From: Shuah Khan <shuah.khan@hp.com>
To: "openhpi-devel@lists.sourceforge.net"
<openhpi-devel@lists.sourceforge.net>
Cc: LTP list <ltp-list@lists.sourceforge.net>
Subject: Re: [LTP] [Openhpi-devel] [PATCH] Cross-compile configure bug
Date: Tue, 25 Aug 2009 11:42:15 -0600 [thread overview]
Message-ID: <1251222135.7108.16.camel@orthanc> (raw)
In-Reply-To: <op.uy74unolo8angs@localhost>
On Tue, 2009-08-25 at 15:19 +0000, Anton Pak wrote:
> I tried many times OpenHPI on x86_64.
> It worked fine in the configurations x86 client - x86_64 daemon and x86_64
> client - x86 daemon.
> However, the functioning on non-x86 64-bit platform or on Itanium is still
> an open question for me.
>
> Anton Pak
Instead of changing the error to a warning, itcould be controlled via a
config option, so this error could be ignored on certain architectures
using this config tune.
-- Shuah
>
> On Tue, 25 Aug 2009 19:12:03 +0400, Shuah Khan <shuah.khan@hp.com> wrote:
>
> > On Tue, 2009-08-25 at 05:42 +0000, anton.pak@pigeonpoint.com wrote:
> >> Hello!
> >>
> >> We have the following lines in include/SaHpi.h:
> >>
> >> typedef unsigned char SaHpiUint8T;
> >> typedef unsigned short SaHpiUint16T;
> >> typedef unsigned int SaHpiUint32T;
> >> typedef signed char SaHpiInt8T;
> >> typedef signed short SaHpiInt16T;
> >> typedef signed int SaHpiInt32T;
> >>
> >> Also I suspect there can be marshalling issues, i.e. when
> >> daemon on platform with sizeof(int) == 4 but library is not and vice
> >> versa.
> >>
> >> Anton Pak
> >
> > The proposed fix might help compile OpenHpi on a 64-bit platform,
> > however I agree with the concerns from others that we will see run-time
> > issues. Running 32-bit binary and libraries on a 64-bit platform might
> > be an option.
> >
> > -- Shuah
> >
> >
> >>
> >>
> >> > Hi Garrett,
> >> >
> >> > I was wondering about your addition of the cross_compiling test. If
> >> > there is OpenHPI code that may behave badly on a system where an int
> >> > isn't 4 bytes, I'm thinking that a warning should be issued even for a
> >> > cross compile to such an architecture as well. Like:
> >> >
> >> > if test "x$OH_SIZEOF_INT" != "x4"; then
> >> > AC_MSG_WARN([
> >> > *** int is not 4 bytes, it is $OH_SIZEOF_INT bytes on this platform
> >> > *** undefined behavior may result from this.
> >> > ])
> >> > fi
> >> >
> >> > Will having a warning instead of an error cause problems for LTP when
> >> > cross compiling?
> >> >
> >> > Does anyone else in the OpenHPI community oppose changing this error
> >> to
> >> > a warning?
> >> >
> >> > Best Regards,
> >> > Ric White
> >> >
> >> >
> >> > On Wed, 2009-08-19 at 23:11 +0000, Garrett Cooper wrote:
> >> >> Hi,
> >> >> Found this bug while trying to cross-compile with the
> >> >> openhpi-test-suite in LTP, and made the ERROR into WARN. Please fix
> >> >> this item as per the attached patch.
> >> >> Thanks,
> >> >> -Garrett
> >> >>
> >> >> PS Please CC my address in all correspondence w.r.t. this email
> >> thread.
> >> >>
> >> >> Summary:
> >> >>
> >> >> 1. int != 4 shouldn't be checked for while cross-compiling.
> >> >> 2. Warn instead of erroring out, because we have a _lot_ of 64-bit
> >> >> platforms that we test on which will be negatively impacted by this
> >> >> check.
