From: ratbert.chuang at gmail.com <ratbert.chuang@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 1/3] arm: A320: driver for FTMAC100 ethernet controller
Date: Mon, 10 Aug 2009 11:00:00 +0800 [thread overview]
Message-ID: <1249873200-22478-1-git-send-email-ratbert.chuang@gmail.com> (raw)
From: Po-Yu Chuang <ratbert@faraday-tech.com>
This patch adds an FTMAC100 ethernet driver for Faraday A320 evaluation board.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
---
drivers/net/Makefile | 1 +
drivers/net/ftmac100.c | 278 ++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/ftmac100.h | 154 ++++++++++++++++++++++++++
include/netdev.h | 1 +
4 files changed, 434 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/ftmac100.c
create mode 100644 drivers/net/ftmac100.h
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 34b56d8..1c6e402 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -39,6 +39,7 @@ COBJS-$(CONFIG_EEPRO100) += eepro100.o
COBJS-$(CONFIG_ENC28J60) += enc28j60.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
+COBJS-$(CONFIG_FTMAC100) += ftmac100.o
COBJS-$(CONFIG_GRETH) += greth.o
COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o
diff --git a/drivers/net/ftmac100.c b/drivers/net/ftmac100.c
new file mode 100644
index 0000000..2328cb5
--- /dev/null
+++ b/drivers/net/ftmac100.c
@@ -0,0 +1,278 @@
+/*
+ * Faraday FTMAC100 Ethernet
+ *
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+
+#include "ftmac100.h"
+
+#define ETH_ZLEN 60
+
+struct ftmac100_data {
+ volatile struct ftmac100_txdes txdes[1];
+ volatile struct ftmac100_rxdes rxdes[PKTBUFSRX];
+ int rx_index;
+};
+
+/*
+ * Reset MAC
+ */
+static void ftmac100_reset (struct eth_device *dev)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+
+ debug ("%s()\n", __func__);
+
+ writel (FTMAC100_MACCR_SW_RST, &ftmac100->maccr);
+
+ while (readl (&ftmac100->maccr) & FTMAC100_MACCR_SW_RST)
+ ;
+}
+
+/*
+ * Set MAC address
+ */
+static void ftmac100_set_mac (struct eth_device *dev, const unsigned char *mac)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+ unsigned int maddr = mac[0] << 8 | mac[1];
+ unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5];
+
+ debug ("%s(%x %x)\n", __func__, maddr, laddr);
+
+ writel (maddr, &ftmac100->mac_madr);
+ writel (laddr, &ftmac100->mac_ladr);
+}
+
+static void ftmac100_set_mac_from_env (struct eth_device *dev)
+{
+ eth_getenv_enetaddr ("ethaddr", dev->enetaddr);
+
+ ftmac100_set_mac (dev, dev->enetaddr);
+}
+
+/*
+ * disable transmitter, receiver
+ */
+static void ftmac100_halt (struct eth_device *dev)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+
+ debug ("%s()\n", __func__);
+
+ writel (0, &ftmac100->maccr);
+}
+
+static int ftmac100_init (struct eth_device *dev, bd_t *bd)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+ struct ftmac100_data *priv = dev->priv;
+ volatile struct ftmac100_txdes *txdes = priv->txdes;
+ volatile struct ftmac100_rxdes *rxdes = priv->rxdes;
+ unsigned int maccr;
+ int i;
+
+ debug ("%s()\n", __func__);
+
+ ftmac100_reset (dev);
+
+ /* set the ethernet address */
+
