All of lore.kernel.org
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: linuxppc-dev list <linuxppc-dev@ozlabs.org>
Subject: test branch update
Date: Thu, 13 Aug 2009 19:43:30 +1000	[thread overview]
Message-ID: <1250156610.24143.3.camel@pasglop> (raw)

I've pushed a few more things to my -test branch (in addition to some
-next updates that I may have forgotten to mention yesterday).

So here's the whole lot of stuff that's in there today vs. upstream.

Please give it a spin, it's really only compile tested here (and I
haven't scrubbed the warnings yet in case they show something bad), so
things will simmer there for a couple of days I think before I'm
confident enough to put them into -next.

Anton Blanchard (3):
      powerpc: Move 64bit VDSO to improve context switch performance
      powerpc: Rearrange SLB preload code
      powerpc: Preload application text segment instead of TASK_UNMAPPED_BASE

Anton Vorontsov (3):
      powerpc/83xx: Add support for MPC8377E-WLAN boards
      powerpc/85xx: Add support for I2C EEPROMs on MPC8548CDS boards
      powerpc/83xx: Add eSDHC support for MPC837xE-RDB/WLAN boards

Benjamin Herrenschmidt (29):
      powerpc: Rename exception.h to exception-64s.h
      powerpc: Use names rather than numbers for SPRGs (v2)
      powerpc: Remove use of a second scratch SPRG in STAB code
      powerpc/mm: Fix definitions of FORCE_MAX_ZONEORDER in Kconfig
      powerpc/pmac: Fix PowerSurge SMP IPI allocation
      powerpc: Change PACA from SPRG3 to SPRG1
      powerpc: Add compat_sys_truncate
      powerpc/mm: Fix misplaced #endif in pgtable-ppc64-64k.h
      powerpc/of: Remove useless register save/restore when calling OF back
      powerpc/mm: Add HW threads support to no_hash TLB management
      powerpc/mm: Add opcode definitions for tlbivax and tlbsrx.
      powerpc/mm: Add more bit definitions for Book3E MMU registers
      powerpc/mm: Add support for early ioremap on non-hash 64-bit processors
      powerpc: Modify some ppc_asm.h macros to accomodate 64-bits Book3E
      powerpc/mm: Make low level TLB flush ops on BookE take additional args
      powerpc/mm: Call mmu_context_init() from ppc64
      powerpc: Clean ifdef usage in copy_thread()
      powerpc: Move definitions of secondary CPU spinloop to header file
      powerpc/mm: Rework & cleanup page table freeing code path
      powerpc: Add SPR definitions for new 64-bit BookE
      powerpc: Add memory management headers for new 64-bit BookE
      powerpc: Add definitions used by exception handling on 64-bit Book3E
      powerpc: Add PACA fields specific to 64-bit Book3E processors
      powerpc/mm: Move around mmu_gathers definition on 64-bit
      powerpc: Add TLB management code for 64-bit Book3E
      powerpc/mm: Add support for SPARSEMEM_VMEMMAP on 64-bit Book3E
      powerpc: Remaining 64-bit Book3E support
      powerpc/mm: Fix encoding of page table cache numbers
      powerpc/mm: Cleanup handling of execute permission

Benjamin Krill (1):
      powerpc/prom_init: Evaluate mem kernel parameter for early allocation

Christoph Hellwig (2):
      powerpc/sputrace: Use the generic event tracer
      powerpc: Switch to asm-generic/hardirq.h

Frans Pop (1):
      powerpc: Makefile simplification through use of cc-ifversion

Geert Uytterhoeven (1):
      powerpc/cell: Move CBE_IOPTE_* to <asm/cell-regs.h>

Geoff Thorpe (1):
      powerpc: expose the multi-bit ops that underlie single-bit ops.

Gerhard Pircher (1):
      powerpc/amigaone: Convert amigaone_init() to a machine_device_initcall()

Heiko Schocher (1):
      powerpc/82xx: mgcoge - updates for 2.6.32

Julia Lawall (5):
      powerpc/fsl_rio: Add kmalloc NULL tests
      powerpc/ipic: introduce missing kfree
      powerpc/qe: introduce missing kfree
      hvc_console: Drop unnecessary NULL test
      powerpc: Use DIV_ROUND_CLOSEST in time init code

Kumar Gala (3):
      powerpc/mm: Fix switch_mmu_context to iterate of the proper list of cpus
      powerpc/85xx: Move mpc8536ds.dts to address-cells/size-cells = <2>
      powerpc/85xx: Added 36-bit physical device tree for mpc8572ds board

Lucian Adrian Grijincu (1):
      powerpc: Update boot wrapper script with the new location of dtc

Martyn Welch (4):
      powerpc/86xx: Correct reading of information presented in cpuinfo
      powerpc/86xx: Enable XMC site on GE Fanuc SBC310
      powerpc/86xx: Update GE Fanuc sbc310 DTS
      powerpc/nvram: Allow byte length reads from mmio NVRAM driver

Michael Ellerman (5):
      powerpc/mpic: Fix MPIC_BROKEN_REGREAD on non broken MPICs
      kmemleak: Allow kmemleak to be built on powerpc
      powerpc: Enable GCOV
      powerpc/vmlinux.lds: Move _edata down
      powerpc: Add kmemleak annotations to lmb.c

Michel Dänzer (2):
      agp/uninorth: Allow larger aperture sizes on pre-U3 bridges.
      agp/uninorth: Simplify cache flushing.

Roel Kluin (2):
      powerpc/fsl-booke: read buffer overflow
      powerpc/hvsi: Avoid calculating possibly-invalid address

Sebastian Andrzej Siewior (1):
      powerpc/ipic: unmask all interrupt sources

Stefan Roese (5):
      powerpc: Add AMCC 460EX/460GT Rev. B support to cputable.c
      powerpc/44x: Add NAND support to Canyonlands dts
      powerpc/40x: Update Kilauea dts to support NAND, RTC and HWMON
      powerpc/44x: Update Canyonlands defconfig to support NOR, NAND and RTC
      powerpc/40x: Update kilauea defconfig to support NAND, RTC and HWMON

Stephen Rothwell (1):
      powerpc: use consistent types in mktree

Stoyan Gaydarov (1):
      powerpc: ARRAY_SIZE changes in pasemi and powermac code

roel kluin (3):
      powerpc/cell: Replace strncpy by strlcpy
      powerpc: Missing tests for NULL after ioremap()
      powerpc/macio: Don't the address of an array element before boundchecking

             reply	other threads:[~2009-08-13  9:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-13  9:43 Benjamin Herrenschmidt [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-03-11  6:25 test branch update Benjamin Herrenschmidt
2009-03-11  8:43 ` Michael Neuling
2009-02-11  5:03 Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1250156610.24143.3.camel@pasglop \
    --to=benh@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.