From: Ben Hutchings <ben@decadent.org.uk>
To: netdev@vger.kernel.org
Cc: Michel Messerschmidt <lists@michel-messerschmidt.de>,
556587@bugs.debian.org
Subject: nf_conntrack sets wrong value for ctorigsrc parameter
Date: Wed, 18 Nov 2009 07:39:18 +0000 [thread overview]
Message-ID: <1258529958.2810.36.camel@localhost> (raw)
[-- Attachment #1: Type: text/plain, Size: 28101 bytes --]
From the Debian bug tracking system:
-------- Forwarded Message --------
From: Michel Messerschmidt <lists@michel-messerschmidt.de>
Reply-to: Michel Messerschmidt <lists@michel-messerschmidt.de>, 556587@bugs.debian.org
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: Bug#556587: linux-image-2.6.31-1-686-bigmem: nf_conntrack sets wrong value for ctorigsrc parameter
Date: Mon, 16 Nov 2009 23:09:10 +0100
Package: linux-2.6
Version: 2.6.31-2
Severity: normal
My iptables script using the conntrack module does not work with this kernel
version anymore. The value of the ctorigsrc parameter is not set correctly:
rei:~$ cat /etc/mm_iptables/mm_iptables_dmz | grep -E 'ctorig|LOCALIP='
LOCALIP="192.168.40.3"
$IPT -A in_dmz -p udp --dport 1024:65535 -m conntrack --ctproto udp --ctorigsrc $LOCALIP --ctorigdstport 53 --ctreplsrcport 53 -j ACCEPT
$IPT -A in_dmz -p udp --dport 1024:65535 -m conntrack --ctstate RELATED,ESTABLISHED --ctproto udp --ctorigsrc $LOCALIP -j ACCEPT
rei:~$ iptables -nvL | grep ctorig
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctproto 17 ctorigsrc 192.60.154.245 ctorigdstport 53 ctreplsrcport 53
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctstate RELATED,ESTABLISHED ctproto 17 ctorigsrc 128.49.154.245
I see the same behavior with the 686 flavour (without bigmem).
With older kernels up to 2.6.30-8, the ctorigsrc value was set as expected:
rei:~$ iptables -nvL | grep ctorig
21 2452 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctproto 17 ctorigsrc 192.168.40.3 ctorigdstport 53 ctreplsrcport 53
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctstate RELATED,ESTABLISHED ctproto 17 ctorigsrc 192.168.40.3
-- Package-specific info:
** Version:
Linux version 2.6.31-1-686-bigmem (Debian 2.6.31-2) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Nov 15 21:22:56 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.31-1-686-bigmem root=/dev/mapper/sda2_crypt ro vdso=1
** Not tainted
** Kernel log:
[ 252.421890] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.150.205 DST=192.168.40.3 LEN=126 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=25586 LEN=106
[ 252.425260] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.149.142 DST=192.168.40.3 LEN=126 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=25586 LEN=106
[ 252.425929] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.150.205 DST=192.168.40.3 LEN=144 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=42698 LEN=124
[ 252.429781] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.149.142 DST=192.168.40.3 LEN=144 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=42698 LEN=124
[...cut many repeated log messages...]
