Re: [PATCH 4/6] 8xx: Tag DAR with 0x00f0 to catch buggy instructions.

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Wed, 2009-10-07 at 22:46 +0200, Joakim Tjernlund wrote:
> dcbz, dcbf, dcbi, dcbst and icbi do not set DAR when they
> cause a DTLB Error. Dectect this by tagging DAR with 0x00f0
> at every exception exit that modifies DAR.
> Test for DAR=0x00f0 in DataTLBError and bail
> to handle_page_fault().

Why not -1 ? :-)

Ben.

> ---
>  arch/powerpc/kernel/head_8xx.S |   19 ++++++++++++++++---
>  1 files changed, 16 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index 3cf1289..37aa7d0 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -206,6 +206,8 @@ MachineCheck:
>  	EXCEPTION_PROLOG
>  	mfspr r4,SPRN_DAR
>  	stw r4,_DAR(r11)
> +	li r5,0x00f0
> +	mtspr SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
>  	mfspr r5,SPRN_DSISR
>  	stw r5,_DSISR(r11)
>  	addi r3,r1,STACK_FRAME_OVERHEAD
> @@ -222,6 +224,8 @@ DataAccess:
>  	stw	r10,_DSISR(r11)
>  	mr	r5,r10
>  	mfspr	r4,SPRN_DAR
> +	li	r10,0x00f0
> +	mtspr	SPRN_DAR,r10	/* Tag DAR, to be used in DTLB Error */
>  	EXC_XFER_EE_LITE(0x300, handle_page_fault)
>  
>  /* Instruction access exception.
> @@ -244,6 +248,8 @@ Alignment:
>  	EXCEPTION_PROLOG
>  	mfspr	r4,SPRN_DAR
>  	stw	r4,_DAR(r11)
> +	li	r5,0x00f0
> +	mtspr	SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
>  	mfspr	r5,SPRN_DSISR
>  	stw	r5,_DSISR(r11)
>  	addi	r3,r1,STACK_FRAME_OVERHEAD
> @@ -427,6 +433,7 @@ DataStoreTLBMiss:
>  	 * of the MMU.
>  	 */
>  2:	li	r11, 0x00f0
> +	mtspr	SPRN_DAR,r11	/* Tag DAR */
>  	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
>  	DO_8xx_CPU6(0x3d80, r3)
>  	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
> @@ -467,10 +474,14 @@ DataTLBError:
>  	stw	r10, 0(r0)
>  	stw	r11, 4(r0)
>  
> +	mfspr	r10, SPRN_DAR
> +	cmpwi	cr0, r10, 0x00f0
> +	beq-	2f	/* must be a buggy dcbX, icbi insn. */
> +
>  	/* First, make sure this was a store operation.
>  	*/
> -	mfspr	r10, SPRN_DSISR
> -	andis.	r11, r10, 0x4000 /* no translation */
> +	mfspr	r11, SPRN_DSISR
> +	andis.	r11, r11, 0x4000 /* no translation */
>  	bne	2f	/* branch if set */
>  
>  	/* The EA of a data TLB miss is automatically stored in the MD_EPN
> @@ -489,7 +500,8 @@ DataTLBError:
>  	 * are initialized in mapin_ram().  This will avoid the problem,
>  	 * assuming we only use the dcbi instruction on kernel addresses.
>  	 */
> -	mfspr	r10, SPRN_DAR
> +
> +	/* DAR is in r10 already */
>  	rlwinm	r11, r10, 0, 0, 19
>  	ori	r11, r11, MD_EVALID
>  	mfspr	r10, SPRN_M_CASID
> @@ -539,6 +551,7 @@ DataTLBError:
>  	 * of the MMU.
>  	 */
>  	li	r11, 0x00f0
> +	mtspr	SPRN_DAR,r11	/* Tag DAR */
>  	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
>  	DO_8xx_CPU6(0x3d80, r3)
>  	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */