From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Murphy Date: Mon, 12 Oct 2009 18:14:05 +0100 Subject: [ath9k-devel] Setting master mode In-Reply-To: <527481.57531.qm@web111909.mail.gq1.yahoo.com> References: <1255005383.4133.266.camel@scottfagans> <527481.57531.qm@web111909.mail.gq1.yahoo.com> Message-ID: <1255367645.4209.3.camel@scottfagans> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi Frito, Rodolphe and Will, Many thanks indeed for your help, it was a great help to me. As soon as I have it up and running fully I will post the details and then distill it into a howto for the Ubuntu list also. Thanks again. It's a great list with great contributors. John On Mon, 2009-10-12 at 08:54 -0700, Frito Lay wrote: > Hi John, > > I'm no expert, but since you didn't get any replies (except for that > troll), I'll add my two cents. > > You didn't mention how you are trying to set the cards to master mode, > I assume you are using iwconfig, if so, try with hostapd. Apparently > hostapd and iwconfig use different kernel methods for this. (I'm not > completely sure about this, corrections are accepted). > > You might also want to check the module options for whatever module > you are using with your wireless cards, some modules set the master > mode based on parameters. Just run: modinfo and see if > there is anything relevant. > > I don't know what is jaunty or compat-wireless-xxx, there are so many > distros, releases, and package names that you can't expect everyone to > know that (except when discussing in the distro's mailing list). > > Best regards, > > Frito > > > > > ______________________________________________________________________ > From: John Murphy > To: ath9k-devel at lists.ath9k.org > Sent: Thu, October 8, 2009 9:36:23 PM > Subject: [ath9k-devel] Setting master mode > > Hi, > > I am new to this list so apologies in advance for asking a question > that > may have been answered before. > > I am trying to setup a Jaunty box as an AP with a card in master mode. > I > downloaded kernel 2.6.31, enabled mac80211 then rebuilt and installed > the new kernel. I have tried two different PCI cards, one based in the > Realteck chipset RTL-8185 and the other based on the Atheros AR5007G. > The problem is that I cannot set either card to Master mode. I have am > using compat-wireless-2.6.31-rc7 and kernel 2.6.31-2.6.31. Any help, > suggestions or valium would be most welcome right now. > > John > > -- > John Murphy > Technical And Managing Director > MANDAC Ltd > Kandoy House > 2 Fairview Strand > Dublin 3 > p: +353 1 5143001 > m: +353 85 711 6844 > e: john.murphy at mandac.ie > w: www.mandac.ie > > Company Number:445600 > VAT Number: IE9687362A > *********************************** > This email contains information which may be confidential or > privileged. The information is intended solely for the use of the > individual or entity named above. If you are not the intended > recipient, be aware that any disclosure, copying, distribution > or use of the contents of this information is prohibited. If you > have received this electronic transmission in error, please notify > the sender by telephone or by electronic mail immediately. Any > opinions > expressed are those of the author, not Mandac Ltd. You are requested > to carry out your own virus check before opening any attachment as > Mandac Ltd accepts no liability for any loss or damage which may be > caused by malicious software or attachments. > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel -- John Murphy Technical And Managing Director MANDAC Ltd Kandoy House 2 Fairview Strand Dublin 3 p: +353 1 5143001 m: +353 85 711 6844 e: john.murphy at mandac.ie w: www.mandac.ie Company Number:445600 VAT Number: IE9687362A *********************************** This email contains information which may be confidential or privileged. The information is intended solely for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic transmission in error, please notify the sender by telephone or by electronic mail immediately. Any opinions expressed are those of the author, not Mandac Ltd. You are requested to carry out your own virus check before opening any attachment as Mandac Ltd accepts no liability for any loss or damage which may be caused by malicious software or attachments.