+ ftmac100_set_mac_from_env (dev);
+
+ /* disable all interrupts */
+
+ writel (0, &ftmac100->imr);
+
+ /* initialize descriptors */
+
+ priv->rx_index = 0;
+
+ txdes[0].txdes1 = FTMAC100_TXDES1_EDOTR;
+ rxdes[PKTBUFSRX - 1].rxdes1 = FTMAC100_RXDES1_EDORR;
+
+ for (i = 0; i < PKTBUFSRX; i++) {
+ /* RXBUF_BADR */
+ rxdes[i].rxdes2 = (unsigned int)NetRxPackets[i];
+ rxdes[i].rxdes1 |= FTMAC100_RXDES1_RXBUF_SIZE (PKTSIZE_ALIGN);
+ rxdes[i].rxdes0 = FTMAC100_RXDES0_RXDMA_OWN;
+ }
+
+ /* transmit ring */
+
+ writel ((unsigned int)txdes, &ftmac100->txr_badr);
+
+ /* receive ring */
+
+ writel ((unsigned int)rxdes, &ftmac100->rxr_badr);
+
+ /* poll receive descriptor automatically */
+
+ writel (FTMAC100_APTC_RXPOLL_CNT (1), &ftmac100->aptc);
+
+ /* enable transmitter, receiver */
+
+ maccr = FTMAC100_MACCR_XMT_EN |
+ FTMAC100_MACCR_RCV_EN |
+ FTMAC100_MACCR_XDMA_EN |
+ FTMAC100_MACCR_RDMA_EN |
+ FTMAC100_MACCR_CRC_APD |
+ FTMAC100_MACCR_ENRX_IN_HALFTX |
+ FTMAC100_MACCR_RX_RUNT |
+ FTMAC100_MACCR_RX_BROADPKT;
+
+ writel (maccr, &ftmac100->maccr);
+
+ return 0;
+}
+
+/*
+ * Get a data block via Ethernet
+ */
+static int ftmac100_recv (struct eth_device *dev)
+{
+ struct ftmac100_data *priv = dev->priv;
+ volatile struct ftmac100_rxdes *curr_des;
+ unsigned short rxlen;
+
+ curr_des = &priv->rxdes[priv->rx_index];
+
+ if (curr_des->rxdes0 & FTMAC100_RXDES0_RXDMA_OWN)
+ return -1;
+
+ if (curr_des->rxdes0 & (FTMAC100_RXDES0_RX_ERR |
+ FTMAC100_RXDES0_CRC_ERR |
+ FTMAC100_RXDES0_FTL |
+ FTMAC100_RXDES0_RUNT |
+ FTMAC100_RXDES0_RX_ODD_NB)) {
+ return -1;
+ }
+
+ rxlen = FTMAC100_RXDES0_RFL (curr_des->rxdes0);
+
+ debug ("%s(): RX buffer %d, %x received\n",
+ __func__, priv->rx_index, rxlen);
+
+ /* pass the packet up to the protocol layers. */
+
+ NetReceive ((void *)curr_des->rxdes2, rxlen);
+
+ /* release buffer to DMA */
+
+ curr_des->rxdes0 |= FTMAC100_RXDES0_RXDMA_OWN;
+
+ priv->rx_index = (priv->rx_index + 1) % PKTBUFSRX;
+
+ return 0;
+}
+
+/*
+ * Send a data block via Ethernet
+ */
+static int
+ftmac100_send (struct eth_device *dev, volatile void *packet, int length)
+{
+ struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase;
+ struct ftmac100_data *priv = dev->priv;
+ volatile struct ftmac100_txdes *curr_des = priv->txdes;
+ int tmo;
+
+ if (curr_des->txdes0 & FTMAC100_TXDES0_TXDMA_OWN) {
+ debug ("%s(): no TX descriptor available\n", __func__);
+ return -1;
+ }
+
+ debug ("%s(%x, %x)\n", __func__, (int)packet, length);
+
+ length = (length < ETH_ZLEN) ? ETH_ZLEN : length;
+
+ /* initiate a transmit sequence */
+
+ curr_des->txdes2 = (unsigned int)packet; /* TXBUF_BADR */
+
+ curr_des->txdes1 &= FTMAC100_TXDES1_EDOTR;
+ curr_des->txdes1 |= FTMAC100_TXDES1_FTS |
+ FTMAC100_TXDES1_LTS |
+ FTMAC100_TXDES1_TXBUF_SIZE (length);
+
+ curr_des->txdes0 = FTMAC100_TXDES0_TXDMA_OWN;
+
+ /* start transmit */
+
+ writel (1, &ftmac100->txpd);
+
+ /* wait for transfer to succeed */
+
+ tmo = get_timer (0) + 5 * CONFIG_SYS_HZ;
+ while (curr_des->txdes0 & FTMAC100_TXDES0_TXDMA_OWN) {
+ if (get_timer (0) >= tmo) {
+ debug ("%s(): timed out\n", __func__);
+ return -1;
+ }
+ }
