Re: powerpc/405ex: Support cuImage for PPC405EX

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Tue, 2009-08-18 at 10:28 +0800, Tiejun Chen wrote:
> Summary: powerpc/405ex: Support cuImage for PPC405EX
> Reviewers: Benjmain and linux-ppc
> ----------------------------------------------------
> These patch series are used to support cuImage on the kilauea board based on PPC405ex.

Thanks !

I'll let Josh pick that up.

Cheers,
Ben.


> Tested on the amcc kilauea board:
> ===
> ...
> => tftp 1000000 cuImage.kilauea
> Waiting for PHY auto negotiation to complete.. done
> ENET Speed is 100 Mbps - FULL duplex connection (EMAC0)
> Using ppc_4xx_eth0 device
> TFTP from server 192.168.1.2; our IP address is 192.168.1.103
> Filename 'cuImage.kilauea'.
> Load address: 0x1000000
> Loading: #################################################################
>          #################################################################
>          #################################################################
>          #################################################################
>          #########################################
> done
> Bytes transferred = 1540945 (178351 hex)
> => bootm
> ## Booting kernel from Legacy Image at 01000000 ...
>    Image Name:   Linux-2.6.31-rc5-57857-g8df7f47-
>    Created:      2009-08-17   6:31:13 UTC
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    1540881 Bytes =  1.5 MB
>    Load Address: 00400000
>    Entry Point:  00400468
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
> CPU clock-frequency <- 0x23c345fa (600MHz)
> CPU timebase-frequency <- 0x23c345fa (600MHz)
> /plb: clock-frequency <- bebc1fe (200MHz)
> /plb/opb: clock-frequency <- 5f5e0ff (100MHz)
> /plb/opb/ebc: clock-frequency <- 5f5e0ff (100MHz)
> /plb/opb/serial@ef600200: clock-frequency <- a8c000 (11MHz)
> /plb/opb/serial@ef600300: clock-frequency <- a8c000 (11MHz)
> Memory <- <0x0 0x10000000> (256MB)
> ethernet0: local-mac-address <- 00:06:4b:10:22:6c
> ethernet1: local-mac-address <- 00:06:4b:10:22:6d
> 
> zImage starting: loaded at 0x00400000 (sp: 0x0fe9ec08)
> Allocating 0x330c70 bytes for kernel ...
> gunzipping (0x00000000 <- 0x0040f000:0x0073a03c)...done 0x31425c bytes
> 
> Linux/PowerPC load: root=/dev/nfs rw nfsroot=192.168.1.2:/home/vividfe/rootfsf
> Finalizing device tree... flat tree at 0x747300
> Using PowerPC 40x Platform machine description
> ...
> 
> Best Regards
> Tiejun
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>