From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andy@greyhouse.net
Subject: [PATCH 07/20] tg3: Improve 5785 PCIe performance
Date: Mon, 2 Nov 2009 16:26:03 -0800 [thread overview]
Message-ID: <1257211996.22001@xw6200> (raw)
This patch improves 5785 performance by allowing the write DMA engine to
request larger DMA burst sizes than it otherwise would.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 3 +++
drivers/net/tg3.h | 3 ++-
2 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 54dbe98..a43ef2b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7633,6 +7633,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
val |= WDMAC_MODE_STATUS_TAG_FIX;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+ val |= WDMAC_MODE_BURST_ALL_DATA;
+
tw32_f(WDMAC_MODE, val);
udelay(40);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 530c36b..68431da 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1264,8 +1264,9 @@
#define WDMAC_MODE_FIFOURUN_ENAB 0x00000080
#define WDMAC_MODE_FIFOOREAD_ENAB 0x00000100
#define WDMAC_MODE_LNGREAD_ENAB 0x00000200
-#define WDMAC_MODE_RX_ACCEL 0x00000400
+#define WDMAC_MODE_RX_ACCEL 0x00000400
#define WDMAC_MODE_STATUS_TAG_FIX 0x20000000
+#define WDMAC_MODE_BURST_ALL_DATA 0xc0000000
#define WDMAC_STATUS 0x00004c04
#define WDMAC_STATUS_TGTABORT 0x00000004
#define WDMAC_STATUS_MSTABORT 0x00000008
--
1.6.4.4
reply other threads:[~2009-11-03 1:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1257211996.22001@xw6200 \
--to=mcarlson@broadcom.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.