[PATCH] powerpc/pci: Pull ppc32 PCI features into common

[Kumar Gala <galak@kernel.crashing.org>]

Some of the PCI features we have in ppc32 we will need on ppc64
platforms in the future.  These include support for:

* ppc_md.pci_exclude_device
* indirect config cycles
* early config cycles

We also simplified the logic in fake_pci_bus() to assume it will always
get a valid pci_controller.  Since all current callers seem to pass it
one.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/machdep.h    |    6 +-
 arch/powerpc/include/asm/pci-bridge.h |   35 +++++++---------
 arch/powerpc/kernel/pci-common.c      |   70 ++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/pci_32.c          |   71 ---------------------------------
 4 files changed, 89 insertions(+), 93 deletions(-)

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 11d1fc3..9efa2be 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -209,14 +209,14 @@ struct machdep_calls {
 	/*
 	 * optional PCI "hooks"
 	 */
-	/* Called in indirect_* to avoid touching devices */
-	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
 	/* Called at then very end of pcibios_init() */
 	void (*pcibios_after_init)(void);
 
 #endif /* CONFIG_PPC32 */
 
+	/* Called in indirect_* to avoid touching devices */
+	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
 	/* Called after PPC generic resource fixup to perform
 	   machine specific fixups */
 	void (*pcibios_fixup_resources)(struct pci_dev *);
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 4c61fa0..e074420 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -77,9 +77,7 @@ struct pci_controller {
 
 	int first_busno;
 	int last_busno;
-#ifndef CONFIG_PPC64
 	int self_busno;
-#endif
 
 	void __iomem *io_base_virt;
 #ifdef CONFIG_PPC64
@@ -104,7 +102,6 @@ struct pci_controller {
 	unsigned int __iomem *cfg_addr;
 	void __iomem *cfg_data;
 
-#ifndef CONFIG_PPC64
 	/*
 	 * Used for variants of PCI indirect handling and possible quirks:
 	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
@@ -128,7 +125,6 @@ struct pci_controller {
 #define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
 #define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
 	u32 indirect_type;
-#endif	/* !CONFIG_PPC64 */
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
 	 * ranges since the common pci_bus structure can't handle more
 	 */
@@ -146,21 +142,6 @@ struct pci_controller {
 #endif	/* CONFIG_PPC64 */
 };
 
-#ifndef CONFIG_PPC64
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-	/* No specific ISA handling on ppc32 at this stage, it
-	 * all goes through PCI
-	 */
-	return 0;
-}
-
 /* These are used for config access before all the PCI probing
    has been done. */
 extern int early_read_config_byte(struct pci_controller *hose, int bus,
@@ -182,6 +163,22 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
 extern void setup_indirect_pci(struct pci_controller* hose,
 			       resource_size_t cfg_addr,
 			       resource_size_t cfg_data, u32 flags);
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
 #else	/* CONFIG_PPC64 */
 
 /*
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 5a56e97..6357f2b 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1626,3 +1626,73 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
 
 }
 
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;    				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+	.read = null_read_config,
+	.write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (hose == 0) {
+		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+	}
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose? hose->ops: &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+			  int cap)
+{
+	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 3ae1c66..ebe9ef9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -478,75 +478,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
 	return result;
 }
 
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)					\
-static int								\
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
-{									\
-	return PCIBIOS_DEVICE_NOT_FOUND;    				\
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
-	.read = null_read_config,
-	.write = null_write_config,
-};
 
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-	static struct pci_bus bus;
-
-	if (hose == 0) {
-		hose = pci_bus_to_hose(busnr);
-		if (hose == 0)
-			printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
-	}
-	bus.number = busnr;
-	bus.sysdata = hose;
-	bus.ops = hose? hose->ops: &null_pci_ops;
-	return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
-			       int devfn, int offset, type value)	\
-{									\
-	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
-					    devfn, offset, value);	\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
-			  int cap)
-{
-	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}
-- 
1.6.0.6