From: Alex Vandiver <alex@chmrr.net>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide <linux-ide@vger.kernel.org>
Subject: Re: Intermittent SATA failures ("link offline, clearing class 1 to NONE")
Date: Wed, 02 Dec 2009 12:45:24 -0500 [thread overview]
Message-ID: <1259774491-sup-9212@utwig> (raw)
In-Reply-To: <4B15C64E.7090106@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 184 bytes --]
At Tue Dec 01 20:43:42 -0500 2009, Tejun Heo wrote:
> Can you please try this one?
Good and bad dmesg output attached.
- Alex
--
Networking -- only one letter away from not working
[-- Attachment #2: goodboot.2.6.32-rc8-piix-longer-debounce --]
[-- Type: application/octet-stream, Size: 58093 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc8 (root@morelax) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #3 SMP Wed Dec 2 12:00:16 EST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] modified: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] modified: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf699000 page 4k
[ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 3475a000 - 37fef062
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1554 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 02FEE (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2170 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b23e0 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b1ff0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2020 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 0-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-230000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a03784] TEXT DATA BSS ==> [0001000000 - 0001a03784]
[ 0.000000] #3 [003475a000 - 0037fef062] RAMDISK ==> [003475a000 - 0037fef062]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a04000 - 0001a0432d] BRK ==> [0001a04000 - 0001a0432d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cf699
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2094644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
[ 0.000000] PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002f800000 s91288 r8192 d23400 u131072
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063176
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8123492k/9175040k available (5356k kernel code, 796464k absent, 255084k reserved, 3063k data, 688k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2260.953 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.90 BogoMIPS (lpj=22609530)
[ 0.000156] Security Framework initialized
[ 0.000227] SELinux: Disabled at boot.
[ 0.000816] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002665] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003510] Mount-cache hash table entries: 256
[ 0.003684] Initializing cgroup subsys ns
[ 0.003751] Initializing cgroup subsys cpuacct
[ 0.003821] Initializing cgroup subsys memory
[ 0.003890] Initializing cgroup subsys freezer
[ 0.003957] Initializing cgroup subsys net_cls
[ 0.004037] CPU: Physical Processor ID: 1
[ 0.004102] CPU: Processor Core ID: 0
[ 0.004168] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004279] CPU: L2 cache: 256K
[ 0.004342] CPU: L3 cache: 8192K
[ 0.004407] CPU 0/0x10 -> Node 0
[ 0.004472] mce: CPU supports 9 MCE banks
[ 0.004546] CPU0: Thermal monitoring enabled (TM1)
[ 0.004614] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.004950] using mwait in idle threads.
[ 0.005015] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.005175] ... version: 3
[ 0.005240] ... bit width: 48
[ 0.005306] ... generic registers: 4
[ 0.005371] ... value mask: 0000ffffffffffff
[ 0.005439] ... max period: 000000007fffffff
[ 0.005506] ... fixed-purpose events: 3
[ 0.005572] ... event mask: 000000070000000f
[ 0.007576] ACPI: Core revision 20090903
[ 0.011531] Setting APIC routing to flat
[ 0.012040] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.111915] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.227102] Booting processor 1 APIC 0x12 ip 0x6000
[ 0.237766] Initializing CPU#1
[ 0.386684] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609588)
[ 0.386692] CPU: Physical Processor ID: 1
[ 0.386693] CPU: Processor Core ID: 1
[ 0.386695] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.386696] CPU: L2 cache: 256K
[ 0.386697] CPU: L3 cache: 8192K
[ 0.386699] CPU 1/0x12 -> Node 0
[ 0.386709] CPU1: Thermal monitoring enabled (TM1)
[ 0.386712] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.386734] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.387560] Skipping synchronization checks as TSC is reliable.
[ 0.387698] Booting processor 2 APIC 0x14 ip 0x6000
[ 0.398110] Initializing CPU#2
[ 0.546364] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609636)
[ 0.546371] CPU: Physical Processor ID: 1
[ 0.546372] CPU: Processor Core ID: 2
[ 0.546374] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.546375] CPU: L2 cache: 256K
[ 0.546376] CPU: L3 cache: 8192K
[ 0.546378] CPU 2/0x14 -> Node 0
[ 0.546388] CPU2: Thermal monitoring enabled (TM1)
[ 0.546391] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.546443] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.547337] Booting processor 3 APIC 0x16 ip 0x6000
[ 0.557750] Initializing CPU#3
[ 0.706043] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609624)
[ 0.706050] CPU: Physical Processor ID: 1
[ 0.706051] CPU: Processor Core ID: 3
