless] rt2870sta BUGs on shutdown, 2.6.30.2->git.today+git.wireless.today Luis Correia
2009-07-30 13:17         ` Bartlomiej Zolnierkiewicz
2009-07-30 16:52           ` Ivo van Doorn
2009-07-30 17:09             ` Mike Galbraith
2009-07-30 17:11             ` Johannes Berg
2009-07-30 17:26               ` Greg KH
2009-07-30 18:04                 ` Dan Williams
2009-07-30 18:13                   ` Greg KH
2009-08-02  9:10         ` Peter Teoh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1248955916.7995.47.camel@marge.simson.net \
    --to=efault@gmx.de \
    --cc=johannes@sipsolutions.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.