From: Dave Mitchell <dmitchell@appliedmicro.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Dave Mitchell <dmitchell@appliedmicro.com>
Subject: [PATCH][v2] powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms
Date: Thu, 8 Oct 2009 11:33:29 -0500 [thread overview]
Message-ID: <1255019609-2033-1-git-send-email-dmitchell@appliedmicro.com> (raw)
Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS
files where appropriate.
Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com>
Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com>
Acked-by: Victor Gallardo <vgallardo@appliedmicro.com>
Acked-by: Loc Ho <lho@appliedmicro.com>
---
v1->v2: local date/time was out-of-sync and thus mail was as well
arch/powerpc/boot/dts/canyonlands.dts | 2 ++
arch/powerpc/boot/dts/eiger.dts | 6 ++++++
arch/powerpc/boot/dts/glacier.dts | 6 ++++++
arch/powerpc/boot/dts/haleakala.dts | 2 ++
arch/powerpc/boot/dts/kilauea.dts | 4 ++++
arch/powerpc/boot/dts/makalu.dts | 4 ++++
arch/powerpc/boot/dts/redwood.dts | 1 +
7 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index c920170..cd56bb5 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -352,6 +352,7 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
@@ -381,6 +382,7 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts
index c4a934f..48bcf71 100644
--- a/arch/powerpc/boot/dts/eiger.dts
+++ b/arch/powerpc/boot/dts/eiger.dts
@@ -316,6 +316,7 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
@@ -345,6 +346,7 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
@@ -375,6 +377,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
@@ -403,6 +407,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index f3787a2..f6f6189 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -292,6 +292,7 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
@@ -321,6 +322,7 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
@@ -351,6 +353,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
@@ -379,6 +383,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index 5b2a494..2b25669 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -226,6 +226,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index c465614..083e68e 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -272,6 +272,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
@@ -300,6 +302,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index ffc246e..63d48b6 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -227,6 +227,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x0000003f>; /* Start at 6 */
rgmii-device = <&RGMII0>;
@@ -255,6 +257,8 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index ad402c4..d2af32e 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -226,6 +226,7 @@
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
--
1.6.3.2
next reply other threads:[~2009-10-08 16:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-08 16:33 Dave Mitchell [this message]
2009-10-09 2:15 ` [PATCH][v2] powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms Benjamin Herrenschmidt
2009-10-09 11:50 ` Josh Boyer
2009-10-09 21:22 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1255019609-2033-1-git-send-email-dmitchell@appliedmicro.com \
--to=dmitchell@appliedmicro.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.