[ 0.706053] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.706054] CPU: L2 cache: 256K
[ 0.706055] CPU: L3 cache: 8192K
[ 0.706057] CPU 3/0x16 -> Node 0
[ 0.706068] CPU3: Thermal monitoring enabled (TM1)
[ 0.706070] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.706083] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.706976] Booting processor 4 APIC 0x11 ip 0x6000
[ 0.717391] Initializing CPU#4
[ 0.865722] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609618)
[ 0.865730] CPU: Physical Processor ID: 1
[ 0.865732] CPU: Processor Core ID: 0
[ 0.865734] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.865736] CPU: L2 cache: 256K
[ 0.865737] CPU: L3 cache: 8192K
[ 0.865740] CPU 4/0x11 -> Node 0
[ 0.865751] CPU4: Thermal monitoring enabled (TM1)
[ 0.865754] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.865848] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.866743] Booting processor 5 APIC 0x13 ip 0x6000
[ 0.877156] Initializing CPU#5
[ 1.025402] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609615)
[ 1.025408] CPU: Physical Processor ID: 1
[ 1.025409] CPU: Processor Core ID: 1
[ 1.025411] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.025413] CPU: L2 cache: 256K
[ 1.025414] CPU: L3 cache: 8192K
[ 1.025416] CPU 5/0x13 -> Node 0
[ 1.025426] CPU5: Thermal monitoring enabled (TM1)
[ 1.025428] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.025489] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.026382] Booting processor 6 APIC 0x15 ip 0x6000
[ 1.036794] Initializing CPU#6
[ 1.185081] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609616)
[ 1.185087] CPU: Physical Processor ID: 1
[ 1.185088] CPU: Processor Core ID: 2
[ 1.185091] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.185092] CPU: L2 cache: 256K
[ 1.185093] CPU: L3 cache: 8192K
[ 1.185095] CPU 6/0x15 -> Node 0
[ 1.185105] CPU6: Thermal monitoring enabled (TM1)
[ 1.185107] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.185128] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.186026] Booting processor 7 APIC 0x17 ip 0x6000
[ 1.196439] Initializing CPU#7
[ 1.344760] Calibrating delay using timer specific routine.. 4519.41 BogoMIPS (lpj=22597096)
[ 1.344767] CPU: Physical Processor ID: 1
[ 1.344768] CPU: Processor Core ID: 3
[ 1.344770] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.344771] CPU: L2 cache: 256K
[ 1.344772] CPU: L3 cache: 8192K
[ 1.344774] CPU 7/0x17 -> Node 0
[ 1.344785] CPU7: Thermal monitoring enabled (TM1)
[ 1.344787] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.344796] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.345636] Brought up 8 CPUs
[ 1.345701] Total of 8 processors activated (36172.86 BogoMIPS).
[ 1.349461] CPU0 attaching sched-domain:
[ 1.349465] domain 0: span 0,4 level SIBLING
[ 1.349467] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.349471] domain 1: span 0-7 level MC
[ 1.349472] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349481] CPU1 attaching sched-domain:
[ 1.349482] domain 0: span 1,5 level SIBLING
[ 1.349484] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.349487] domain 1: span 0-7 level MC
[ 1.349489] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349496] CPU2 attaching sched-domain:
[ 1.349497] domain 0: span 2,6 level SIBLING
[ 1.349499] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.349502] domain 1: span 0-7 level MC
[ 1.349504] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349511] CPU3 attaching sched-domain:
[ 1.349512] domain 0: span 3,7 level SIBLING
[ 1.349513] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.349517] domain 1: span 0-7 level MC
[ 1.349519] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.349525] CPU4 attaching sched-domain:
[ 1.349527] domain 0: span 0,4 level SIBLING
[ 1.349528] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.349532] domain 1: span 0-7 level MC
[ 1.349534] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349540] CPU5 attaching sched-domain:
[ 1.349542] domain 0: span 1,5 level SIBLING
[ 1.349543] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.349547] domain 1: span 0-7 level MC
[ 1.349548] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349555] CPU6 attaching sched-domain:
[ 1.349556] domain 0: span 2,6 level SIBLING
[ 1.349558] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.349562] domain 1: span 0-7 level MC
[ 1.349563] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349570] CPU7 attaching sched-domain:
[ 1.349571] domain 0: span 3,7 level SIBLING
[ 1.349573] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.349576] domain 1: span 0-7 level MC
[ 1.349578] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.350140] regulator: core version 0.5
[ 1.350228] Time: 17:38:38 Date: 12/02/09
[ 1.350333] NET: Registered protocol family 16
[ 1.350485] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.350571] ACPI: bus type pci registered
[ 1.350696] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.350768] PCI: MCFG area at e0000000 reserved in E820
[ 1.356776] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.356843] PCI: Using configuration type 1 for base access
[ 1.357582] bio: create slab <bio-0> at 0
[ 1.358136] ACPI: EC: Look up EC in DSDT
[ 1.359922] ACPI: BIOS _OSI(Linux) query ignored
[ 1.360089] ACPI: Interpreter enabled
[ 1.360156] ACPI: (supports S0 S4 S5)
[ 1.360362] ACPI: Using IOAPIC for interrupt routing
[ 1.363957] ACPI: No dock devices found.