> >> >>
> >> >> Signed-off-by: Garrett Cooper <yanegomi@gmail.com>
> >> >>
> >> >> ---
> >> >>
> >> /nfs.mac/ltp-upgrade/contrib/ltp/src/testcases/open_hpi_testsuite//configure.ac.orig 2009-08-19
> >> >> 16:04:08.000000000 -0700
> >> >> +++
> >> >>
> >> /nfs.mac/ltp-upgrade/contrib/ltp/src/testcases/open_hpi_testsuite//configure.ac 2009-08-19
> >> >> 16:10:47.000000000 -0700
> >> >> @@ -44,14 +44,13 @@
> >> >> AC_PROG_LN_S
> >> >> AC_PROG_MAKE_SET
> >> >>
> >> >> -dnl die on int != 32bits. This is too instrumental to our code
> >> right
> >> >> now.
> >> >> +dnl Warn when int != 32bits. This is too instrumental to our code
> >> >> right now.
> >> >> dnl AC_MSG_CHECKING(int is 4 bytes)
> >> >> OH_SET_SIZES
> >> >> -if test "x$OH_SIZEOF_INT" != "x4"; then
> >> >> - AC_MSG_ERROR([
> >> >> +if test x$cross_compiling != xyes && test "x$OH_SIZEOF_INT" != "x4";
> >> >> then
> >> >> + AC_MSG_WARN([
> >> >> *** int is not 4 bytes, it is $OH_SIZEOF_INT bytes on this platform
> >> >> -*** undefined behavior will result
> >> >> -*** please contact the openhpi development team to fix this
> >> >> +*** undefined behavior may result from this.
> >> >> ])
> >> >> fi
> >> >>
> >> >>
> >> ------------------------------------------------------------------------------
> >> >> Let Crystal Reports handle the reporting - Free Crystal Reports 2008
> >> >> 30-Day
> >> >> trial. Simplify your report design, integration and deployment - and
> >> >> focus on
> >> >> what you do best, core application coding. Discover what's new with
> >> >> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> >> >> _______________________________________________
> >> >> Openhpi-devel mailing list
> >> >> Openhpi-devel@lists.sourceforge.net
> >> >> https://lists.sourceforge.net/lists/listinfo/openhpi-devel
> >> >
> >> >
> >> >
> >> ------------------------------------------------------------------------------
> >> > Let Crystal Reports handle the reporting - Free Crystal Reports 2008
> >> > 30-Day
> >> > trial. Simplify your report design, integration and deployment - and
> >> focus
> >> > on
> >> > what you do best, core application coding. Discover what's new with
> >> > Crystal Reports now. http://p.sf.net/sfu/bobj-july
> >> > _______________________________________________
> >> > Openhpi-devel mailing list
> >> > Openhpi-devel@lists.sourceforge.net
> >> > https://lists.sourceforge.net/lists/listinfo/openhpi-devel
> >> >
> >>
> >>
> >>
> >> ------------------------------------------------------------------------------
> >> Let Crystal Reports handle the reporting - Free Crystal Reports 2008
> >> 30-Day
> >> trial. Simplify your report design, integration and deployment - and
> >> focus on
> >> what you do best, core application coding. Discover what's new with
> >> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> >> _______________________________________________
> >> Openhpi-devel mailing list
> >> Openhpi-devel@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/openhpi-devel
>
>
>
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
> trial. Simplify your report design, integration and deployment - and focus on
> what you do best, core application coding. Discover what's new with
> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Openhpi-devel mailing list
> Openhpi-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openhpi-devel
--
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
next prev parent reply other threads:[~2009-08-25 17:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-19 23:11 [LTP] [PATCH] Cross-compile configure bug Garrett Cooper
2009-08-23 7:28 ` Subrata Modak
2009-08-25 1:15 ` [LTP] [Openhpi-devel] " Ric White
2009-08-25 5:42 ` anton.pak
2009-08-25 15:12 ` Shuah Khan
2009-08-25 15:19 ` Anton Pak
2009-08-25 17:42 ` Shuah Khan [this message]
2009-08-26 0:16 ` Garrett Cooper
2009-08-27 0:51 ` Ric White
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1251222135.7108.16.camel@orthanc \
--to=shuah.khan@hp.com \
--cc=ltp-list@lists.sourceforge.net \
--cc=openhpi-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.