All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andy@greyhouse.net
Subject: [PATCH 08/12] tg3: Convert code to use PHY_IS_FET
Date: Tue, 25 Aug 2009 13:10:03 -0700	[thread overview]
Message-ID: <1251232429.25413@xw6200> (raw)

This patch converts the code to use the PHY_IS_FET flag rather than the
ASIC revision to decide whether or not to use FET paths.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
---
 drivers/net/tg3.c |   73 +++++++++++++++++++++++++++++++++-------------------
 drivers/net/tg3.h |    1 +
 2 files changed, 47 insertions(+), 27 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 800f980..2808152 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -784,7 +784,7 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
 	unsigned int loops;
 	int ret;
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
+	if ((tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) &&
 	    (reg == MII_TG3_CTRL || reg == MII_TG3_AUX_CTRL))
 		return 0;
 
@@ -1069,6 +1069,7 @@ static int tg3_mdio_init(struct tg3 *tp)
 	case TG3_PHY_ID_RTL8201E:
 	case TG3_PHY_ID_BCMAC131:
 		phydev->interface = PHY_INTERFACE_MODE_MII;
+		tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
 		break;
 	}
 
@@ -1474,13 +1475,37 @@ static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
 	tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
 }
 
+static void tg3_phy_fet_toggle_apd(struct tg3 *tp, bool enable)
+{
+	u32 phytest;
+
+	if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
+		u32 phy;
+
+		tg3_writephy(tp, MII_TG3_FET_TEST,
+			     phytest | MII_TG3_FET_SHADOW_EN);
+		if (!tg3_readphy(tp, MII_TG3_FET_SHDW_AUXSTAT2, &phy)) {
+			if (enable)
+				phy |= MII_TG3_FET_SHDW_AUXSTAT2_APD;
+			else
+				phy &= ~MII_TG3_FET_SHDW_AUXSTAT2_APD;
+			tg3_writephy(tp, MII_TG3_FET_SHDW_AUXSTAT2, phy);
+		}
+		tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
+	}
+}
+
 static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable)
 {
 	u32 reg;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+		return;
+
+	if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+		tg3_phy_fet_toggle_apd(tp, enable);
 		return;
+	}
 
 	reg = MII_TG3_MISC_SHDW_WREN |
 	      MII_TG3_MISC_SHDW_SCR5_SEL |
@@ -1511,7 +1536,7 @@ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
 	    (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
 		return;
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+	if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
 		u32 ephy;
 
 		if (!tg3_readphy(tp, MII_TG3_FET_TEST, &ephy)) {
@@ -2662,7 +2687,7 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
 		break;
 
 	default:
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+		if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
 			*speed = (val & MII_TG3_AUX_STAT_100) ? SPEED_100 :
 				 SPEED_10;
 			*duplex = (val & MII_TG3_AUX_STAT_FULL) ? DUPLEX_FULL :
@@ -2997,7 +3022,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 
 	if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT)
 		tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG);
-	else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
+	else if (!(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET))
 		tg3_writephy(tp, MII_TG3_IMASK, ~0);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -3107,7 +3132,9 @@ relink:
 			tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
 		else
 			tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
-	} else
+	} else if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET)
+		tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
+	else
 		tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
 
 	tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
@@ -7349,7 +7376,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			return err;
 
 		if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
-		    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
+		    !(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET)) {
 			u32 tmp;
 
 			/* Clear CRC stats. */
@@ -9746,20 +9773,8 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 	} else if (loopback_mode == TG3_PHY_LOOPBACK) {
 		u32 val;
 
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-			u32 phytest;
-
-			if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
-				u32 phy, reg = MII_TG3_FET_SHDW_AUXSTAT2;
-
-				tg3_writephy(tp, MII_TG3_FET_TEST,
-					     phytest | MII_TG3_FET_SHADOW_EN);
-				if (!tg3_readphy(tp, reg, &phy)) {
-					phy &= ~MII_TG3_FET_SHDW_AUXSTAT2_APD;
-					tg3_writephy(tp, reg, phy);
-				}
-				tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
-			}
+		if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+			tg3_phy_fet_toggle_apd(tp, false);
 			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
 		} else
 			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
@@ -9770,8 +9785,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 		udelay(40);
 
 		mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-			tg3_writephy(tp, MII_TG3_FET_PTEST, 0x1800);
+		if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+				tg3_writephy(tp, MII_TG3_FET_PTEST, 0x1800);
 			mac_mode |= MAC_MODE_PORT_MODE_MII;
 		} else
 			mac_mode |= MAC_MODE_PORT_MODE_GMII;
@@ -12268,12 +12284,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		tp->tg3_flags |= TG3_FLAG_WOL_SPEED_100MB;
 	}
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+		tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
+
 	/* A few boards don't want Ethernet@WireSpeed phy feature */
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
 	    ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
 	     (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
 	     (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) ||
+	    (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) ||
 	    (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
 		tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
 
@@ -12284,7 +12303,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
 
 	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906 &&
+	    !(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
@@ -12409,7 +12428,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	      tp->pdev->device == PCI_DEVICE_ID_TIGON3_5753F ||
 	      tp->pdev->device == PCI_DEVICE_ID_TIGON3_5787F)) ||
 	    tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+	    (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET))
 		tp->tg3_flags |= TG3_FLAG_10_100_ONLY;
 
 	err = tg3_phy_probe(tp);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index b8339c9..60b12ab 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2666,6 +2666,7 @@ struct tg3 {
 #define TG3_FLG3_5755_PLUS		0x00002000
 #define TG3_FLG3_NO_NVRAM		0x00004000
 #define TG3_FLG3_TOGGLE_10_100_L1PLLPD	0x00008000
+#define TG3_FLG3_PHY_IS_FET		0x00010000
 
 	struct timer_list		timer;
 	u16				timer_counter;
-- 
1.6.3.3



                 reply	other threads:[~2009-08-25 20:34 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1251232429.25413@xw6200 \
    --to=mcarlson@broadcom.com \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.