[ 1.364343] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.364480] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.364551] pci 0000:00:00.0: PME# disabled
[ 1.364674] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.364749] pci 0000:00:01.0: PME# disabled
[ 1.364873] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.364943] pci 0000:00:03.0: PME# disabled
[ 1.365068] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.365138] pci 0000:00:07.0: PME# disabled
[ 1.365391] pci 0000:00:1a.0: reg 20 io port: [0xfc40-0xfc5f]
[ 1.365454] pci 0000:00:1a.1: reg 20 io port: [0xfc60-0xfc7f]
[ 1.365522] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.365573] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.365645] pci 0000:00:1a.7: PME# disabled
[ 1.365758] pci 0000:00:1d.0: reg 20 io port: [0xfc80-0xfc9f]
[ 1.365822] pci 0000:00:1d.1: reg 20 io port: [0xfca0-0xfcbf]
[ 1.365886] pci 0000:00:1d.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 1.365949] pci 0000:00:1d.3: reg 20 io port: [0xfce0-0xfcff]
[ 1.366016] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.366066] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.366138] pci 0000:00:1d.7: PME# disabled
[ 1.366316] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.366403] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.366475] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.366562] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.366648] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.366781] pci 0000:00:1f.2: reg 10 io port: [0xf8e0-0xf8e7]
[ 1.366786] pci 0000:00:1f.2: reg 14 io port: [0xf8d0-0xf8d3]
[ 1.366791] pci 0000:00:1f.2: reg 18 io port: [0xf8e8-0xf8ef]
[ 1.366796] pci 0000:00:1f.2: reg 1c io port: [0xf8d4-0xf8d7]
[ 1.366801] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 1.366806] pci 0000:00:1f.2: reg 24 io port: [0xfc10-0xfc1f]
[ 1.366858] pci 0000:00:1f.5: reg 10 io port: [0xf8f0-0xf8f7]
[ 1.366863] pci 0000:00:1f.5: reg 14 io port: [0xf8d8-0xf8db]
[ 1.366868] pci 0000:00:1f.5: reg 18 io port: [0xf8f8-0xf8ff]
[ 1.366873] pci 0000:00:1f.5: reg 1c io port: [0xf8dc-0xf8df]
[ 1.366878] pci 0000:00:1f.5: reg 20 io port: [0xfc20-0xfc2f]
[ 1.366883] pci 0000:00:1f.5: reg 24 io port: [0xfc30-0xfc3f]
[ 1.366952] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.367001] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.367072] pci 0000:01:00.0: PME# disabled
[ 1.367192] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.367241] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.367312] pci 0000:01:00.1: PME# disabled
[ 1.367410] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.367501] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.367507] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.367513] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.367532] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.367588] pci 0000:00:1e.0: transparent bridge
[ 1.367658] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.367663] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.367680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.368061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.368137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.368212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.368293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.370422] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.371069] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.371713] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.372355] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.372996] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.373639] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.374281] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.374936] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.376748] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.376835] vgaarb: loaded
[ 1.376968] SCSI subsystem initialized
[ 1.377135] libata version 3.00 loaded.
[ 1.377186] usbcore: registered new interface driver usbfs
[ 1.377264] usbcore: registered new interface driver hub
[ 1.377352] usbcore: registered new device driver usb
[ 1.377505] ACPI: WMI: Mapper loaded
[ 1.377570] PCI: Using ACPI for IRQ routing
[ 1.377753] Bluetooth: Core ver 2.15
[ 1.377840] NET: Registered protocol family 31
[ 1.377906] Bluetooth: HCI device and connection manager initialized
[ 1.377976] Bluetooth: HCI socket layer initialized
[ 1.378043] NetLabel: Initializing
[ 1.378107] NetLabel: domain hash size = 128
[ 1.378172] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.378247] NetLabel: unlabeled traffic allowed by default
[ 1.378341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.378629] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.444630] Switching to clocksource tsc
[ 1.446083] pnp: PnP ACPI init
[ 1.446156] ACPI: bus type pnp registered
[ 1.449065] pnp: PnP ACPI: found 13 devices
[ 1.449132] ACPI: ACPI bus type pnp unregistered
[ 1.449207] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.449278] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.449349] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.449419] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.449489] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.449559] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.449629] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.449699] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.449769] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.449841] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.449911] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.449986] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.450060] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.454764] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.454834] pci 0000:00:01.0: IO window: disabled
[ 1.454903] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.454974] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.455043] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.455112] pci 0000:00:03.0: IO window: disabled
[ 1.455181] pci 0000:00:03.0: MEM window: disabled
[ 1.455249] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.455319] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.455387] pci 0000:00:07.0: IO window: disabled
[ 1.455456] pci 0000:00:07.0: MEM window: disabled
[ 1.455524] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.455595] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.455664] pci 0000:00:1e.0: IO window: disabled
[ 1.455733] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.455805] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.455902] alloc irq_desc for 53 on node -1
[ 1.455903] alloc kstat_irqs on node -1
[ 1.455909] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.455989] pci 0000:00:01.0: setting latency timer to 64
[ 1.455995] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456066] pci 0000:00:03.0: setting latency timer to 64
[ 1.456072] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456143] pci 0000:00:07.0: setting latency timer to 64
[ 1.456148] pci 0000:00:1e.0: setting latency timer to 64
[ 1.456152] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.456154] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.456156] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.456158] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.456160] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.456162] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.456163] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.456188] NET: Registered protocol family 2
[ 1.456460] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.457418] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.459010] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.459286] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.459366] TCP reno registered
[ 1.459568] NET: Registered protocol family 1
[ 1.475929] pci 0000:04:03.0: Boot video device
[ 1.475966] Trying to unpack rootfs image as initramfs...