** Model information
not available
** Loaded modules:
Module Size Used by
tun 13120 2
video 19856 0
output 2872 1 video
ac 3124 0
battery 6348 0
acpi_cpufreq 8104 0
cpufreq_userspace 2944 0
cpufreq_conservative 6780 0
cpufreq_powersave 1408 0
cpufreq_stats 3868 0
nfsd 223620 9
exportfs 4016 1 nfsd
nfs 252000 0
lockd 64696 2 nfsd,nfs
fscache 36696 1 nfs
nfs_acl 2860 2 nfsd,nfs
auth_rpcgss 34388 2 nfsd,nfs
sunrpc 181096 10 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ipt_MASQUERADE 2400 1
iptable_nat 5596 1
xt_TCPMSS 3604 1
xt_conntrack 4028 36
xt_tcpudp 2716 195
ip6t_LOG 4864 1
ipt_LOG 4784 39
ip6table_filter 3312 1
ip6_tables 12000 2 ip6t_LOG,ip6table_filter
iptable_filter 3240 1
nf_nat 17316 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ftp 6592 0
nf_conntrack_ipv4 13120 39 iptable_nat,nf_nat
nf_conntrack 64156 6 ipt_MASQUERADE,iptable_nat,xt_conntrack,nf_nat,nf_conntrack_ftp,nf_conntrack_ipv4
nf_defrag_ipv4 1808 1 nf_conntrack_ipv4
ip_tables 10764 2 iptable_nat,iptable_filter
x_tables 16084 9 ipt_MASQUERADE,iptable_nat,xt_TCPMSS,xt_conntrack,xt_tcpudp,ip6t_LOG,ipt_LOG,ip6_tables,ip_tables
fuse 58196 1
ext2 58996 1
hwmon_vid 2576 0
eeprom 5184 0
firewire_sbp2 14016 0
loop 14268 0
snd_ca0106 32032 0
snd_rawmidi 20452 1 snd_ca0106
snd_seq_device 6780 1 snd_rawmidi
snd_ac97_codec 99668 1 snd_ca0106
snd_pcsp 9540 0
ac97_bus 1628 1 snd_ac97_codec
i2c_i801 8952 0
snd_pcm 70136 3 snd_ca0106,snd_ac97_codec,snd_pcsp
snd_timer 19000 1 snd_pcm
i2c_core 21744 2 eeprom,i2c_i801
rng_core 3996 0
snd 54440 7 snd_ca0106,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcsp,snd_pcm,snd_timer
