From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Subject: [Qemu-devel] [PATCH] Remove aio_ctx from paio_* interface
Date: Mon, 26 Oct 2009 13:03:08 +0100 [thread overview]
Message-ID: <1256558588-10107-1-git-send-email-kwolf@redhat.com> (raw)
The context parameter in paio_submit isn't used anyway, so there is no reason
why block drivers should need to remember it. This also avoids passing a Linux
AIO context to paio_submit (which doesn't do any harm as long as the parameter
is unused, but it is highly confusing).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
To be applied on top of the bdrv_read/write emulation fix.
block/raw-posix-aio.h | 4 ++--
block/raw-posix.c | 10 ++++------
posix-aio-compat.c | 11 +++++------
3 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/block/raw-posix-aio.h b/block/raw-posix-aio.h
index a2d4348..dfc63b8 100644
--- a/block/raw-posix-aio.h
+++ b/block/raw-posix-aio.h
@@ -26,8 +26,8 @@
/* posix-aio-compat.c - thread pool based implementation */
-void *paio_init(void);
-BlockDriverAIOCB *paio_submit(BlockDriverState *bs, void *aio_ctx, int fd,
+int paio_init(void);
+BlockDriverAIOCB *paio_submit(BlockDriverState *bs, int fd,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque, int type);
BlockDriverAIOCB *paio_ioctl(BlockDriverState *bs, int fd,
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 20b37a7..f396247 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -107,7 +107,6 @@ typedef struct BDRVRawState {
int type;
unsigned int lseek_err_cnt;
int open_flags;
- void *aio_ctx;
#if defined(__linux__)
/* linux floppy specific */
int64_t fd_open_time;
@@ -117,6 +116,7 @@ typedef struct BDRVRawState {
#endif
#ifdef CONFIG_LINUX_AIO
int use_aio;
+ void *aio_ctx;
#endif
uint8_t* aligned_buf;
} BDRVRawState;
@@ -181,8 +181,7 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
} else
#endif
{
- s->aio_ctx = paio_init();
- if (!s->aio_ctx) {
+ if (paio_init() < 0) {
goto out_free_buf;
}
#ifdef CONFIG_LINUX_AIO
@@ -554,7 +553,7 @@ static BlockDriverAIOCB *raw_aio_submit(BlockDriverState *bs,
}
}
- return paio_submit(bs, s->aio_ctx, s->fd, sector_num, qiov, nb_sectors,
+ return paio_submit(bs, s->fd, sector_num, qiov, nb_sectors,
cb, opaque, type);
}
@@ -582,8 +581,7 @@ static BlockDriverAIOCB *raw_aio_flush(BlockDriverState *bs,
if (fd_open(bs) < 0)
return NULL;
- return paio_submit(bs, s->aio_ctx, s->fd, 0, NULL, 0,
- cb, opaque, QEMU_AIO_FLUSH);
+ return paio_submit(bs, s->fd, 0, NULL, 0, cb, opaque, QEMU_AIO_FLUSH);
}
static void raw_close(BlockDriverState *bs)
diff --git a/posix-aio-compat.c b/posix-aio-compat.c
index ec58288..7f391c9 100644
--- a/posix-aio-compat.c
+++ b/posix-aio-compat.c
@@ -556,7 +556,7 @@ static AIOPool raw_aio_pool = {
.cancel = paio_cancel,
};
-BlockDriverAIOCB *paio_submit(BlockDriverState *bs, void *aio_ctx, int fd,
+BlockDriverAIOCB *paio_submit(BlockDriverState *bs, int fd,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque, int type)
{
@@ -607,7 +607,7 @@ BlockDriverAIOCB *paio_ioctl(BlockDriverState *bs, int fd,
return &acb->common;
}
-void *paio_init(void)
+int paio_init(void)
{
struct sigaction act;
PosixAioState *s;
@@ -615,7 +615,7 @@ void *paio_init(void)
int ret;
if (posix_aio_state)
- return posix_aio_state;
+ return 0;
s = qemu_malloc(sizeof(PosixAioState));
@@ -627,7 +627,7 @@ void *paio_init(void)
s->first_aio = NULL;
if (pipe(fds) == -1) {
fprintf(stderr, "failed to create pipe\n");
- return NULL;
+ return -1;
}
s->rfd = fds[0];
@@ -650,6 +650,5 @@ void *paio_init(void)
QTAILQ_INIT(&request_list);
posix_aio_state = s;
-
- return posix_aio_state;
+ return 0;
}
--
1.6.2.5
next reply other threads:[~2009-10-26 12:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-26 12:03 Kevin Wolf [this message]
2009-10-28 8:38 ` [Qemu-devel] [PATCH] Remove aio_ctx from paio_* interface Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1256558588-10107-1-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.