[ 2.610252] Freeing initrd memory: 57940k freed
[ 2.619328] Scanning for low memory corruption every 60 seconds
[ 2.619499] audit: initializing netlink socket (disabled)
[ 2.619575] type=2000 audit(1259775519.510:1): initialized
[ 2.629064] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.630280] VFS: Disk quotas dquot_6.5.2
[ 2.630388] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.630936] fuse init (API version 7.13)
[ 2.631067] msgmni has been set to 15979
[ 2.631346] alg: No test for stdrng (krng)
[ 2.631418] io scheduler noop registered
[ 2.631484] io scheduler anticipatory registered
[ 2.631550] io scheduler deadline registered (default)
[ 2.631649] io scheduler cfq registered
[ 2.631805] alloc irq_desc for 56 on node -1
[ 2.631807] alloc kstat_irqs on node -1
[ 2.631814] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.631821] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.631910] alloc irq_desc for 57 on node -1
[ 2.631911] alloc kstat_irqs on node -1
[ 2.631917] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.631922] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.632011] alloc irq_desc for 58 on node -1
[ 2.632012] alloc kstat_irqs on node -1
[ 2.632017] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.632023] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.632303] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.632333] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.632365] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.632373] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.632458] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.632610] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.632696] ACPI: Power Button [PWRF]
[ 2.633190] Monitor-Mwait will be used to enter C-1 state
[ 2.633209] Monitor-Mwait will be used to enter C-3 state
[ 2.633241] processor LNXCPU:00: registered as cooling_device0
[ 2.633665] processor LNXCPU:01: registered as cooling_device1
[ 2.634080] processor LNXCPU:02: registered as cooling_device2
[ 2.634503] processor LNXCPU:03: registered as cooling_device3
[ 2.634927] processor LNXCPU:04: registered as cooling_device4
[ 2.635342] processor LNXCPU:05: registered as cooling_device5
[ 2.635760] processor LNXCPU:06: registered as cooling_device6
[ 2.636183] processor LNXCPU:07: registered as cooling_device7
[ 2.638863] Linux agpgart interface v0.103
[ 2.638931] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.639092] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.639255] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.639523] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.639703] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.640586] brd: module loaded
[ 2.641001] loop: module loaded
[ 2.641110] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 2.641275] ata_piix 0000:00:1f.2: version 2.13
[ 2.641286] alloc irq_desc for 23 on node -1
[ 2.641287] alloc kstat_irqs on node -1
[ 2.641292] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.641365] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.641677] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.641714] scsi0 : ata_piix
[ 2.641828] scsi1 : ata_piix
[ 2.641914] ata1: SATA max UDMA/133 cmd 0xf8e0 ctl 0xf8d0 bmdma 0xfc00 irq 23
[ 2.641988] ata2: SATA max UDMA/133 cmd 0xf8e8 ctl 0xf8d4 bmdma 0xfc08 irq 23
[ 2.642071] alloc irq_desc for 22 on node -1
[ 2.642073] alloc kstat_irqs on node -1
[ 2.642076] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.642151] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.802100] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.802143] scsi2 : ata_piix
[ 2.802247] scsi3 : ata_piix
[ 2.802331] ata3: SATA max UDMA/133 cmd 0xf8f0 ctl 0xf8d8 bmdma 0xfc20 irq 22
[ 2.802404] ata4: SATA max UDMA/133 cmd 0xf8f8 ctl 0xf8dc bmdma 0xfc28 irq 22
[ 2.803001] Fixed MDIO Bus: probed
[ 2.803089] PPP generic driver version 2.4.2
[ 2.803215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.803297] alloc irq_desc for 19 on node -1
[ 2.803298] alloc kstat_irqs on node -1
[ 2.803302] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.803386] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.803389] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.803488] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.803592] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.807545] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.807555] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.823138] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.823269] usb usb1: configuration #1 chosen from 1 choice
[ 2.823356] hub 1-0:1.0: USB hub found
[ 2.823423] hub 1-0:1.0: 4 ports detected
[ 2.823527] alloc irq_desc for 21 on node -1
[ 2.823529] alloc kstat_irqs on node -1
[ 2.823533] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.823611] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.823614] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.823703] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.823806] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.827738] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.827747] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.843100] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.843214] usb usb2: configuration #1 chosen from 1 choice
[ 2.843302] hub 2-0:1.0: USB hub found
[ 2.843369] hub 2-0:1.0: 4 ports detected
[ 2.843470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.843548] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.843653] alloc irq_desc for 17 on node -1
[ 2.843655] alloc kstat_irqs on node -1
[ 2.843659] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.843733] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.843735] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.843824] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.843935] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000fc40
[ 2.844055] usb usb3: configuration #1 chosen from 1 choice
[ 2.844140] hub 3-0:1.0: USB hub found
[ 2.844208] hub 3-0:1.0: 2 ports detected
[ 2.844304] alloc irq_desc for 18 on node -1
[ 2.844305] alloc kstat_irqs on node -1
[ 2.844309] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.844383] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.844386] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.844473] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.844585] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fc60
[ 2.844705] usb usb4: configuration #1 chosen from 1 choice
[ 2.844789] hub 4-0:1.0: USB hub found
[ 2.844856] hub 4-0:1.0: 2 ports detected
[ 2.844953] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.845027] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.845029] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.845114] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.845219] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000fc80
[ 2.845338] usb usb5: configuration #1 chosen from 1 choice
[ 2.845422] hub 5-0:1.0: USB hub found
[ 2.845489] hub 5-0:1.0: 2 ports detected
[ 2.845584] alloc irq_desc for 20 on node -1
[ 2.845586] alloc kstat_irqs on node -1
[ 2.845590] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.845664] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.845666] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.845752] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.845863] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fca0
[ 2.845983] usb usb6: configuration #1 chosen from 1 choice
[ 2.846067] hub 6-0:1.0: USB hub found
[ 2.846134] hub 6-0:1.0: 2 ports detected
[ 2.846228] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.846302] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.846305] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.846403] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.846507] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fcc0
[ 2.846625] usb usb7: configuration #1 chosen from 1 choice
[ 2.846711] hub 7-0:1.0: USB hub found
[ 2.847948] hub 7-0:1.0: 2 ports detected
[ 2.848044] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.848118] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.848120] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.848210] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.848314] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000fce0
[ 2.848435] usb usb8: configuration #1 chosen from 1 choice
[ 2.848520] hub 8-0:1.0: USB hub found
[ 2.848587] hub 8-0:1.0: 2 ports detected
[ 2.848718] PNP: No PS/2 controller found. Probing ports directly.
[ 2.851518] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.851594] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.851715] mice: PS/2 mouse device common for all mice
[ 2.851814] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.851903] rtc_cmos 00:04: RTC can wake from S4
[ 2.851989] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.852080] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.852243] device-mapper: uevent: version 1.0.3
[ 2.852363] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.852561] device-mapper: multipath: version 1.1.0 loaded
[ 2.852630] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.853051] cpuidle: using governor ladder
[ 2.853319] cpuidle: using governor menu
[ 2.853723] TCP cubic registered
[ 2.853883] NET: Registered protocol family 10
[ 2.854413] lo: Disabled Privacy Extensions
[ 2.854713] NET: Registered protocol family 17
[ 2.854789] Bluetooth: L2CAP ver 2.14
[ 2.854854] Bluetooth: L2CAP socket layer initialized
[ 2.854921] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.854987] Bluetooth: SCO socket layer initialized
[ 2.855067] Bluetooth: RFCOMM TTY layer initialized
[ 2.855135] Bluetooth: RFCOMM socket layer initialized
[ 2.855202] Bluetooth: RFCOMM ver 1.11
[ 2.857131] PM: Resume from disk failed.
[ 2.857137] registered taskstats version 1
[ 2.857594] Magic number: 5:570:642
[ 2.857795] rtc_cmos 00:04: setting system clock to 2009-12-02 17:38:40 UTC (1259775520)
[ 2.857889] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.857957] EDD information not available.
[ 2.862754] ata1.00: XXX debounce start, SStatus=123
[ 2.862830] ata2.00: XXX debounce start, SStatus=123
[ 3.032482] ata4: XXX debounce start, SStatus=4
[ 3.032555] ata3: XXX debounce start, SStatus=113
[ 3.202143] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.352708] usb 1-3: configuration #1 chosen from 1 choice
[ 3.352925] hub 1-3:1.0: USB hub found
[ 3.353168] hub 1-3:1.0: 4 ports detected
[ 3.381749] ata2.00: XXX debounce done, SStatus=123, DET stable for 520 msecs
[ 3.381838] ata1.00: XXX debounce done, SStatus=123, DET stable for 520 msecs
[ 3.550662] ata3: XXX debounce done, SStatus=113, DET stable for 520 msecs
[ 3.550797] ata4: XXX debounce done, SStatus=4, DET stable for 520 msecs
[ 3.561628] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.610539] ata1.01: XXX debounce start, SStatus=123
[ 3.610613] ata2.01: XXX debounce start, SStatus=123
[ 3.650487] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 3.710380] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.731303] ata3.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[ 3.770459] ata3.00: configured for UDMA/100
[ 3.801664] usb 2-3: configuration #1 chosen from 1 choice
[ 4.079641] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.129504] ata2.01: XXX debounce done, SStatus=123, DET stable for 520 msecs
[ 4.129647] ata1.01: XXX debounce done, SStatus=123, DET stable for 520 msecs
[ 4.257318] usb 3-1: configuration #1 chosen from 1 choice
[ 4.289243] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.289327] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.289509] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.289589] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.329674] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 4.329760] ata2.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.329767] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 4.329769] ata1.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.330029] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 4.330102] ata1.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.330279] ata2.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 4.330351] ata2.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.349493] ata2.00: configured for UDMA/133
[ 4.350707] ata1.00: configured for UDMA/133
[ 4.369766] ata2.01: configured for UDMA/133
[ 4.390313] ata1.01: configured for UDMA/133
[ 4.390450] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.390607] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.390729] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.390790] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.390827] sd 0:0:0:0: [sda] Write Protect is off
[ 4.390828] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.390842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.390928] sda:
[ 4.391182] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 4.391369] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.391522] sd 1:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.391528] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 4.391572] scsi 1:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 4.391634] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 4.391740] sd 1:0:1:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.391765] sd 1:0:1:0: [sdd] Write Protect is off
[ 4.391767] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.391780] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.391848] sdd: sda1 sda2
[ 4.397306] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.397384] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 4.397493] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.397560] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.397574] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.397730] sdb:
[ 4.407142] scsi 2:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
[ 4.419966] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 4.420041] Uniform CD-ROM driver Revision: 3.20
[ 4.420155] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.420183] sr 2:0:0:0: Attached scsi generic sg4 type 5
[ 4.538606] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.716648] usb 5-1: configuration #1 chosen from 1 choice
[ 4.863958] sdd1
[ 4.863984] sd 1:0:0:0: [sdc] Write Protect is off
[ 4.863987] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.864007] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.864218] sdd2
[ 4.864420] sdc:
[ 4.864463] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 4.883750] sdb1 sdb2
[ 4.884034] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 4.997686] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 5.168750] usb 5-2: configuration #1 chosen from 1 choice
[ 5.342282] sdc1 sdc2
[ 5.342564] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 5.342642] Freeing unused kernel memory: 688k freed
[ 5.342805] Write protecting the kernel read-only data: 7660k
[ 5.470191] usbcore: registered new interface driver hiddev
[ 5.476559] Initializing USB Mass Storage driver...
[ 5.476722] scsi4 : SCSI emulation for USB Mass Storage devices
[ 5.476845] usb-storage: device found at 4
[ 5.476847] usb-storage: waiting for device to settle before scanning
[ 5.476864] usbcore: registered new interface driver usb-storage
[ 5.476934] USB Mass Storage support registered.
[ 5.477592] md: linear personality registered for level -1
[ 5.479980] md: multipath personality registered for level -4
[ 5.481507] md: raid0 personality registered for level 0
[ 5.483978] md: raid1 personality registered for level 1
[ 5.484924] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
[ 5.485065] generic-usb 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.0-1/input0
[ 5.485352] async_tx: api initialized (async)
[ 5.486037] xor: automatically using best checksumming function: generic_sse
[ 5.500177] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
[ 5.500302] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 5.505154] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
[ 5.505277] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 5.509131] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
[ 5.509263] generic-usb 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 5.509371] usbcore: registered new interface driver usbhid
[ 5.509440] usbhid: v2.6:USB HID core driver
[ 5.527243] generic_sse: 8958.000 MB/sec
[ 5.527374] xor: using function: generic_sse (8958.000 MB/sec)
[ 5.650809] md: bind<sdc1>
[ 5.652283] md: bind<sdd2>
[ 5.680976] md: bind<sda1>
[ 5.682491] md: bind<sda2>
[ 5.697062] raid6: int64x1 2157 MB/s
[ 5.851739] md: bind<sdd1>
[ 5.862623] md: bind<sdc2>
[ 5.866701] raid6: int64x2 2964 MB/s
[ 5.880378] md: bind<sdb1>
[ 5.882250] raid1: raid set md0 active with 4 out of 4 mirrors
[ 5.882351] md0: detected capacity change from 0 to 106823680
[ 5.884398] md0:
[ 5.893068] md: bind<sdb2>
[ 5.893469] unknown partition table
[ 5.894185] md: kicking non-fresh sdc2 from array!
[ 5.894258] md: unbind<sdc2>
[ 6.036380] raid6: int64x4 1920 MB/s
[ 6.206031] raid6: int64x8 2086 MB/s
[ 6.375671] raid6: sse2x1 6231 MB/s
[ 6.545332] raid6: sse2x2 7308 MB/s
[ 6.714993] raid6: sse2x4 8180 MB/s
[ 6.715063] raid6: using algorithm sse2x4 (8180 MB/s)
[ 6.719827] md: raid6 personality registered for level 6
[ 6.719895] md: raid5 personality registered for level 5
[ 6.719962] md: raid4 personality registered for level 4
[ 6.724685] md: raid10 personality registered for level 10
[ 6.765278] md: export_rdev(sdc2)
[ 6.766265] raid5: device sdb2 operational as raid disk 1
[ 6.766337] raid5: device sda2 operational as raid disk 0
[ 6.766623] raid5: allocated 3230kB for md1
[ 6.766799] 1: w=1 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 6.766874] 0: w=2 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 6.766944] raid5: raid level 5 set md1 active with 2 out of 3 devices, algorithm 2
[ 6.767029] RAID5 conf printout:
[ 6.767092] --- rd:3 wd:2
[ 6.767155] disk 0, o:1, dev:sda2
[ 6.767219] disk 1, o:1, dev:sdb2
[ 6.767300] md1: detected capacity change from 0 to 3000384356352
[ 6.767521] RAID5 conf printout:
[ 6.767585] --- rd:3 wd:2
[ 6.767648] disk 0, o:1, dev:sda2
[ 6.767712] disk 1, o:1, dev:sdb2
[ 6.767776] disk 2, o:1, dev:sdd2
[ 6.768003] md: recovery of RAID array md1
[ 6.768069] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 6.768138] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 6.768234] md: using 128k window, over a total of 1465031424 blocks.
[ 6.768543] md1: unknown partition table
[ 7.132214] PM: Starting manual resume from disk
[ 7.132283] PM: Resume from partition 252:2
[ 7.132284] PM: Checking hibernation image.
[ 7.132481] PM: Error -22 checking image file
[ 7.132484] PM: Resume from disk failed.
[ 7.162175] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 8.210942] Adding 950264k swap on /dev/mapper/raid-morelax_swap. Priority:-1 extents:1 across:950264k
[ 8.642559] udev: starting version 147
[ 8.839825] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 10.458005] usb-storage: device scan complete
[ 10.461363] scsi 4:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
[ 10.463225] scsi 4:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
[ 10.463470] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 10.568639] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
[ 10.568733] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 10.568780] sr 4:0:0:0: Attached scsi generic sg5 type 5
[ 10.568850] sd 4:0:0:1: Attached scsi generic sg6 type 0
[ 10.572131] sd 4:0:0:1: [sde] Attached SCSI removable disk
[ 11.014132] lp: driver loaded but no devices found
[ 11.433146] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 11.433160] alloc irq_desc for 36 on node -1
[ 11.433162] alloc kstat_irqs on node -1
[ 11.433169] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 11.433175] bnx2 0000:01:00.0: setting latency timer to 64
[ 11.433363] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 11.917519] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 11.943117] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 00:26:b9:3c:e0:bc
[ 11.943137] alloc irq_desc for 48 on node -1
[ 11.943139] alloc kstat_irqs on node -1
[ 11.943146] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 11.943151] bnx2 0000:01:00.1: setting latency timer to 64
[ 11.943279] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 11.945346] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 11.948004] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 00:26:b9:3c:e0:bd
[ 12.131720] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.857651] alloc irq_desc for 59 on node -1
[ 12.857653] alloc kstat_irqs on node -1
[ 12.857659] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X
[ 12.857660] alloc irq_desc for 60 on node -1
[ 12.857661] alloc kstat_irqs on node -1
[ 12.857664] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 12.857666] alloc irq_desc for 61 on node -1
[ 12.857667] alloc kstat_irqs on node -1
[ 12.857669] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 12.857671] alloc irq_desc for 62 on node -1
[ 12.857672] alloc kstat_irqs on node -1
[ 12.857675] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 12.857676] alloc irq_desc for 63 on node -1
[ 12.857677] alloc kstat_irqs on node -1
[ 12.857682] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 12.857684] alloc irq_desc for 64 on node -1
[ 12.857685] alloc kstat_irqs on node -1
[ 12.857687] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 12.857689] alloc irq_desc for 65 on node -1
[ 12.857690] alloc kstat_irqs on node -1
[ 12.857692] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 12.857693] alloc irq_desc for 66 on node -1
[ 12.857694] alloc kstat_irqs on node -1
[ 12.857697] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 12.857698] alloc irq_desc for 67 on node -1
[ 12.857699] alloc kstat_irqs on node -1
[ 12.857702] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 12.914349] bnx2: eth0: using MSIX
[ 12.915091] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.611057] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 14.611711] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.287952] eth0: no IPv6 routers present
[-- Attachment #3: badboot.2.6.32-rc8-piix-longer-debounce --]
[-- Type: application/octet-stream, Size: 58280 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-rc8 (root@morelax) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #3 SMP Wed Dec 2 12:00:16 EST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 0000000000100000 - 00000000cf699000 (usable)
[ 0.000000] modified: 00000000cf699000 - 00000000cf6af000 (reserved)
[ 0.000000] modified: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf699000 page 4k
[ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 3475a000 - 37fef062
[ 0.000000] ACPI: RSDP 00000000000f1450 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1554 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 02FEE (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2170 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b23e0 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b1ff0 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2020 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 0-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-230000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a03784] TEXT DATA BSS ==> [0001000000 - 0001a03784]
[ 0.000000] #3 [003475a000 - 0037fef062] RAMDISK ==> [003475a000 - 0037fef062]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a04000 - 0001a0432d] BRK ==> [0001a04000 - 0001a0432d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cf699
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2094644
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3831 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
[ 0.000000] PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002f800000 s91288 r8192 d23400 u131072
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063176
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8 root=/dev/mapper/raid-morelax ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8123492k/9175040k available (5356k kernel code, 796464k absent, 255084k reserved, 3063k data, 688k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2261.346 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.69 BogoMIPS (lpj=22613460)
[ 0.000156] Security Framework initialized
[ 0.000224] SELinux: Disabled at boot.
[ 0.000811] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002664] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003509] Mount-cache hash table entries: 256
[ 0.003683] Initializing cgroup subsys ns
[ 0.003750] Initializing cgroup subsys cpuacct
[ 0.003819] Initializing cgroup subsys memory
[ 0.003889] Initializing cgroup subsys freezer
[ 0.003955] Initializing cgroup subsys net_cls
[ 0.004035] CPU: Physical Processor ID: 1
[ 0.004101] CPU: Processor Core ID: 0
[ 0.004168] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004279] CPU: L2 cache: 256K
[ 0.004342] CPU: L3 cache: 8192K
[ 0.004407] CPU 0/0x10 -> Node 0
[ 0.004472] mce: CPU supports 9 MCE banks
[ 0.004545] CPU0: Thermal monitoring enabled (TM1)
[ 0.004614] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.004952] using mwait in idle threads.
[ 0.005017] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.005177] ... version: 3
[ 0.005242] ... bit width: 48
[ 0.005307] ... generic registers: 4
[ 0.005372] ... value mask: 0000ffffffffffff
[ 0.005439] ... max period: 000000007fffffff
[ 0.005506] ... fixed-purpose events: 3
[ 0.005580] ... event mask: 000000070000000f
[ 0.007585] ACPI: Core revision 20090903
[ 0.011539] Setting APIC routing to flat
[ 0.012047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.111941] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.227096] Booting processor 1 APIC 0x12 ip 0x6000
[ 0.237759] Initializing CPU#1
[ 0.386677] Calibrating delay using timer specific routine.. 4521.91 BogoMIPS (lpj=22609583)
[ 0.386684] CPU: Physical Processor ID: 1
[ 0.386685] CPU: Processor Core ID: 1
[ 0.386688] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.386689] CPU: L2 cache: 256K
[ 0.386690] CPU: L3 cache: 8192K
[ 0.386692] CPU 1/0x12 -> Node 0
[ 0.386702] CPU1: Thermal monitoring enabled (TM1)
[ 0.386705] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.386746] CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.387568] Skipping synchronization checks as TSC is reliable.