soundcore 6844 1 snd
snd_page_alloc 8716 2 snd_ca0106,snd_pcm
evdev 8832 3
button 5488 0
processor 36772 1 acpi_cpufreq
ext4 284896 8
mbcache 7488 2 ext2,ext4
jbd2 73892 1 ext4
crc16 1840 1 ext4
cbc 3352 9
dm_crypt 12340 9
dm_mod 65432 40 dm_crypt
sd_mod 31840 7
crc_t10dif 1716 1 sd_mod
ide_pci_generic 3784 0
ide_core 97736 1 ide_pci_generic
ata_generic 4500 0
ahci 33412 0
ata_piix 21532 5
uhci_hcd 20568 0
libata 163228 3 ata_generic,ahci,ata_piix
firewire_ohci 20740 0
firewire_core 45276 2 firewire_sbp2,firewire_ohci
crc_itu_t 1892 1 firewire_core
r8169 30624 0
mii 5048 1 r8169
ehci_hcd 32868 0
scsi_mod 143036 3 firewire_sbp2,sd_mod,libata
tg3 97292 0
libphy 23160 1 tg3
usbcore 141496 4 uhci_hcd,ehci_hcd
nls_base 7188 1 usbcore
intel_agp 25752 1
agpgart 33112 1 intel_agp
thermal 13720 0
fan 4460 0
thermal_sys 14396 4 video,processor,thermal,fan
aes_i586 8312 18
aes_generic 27640 1 aes_i586
sha256_generic 11492 0
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
post-up /etc/mm_iptables/mm_iptables_init start
# The primary network interface
# really use hotplug ???
#allow-hotplug eth0
auto eth0
iface eth0 inet static
address 192.168.42.3
netmask 255.255.255.0
broadcast 192.168.42.255
# gateway must not be set here to allow dialup connections
#gateway 192.168.42.3
# hardware address (MAC)
# hwaddress ether
# set MTU for ethernet only network
mtu 1500
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.42.3
dns-search matrix
# handle firewall rules for this interface
post-up /etc/mm_iptables/mm_iptables_localnet start
pre-down /etc/mm_iptables/mm_iptables_localnet stop || true
auto eth1
iface eth1 inet static
address 192.168.40.3
netmask 255.255.255.0
broadcast 192.168.40.255
# gateway must not be set here to allow dialup connections
gateway 192.168.40.1
# hardware address (MAC)
# hwaddress ether
# set MTU for dialup / dsl / internet
mtu 1492
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.42.3
dns-search home
# handle firewall rules for this interface
post-up /etc/mm_iptables/mm_iptables_dmz start
pre-down /etc/mm_iptables/mm_iptables_dmz stop || true
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1492 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:08:54:50:08:d8 brd ff:ff:ff:ff:ff:ff
inet 192.168.40.3/24 brd 192.168.40.255 scope global eth1
inet6 fe80::208:54ff:fe50:8d8/64 scope link
valid_lft forever preferred_lft forever
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:30:1b:ba:73:70 brd ff:ff:ff:ff:ff:ff
inet 192.168.42.3/24 brd 192.168.42.255 scope global eth0
inet6 fe80::230:1bff:feba:7370/64 scope link
valid_lft forever preferred_lft forever
4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/[65534]
inet 10.1.41.3 peer 10.1.41.10/32 scope global tun0
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 18976 258 0 0 0 0 0 0 18976 258 0 0 0 0 0 0
eth1: 48518 332 0 0 0 0 0 0 30390 378 0 0 0 0 0 0
eth0: 84454 855 0 0 0 0 0 0 115085 537 0 0 0 0 0 0
tun0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1475 total packets received
70 forwarded
0 incoming packets discarded
1105 incoming packets delivered
1146 requests sent out
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
IcmpMsg:
InType3: 1
OutType3: 1
Tcp:
4 active connections openings
2 passive connection openings
4 failed connection attempts
0 connection resets received
2 connections established
727 segments received
452 segments send out
0 segments retransmited
0 bad segments received.
9 resets sent
Udp:
377 packets received
1 packets to unknown port received.
0 packet receive errors
627 packets sent
UdpLite:
TcpExt:
4 delayed acks sent
4 packets directly queued to recvmsg prequeue.
230 packet headers predicted
45 acknowledgments not containing data payload received
376 predicted acknowledgments
IpExt:
InBcastPkts: 48
OutBcastPkts: 48
InOctets: 136879
OutOctets: 148461
InBcastOctets: 5833
OutBcastOctets: 5833
*** Device features:
eth0: 0x109a3
eth1: 0x180
lo: 0x13865
tun0: 0x0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ff00 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dff80000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: 00000000dfa00000-00000000dfafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: df900000-df9fffff
Prefetchable memory behind bridge: 00000000df800000-00000000df8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at fb00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express [14e4:169d] (rev 11)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fd11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfdf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at be00 [size=256]
Region 2: Memory at df9ff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at df800000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:09.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at df00 [size=32]
Capabilities: <access denied>
Kernel driver in use: CA0106
03:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dfcff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at de00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 04e6:5115 SCM Microsystems, Inc. SCR335 SmartCard Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.31-1-686-bigmem (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.31-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.31-1-686-bigmem recommends:
ii firmware-linux-free 2.6.31-2 Binary firmware for various driver
ii libc6-i686 2.10.1-7 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.31-1-686-bigmem suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.31 <none> (no description available)
Versions of packages linux-image-2.6.31-1-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.18 Binary firmware for various driver
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.31-1-686-bigmem/postinst/bootloader-error-2.6.31-1-686-bigmem:
linux-image-2.6.31-1-686-bigmem/postinst/depmod-error-initrd-2.6.31-1-686-bigmem: false
linux-image-2.6.31-1-686-bigmem/prerm/removing-running-kernel-2.6.31-1-686-bigmem: true
linux-image-2.6.31-1-686-bigmem/postinst/bootloader-test-error-2.6.31-1-686-bigmem:
linux-image-2.6.31-1-686-bigmem/postinst/missing-firmware-2.6.31-1-686-bigmem:
linux-image-2.6.31-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.31-1-686-bigmem: true
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-2-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.31-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.31-1-686-bigmem recommends:
ii firmware-linux-free 2.6.31-2 Binary firmware for various driver
ii libc6-i686 2.10.1-7 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.31-1-686-bigmem suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.31 <none> (no description available)
Versions of packages linux-image-2.6.31-1-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.18 Binary firmware for various driver
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
next reply other threads:[~2009-11-18 7:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-18 7:39 Ben Hutchings [this message]
2009-11-22 0:56 ` [PATCH 1/1] netfilter: xtables: fix conntrack match v1 ipt-save output Florian Westphal
2009-11-23 9:45 ` Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258529958.2810.36.camel@localhost \
--to=ben@decadent.org.uk \
--cc=556587@bugs.debian.org \
--cc=lists@michel-messerschmidt.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.