All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Zhao <linuxzsc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Richard Zhao <linuxzsc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH] i2c: imx: disable clock when it's possible to save power.
Date: Wed, 30 Sep 2009 13:48:02 +0800	[thread overview]
Message-ID: <1254289682-29056-4-git-send-email-linuxzsc@gmail.com> (raw)
In-Reply-To: <1254289682-29056-3-git-send-email-linuxzsc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Enable clock before START, disable it after STOP.

Signed-off-by: Richard Zhao <linuxzsc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/i2c/busses/i2c-imx.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 87faea4..72ddea3 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -120,6 +120,7 @@ struct imx_i2c_struct {
 	wait_queue_head_t	queue;
 	unsigned long		i2csr;
 	unsigned int 		disable_delay;
+	unsigned int		ifdr; /* IMX_I2C_IFDR */
 };
 
 /** Functions for IMX I2C adapter driver ***************************************
@@ -210,6 +211,8 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
+	clk_enable(i2c_imx->clk);
+	writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
 	/* Enable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
 	writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
@@ -254,6 +257,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 
 	/* Disable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+	clk_disable(i2c_imx->clk);
 }
 
 static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
@@ -273,8 +277,8 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
 	else
 		for (i = 0; i2c_clk_div[i][0] < div; i++);
 
-	/* Write divider value to register */
-	writeb(i2c_clk_div[i][1], i2c_imx->base + IMX_I2C_IFDR);
+	/* Store divider value */
+	i2c_imx->ifdr = i2c_clk_div[i][1];
 
 	if (cpu_is_mx1()) {
 		/*
@@ -555,7 +559,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "can't get I2C clock\n");
 		goto fail3;
 	}
-	clk_enable(i2c_imx->clk);
 
 	/* Request IRQ */
 	ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx);
@@ -604,7 +607,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 fail5:
 	free_irq(i2c_imx->irq, i2c_imx);
 fail4:
-	clk_disable(i2c_imx->clk);
 	clk_put(i2c_imx->clk);
 fail3:
 	release_mem_region(i2c_imx->res->start, resource_size(res));
@@ -641,8 +643,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
 	if (pdata && pdata->exit)
 		pdata->exit(&pdev->dev);
 
-	/* Disable I2C clock */
-	clk_disable(i2c_imx->clk);
 	clk_put(i2c_imx->clk);
 
 	release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
-- 
1.6.0.4

  parent reply	other threads:[~2009-09-30  5:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-30  5:47 [PATCH] i2c: imx: check busy bit when START/STOP Richard Zhao
     [not found] ` <1254289682-29056-1-git-send-email-linuxzsc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2009-09-30  5:48   ` [PATCH] i2c: imx: only imx1 needs disable delay Richard Zhao
     [not found]     ` <1254289682-29056-2-git-send-email-linuxzsc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2009-09-30  5:48       ` [PATCH] i2c: imx: add macros and printk to make debug easy Richard Zhao
     [not found]         ` <1254289682-29056-3-git-send-email-linuxzsc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2009-09-30  5:48           ` Richard Zhao [this message]
2009-09-30  5:49           ` Richard Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1254289682-29056-4-git-send-email-linuxzsc@gmail.com \
    --to=linuxzsc-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.