From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Murphy Date: Thu, 08 Oct 2009 13:36:23 +0100 Subject: [ath9k-devel] Setting master mode Message-ID: <1255005383.4133.266.camel@scottfagans> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi, I am new to this list so apologies in advance for asking a question that may have been answered before. I am trying to setup a Jaunty box as an AP with a card in master mode. I downloaded kernel 2.6.31, enabled mac80211 then rebuilt and installed the new kernel. I have tried two different PCI cards, one based in the Realteck chipset RTL-8185 and the other based on the Atheros AR5007G. The problem is that I cannot set either card to Master mode. I have am using compat-wireless-2.6.31-rc7 and kernel 2.6.31-2.6.31. Any help, suggestions or valium would be most welcome right now. John -- John Murphy Technical And Managing Director MANDAC Ltd Kandoy House 2 Fairview Strand Dublin 3 p: +353 1 5143001 m: +353 85 711 6844 e: john.murphy at mandac.ie w: www.mandac.ie Company Number:445600 VAT Number: IE9687362A *********************************** This email contains information which may be confidential or privileged. The information is intended solely for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic transmission in error, please notify the sender by telephone or by electronic mail immediately. Any opinions expressed are those of the author, not Mandac Ltd. You are requested to carry out your own virus check before opening any attachment as Mandac Ltd accepts no liability for any loss or damage which may be caused by malicious software or attachments.