+
+ debug ("%s(): packet sent\n", __func__);
+
+ return 0;
+}
+
+int ftmac100_initialize (bd_t *bd)
+{
+ struct eth_device *dev;
+ struct ftmac100_data *priv;
+
+ dev = malloc (sizeof *dev);
+ if (!dev) {
+ printf ("%s(): failed to allocate dev\n", __func__);
+ goto out;
+ }
+
+ /* Transmit and receive descriptors should align to 16 bytes */
+
+ priv = memalign (16, sizeof (struct ftmac100_data));
+ if (!priv) {
+ printf ("%s(): failed to allocate priv\n", __func__);
+ goto free_dev;
+ }
+
+ memset (dev, 0, sizeof (*dev));
+ memset (priv, 0, sizeof (*priv));
+
+ sprintf (dev->name, "FTMAC100");
+ dev->iobase = CONFIG_FTMAC100_BASE;
+ dev->init = ftmac100_init;
+ dev->halt = ftmac100_halt;
+ dev->send = ftmac100_send;
+ dev->recv = ftmac100_recv;
+ dev->priv = priv;
+
+ eth_register (dev);
+
+ return 1;
+
+free_dev:
+ free (dev);
+out:
+ return 0;
+}
diff --git a/drivers/net/ftmac100.h b/drivers/net/ftmac100.h
new file mode 100644
index 0000000..21142d9
--- /dev/null
+++ b/drivers/net/ftmac100.h
@@ -0,0 +1,154 @@
+/*
+ * Faraday FTMAC100 Ethernet
+ *
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __FTMAC100_H
+#define __FTMAC100_H
+
+struct ftmac100 {
+ unsigned int isr; /* 0x00 */
+ unsigned int imr; /* 0x04 */
+ unsigned int mac_madr; /* 0x08 */
+ unsigned int mac_ladr; /* 0x0c */
+ unsigned int maht0; /* 0x10 */
+ unsigned int maht1; /* 0x14 */
+ unsigned int txpd; /* 0x18 */
+ unsigned int rxpd; /* 0x1c */
+ unsigned int txr_badr; /* 0x20 */
+ unsigned int rxr_badr; /* 0x24 */
+ unsigned int itc; /* 0x28 */
+ unsigned int aptc; /* 0x2c */
+ unsigned int dblac; /* 0x30 */
+ unsigned int pad1[3]; /* 0x34 - 0x3c */
+ unsigned int pad2[16]; /* 0x40 - 0x7c */
+ unsigned int pad3[2]; /* 0x80 - 0x84 */
+ unsigned int maccr; /* 0x88 */
+ unsigned int macsr; /* 0x8c */
+ unsigned int phycr; /* 0x90 */
+ unsigned int phywdata; /* 0x94 */
+ unsigned int fcr; /* 0x98 */
+ unsigned int bpr; /* 0x9c */
+ unsigned int pad4[8]; /* 0xa0 - 0xbc */
+ unsigned int pad5; /* 0xc0 */
+ unsigned int ts; /* 0xc4 */
+ unsigned int dmafifos; /* 0xc8 */
+ unsigned int tm; /* 0xcc */
+ unsigned int pad6; /* 0xd0 */
+ unsigned int tx_mcol_scol; /* 0xd4 */
+ unsigned int rpf_aep; /* 0xd8 */
+ unsigned int xm_pg; /* 0xdc */
+ unsigned int runt_tlcc; /* 0xe0 */
+ unsigned int crcer_ftl; /* 0xe4 */
+ unsigned int rlc_rcc; /* 0xe8 */
+ unsigned int broc; /* 0xec */
+ unsigned int mulca; /* 0xf0 */
+ unsigned int rp; /* 0xf4 */
+ unsigned int xp; /* 0xf8 */
+};
+
+/*
+ * Interrupt status register & interrupt mask register
+ */
+#define FTMAC100_INT_RPKT_FINISH (1 << 0)
+#define FTMAC100_INT_NORXBUF (1 << 1)
+#define FTMAC100_INT_XPKT_FINISH (1 << 2)
+#define FTMAC100_INT_NOTXBUF (1 << 3)
+#define FTMAC100_INT_XPKT_OK (1 << 4)
+#define FTMAC100_INT_XPKT_LOST (1 << 5)
+#define FTMAC100_INT_RPKT_SAV (1 << 6)
+#define FTMAC100_INT_RPKT_LOST (1 << 7)
+#define FTMAC100_INT_AHB_ERR (1 << 8)
+#define FTMAC100_INT_PHYSTS_CHG (1 << 9)
+
+/*
+ * Automatic polling timer control register
+ */
+#define FTMAC100_APTC_RXPOLL_CNT(x) (((x) & 0xf) << 0)
+#define FTMAC100_APTC_RXPOLL_TIME_SEL (1 << 4)
+#define FTMAC100_APTC_TXPOLL_CNT(x) (((x) & 0xf) << 8)
+#define FTMAC100_APTC_TXPOLL_TIME_SEL (1 << 12)
+
+/*
+ * MAC control register
+ */
+#define FTMAC100_MACCR_XDMA_EN (1 << 0)
+#define FTMAC100_MACCR_RDMA_EN (1 << 1)
+#define FTMAC100_MACCR_SW_RST (1 << 2)
+#define FTMAC100_MACCR_LOOP_EN (1 << 3)
+#define FTMAC100_MACCR_CRC_DIS (1 << 4)
+#define FTMAC100_MACCR_XMT_EN (1 << 5)
+#define FTMAC100_MACCR_ENRX_IN_HALFTX (1 << 6)
+#define FTMAC100_MACCR_RCV_EN (1 << 8)
+#define FTMAC100_MACCR_HT_MULTI_EN (1 << 9)
+#define FTMAC100_MACCR_RX_RUNT (1 << 10)
+#define FTMAC100_MACCR_RX_FTL (1 << 11)
+#define FTMAC100_MACCR_RCV_ALL (1 << 12)
+#define FTMAC100_MACCR_CRC_APD (1 << 14)
+#define FTMAC100_MACCR_FULLDUP (1 << 15)
+#define FTMAC100_MACCR_RX_MULTIPKT (1 << 16)
+#define FTMAC100_MACCR_RX_BROADPKT (1 << 17)
+
+/*
+ * Transmit descriptor, aligned to 16 bytes
+ */
+struct ftmac100_txdes {
+ unsigned int txdes0;
+ unsigned int txdes1;
+ unsigned int txdes2; /* TXBUF_BADR */
+ unsigned int txdes3; /* not used by HW */
+} __attribute__ ((aligned(16)));
+
+#define FTMAC100_TXDES0_TXPKT_LATECOL (1 << 0)
+#define FTMAC100_TXDES0_TXPKT_EXSCOL (1 << 1)
+#define FTMAC100_TXDES0_TXDMA_OWN (1 << 31)
+
+#define FTMAC100_TXDES1_TXBUF_SIZE(x) ((x) & 0x7ff)
+#define FTMAC100_TXDES1_LTS (1 << 27)
+#define FTMAC100_TXDES1_FTS (1 << 28)
+#define FTMAC100_TXDES1_TX2FIC (1 << 29)
+#define FTMAC100_TXDES1_TXIC (1 << 30)
+#define FTMAC100_TXDES1_EDOTR (1 << 31)
+
+/*
+ * Receive descriptor, aligned to 16 bytes
+ */
+struct ftmac100_rxdes {
+ unsigned int rxdes0;
+ unsigned int rxdes1;
+ unsigned int rxdes2; /* RXBUF_BADR */
+ unsigned int rxdes3; /* not used by HW */
+} __attribute__ ((aligned(16)));
+
+#define FTMAC100_RXDES0_RFL(des) ((des) & 0x7ff)
+#define FTMAC100_RXDES0_MULTICAST (1 << 16)
+#define FTMAC100_RXDES0_BROADCAST (1 << 17)
+#define FTMAC100_RXDES0_RX_ERR (1 << 18)
+#define FTMAC100_RXDES0_CRC_ERR (1 << 19)
+#define FTMAC100_RXDES0_FTL (1 << 20)
+#define FTMAC100_RXDES0_RUNT (1 << 21)
+#define FTMAC100_RXDES0_RX_ODD_NB (1 << 22)
+#define FTMAC100_RXDES0_LRS (1 << 28)
+#define FTMAC100_RXDES0_FRS (1 << 29)
+#define FTMAC100_RXDES0_RXDMA_OWN (1 << 31)
+
+#define FTMAC100_RXDES1_RXBUF_SIZE(x) ((x) & 0x7ff)
+#define FTMAC100_RXDES1_EDORR (1 << 31)
+
+#endif /* __FTMAC100_H */
diff --git a/include/netdev.h b/include/netdev.h
index 3e66586..50329a3 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -51,6 +51,7 @@ int eepro100_initialize(bd_t *bis);
int eth_3com_initialize (bd_t * bis);
int fec_initialize (bd_t *bis);
int fecmxc_initialize (bd_t *bis);
+int ftmac100_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);
--
1.6.3.3
next reply other threads:[~2009-08-10 3:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-10 3:00 ratbert.chuang at gmail.com [this message]
2009-08-10 21:54 ` [U-Boot] [PATCH v5 1/3] arm: A320: driver for FTMAC100 ethernet controller Ben Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1249873200-22478-1-git-send-email-ratbert.chuang@gmail.com \
--to=ratbert.chuang@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.