[ 0.387706] Booting processor 2 APIC 0x14 ip 0x6000
[ 0.398120] Initializing CPU#2
[ 0.546357] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609621)
[ 0.546364] CPU: Physical Processor ID: 1
[ 0.546365] CPU: Processor Core ID: 2
[ 0.546367] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.546368] CPU: L2 cache: 256K
[ 0.546369] CPU: L3 cache: 8192K
[ 0.546371] CPU 2/0x14 -> Node 0
[ 0.546381] CPU2: Thermal monitoring enabled (TM1)
[ 0.546384] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.546487] CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.547380] Booting processor 3 APIC 0x16 ip 0x6000
[ 0.557794] Initializing CPU#3
[ 0.706036] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609626)
[ 0.706043] CPU: Physical Processor ID: 1
[ 0.706044] CPU: Processor Core ID: 3
[ 0.706046] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.706048] CPU: L2 cache: 256K
[ 0.706048] CPU: L3 cache: 8192K
[ 0.706050] CPU 3/0x16 -> Node 0
[ 0.706061] CPU3: Thermal monitoring enabled (TM1)
[ 0.706064] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.706164] CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.707053] Booting processor 4 APIC 0x11 ip 0x6000
[ 0.717470] Initializing CPU#4
[ 0.865716] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609632)
[ 0.865723] CPU: Physical Processor ID: 1
[ 0.865725] CPU: Processor Core ID: 0
[ 0.865727] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.865729] CPU: L2 cache: 256K
[ 0.865730] CPU: L3 cache: 8192K
[ 0.865733] CPU 4/0x11 -> Node 0
[ 0.865744] CPU4: Thermal monitoring enabled (TM1)
[ 0.865747] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.865844] CPU4: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.866756] Booting processor 5 APIC 0x13 ip 0x6000
[ 0.877170] Initializing CPU#5
[ 1.025395] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609614)
[ 1.025401] CPU: Physical Processor ID: 1
[ 1.025402] CPU: Processor Core ID: 1
[ 1.025404] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.025406] CPU: L2 cache: 256K
[ 1.025407] CPU: L3 cache: 8192K
[ 1.025409] CPU 5/0x13 -> Node 0
[ 1.025419] CPU5: Thermal monitoring enabled (TM1)
[ 1.025421] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.025437] CPU5: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.026330] Booting processor 6 APIC 0x15 ip 0x6000
[ 1.036744] Initializing CPU#6
[ 1.185074] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609640)
[ 1.185080] CPU: Physical Processor ID: 1
[ 1.185081] CPU: Processor Core ID: 2
[ 1.185083] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.185085] CPU: L2 cache: 256K
[ 1.185086] CPU: L3 cache: 8192K
[ 1.185088] CPU 6/0x15 -> Node 0
[ 1.185098] CPU6: Thermal monitoring enabled (TM1)
[ 1.185100] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.185111] CPU6: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.186015] Booting processor 7 APIC 0x17 ip 0x6000
[ 1.196430] Initializing CPU#7
[ 1.344753] Calibrating delay using timer specific routine.. 4521.92 BogoMIPS (lpj=22609607)
[ 1.344760] CPU: Physical Processor ID: 1
[ 1.344761] CPU: Processor Core ID: 3
[ 1.344763] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.344764] CPU: L2 cache: 256K
[ 1.344765] CPU: L3 cache: 8192K
[ 1.344767] CPU 7/0x17 -> Node 0
[ 1.344778] CPU7: Thermal monitoring enabled (TM1)
[ 1.344780] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.344797] CPU7: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 1.345633] Brought up 8 CPUs
[ 1.345697] Total of 8 processors activated (36176.15 BogoMIPS).
[ 1.349462] CPU0 attaching sched-domain:
[ 1.349465] domain 0: span 0,4 level SIBLING
[ 1.349467] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.349471] domain 1: span 0-7 level MC
[ 1.349473] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349481] CPU1 attaching sched-domain:
[ 1.349483] domain 0: span 1,5 level SIBLING
[ 1.349485] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.349488] domain 1: span 0-7 level MC
[ 1.349490] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349497] CPU2 attaching sched-domain:
[ 1.349498] domain 0: span 2,6 level SIBLING
[ 1.349500] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.349503] domain 1: span 0-7 level MC
[ 1.349505] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349511] CPU3 attaching sched-domain:
[ 1.349513] domain 0: span 3,7 level SIBLING
[ 1.349514] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.349518] domain 1: span 0-7 level MC
[ 1.349519] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.349526] CPU4 attaching sched-domain:
[ 1.349527] domain 0: span 0,4 level SIBLING
[ 1.349529] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.349533] domain 1: span 0-7 level MC
[ 1.349534] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.349541] CPU5 attaching sched-domain:
[ 1.349542] domain 0: span 1,5 level SIBLING
[ 1.349544] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.349548] domain 1: span 0-7 level MC
[ 1.349549] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.349556] CPU6 attaching sched-domain:
[ 1.349557] domain 0: span 2,6 level SIBLING
[ 1.349559] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.349562] domain 1: span 0-7 level MC
[ 1.349564] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.349570] CPU7 attaching sched-domain:
[ 1.349572] domain 0: span 3,7 level SIBLING
[ 1.349573] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.349577] domain 1: span 0-7 level MC
[ 1.349578] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.350143] regulator: core version 0.5
[ 1.350231] Time: 17:12:29 Date: 12/02/09
[ 1.350335] NET: Registered protocol family 16
[ 1.350487] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.350573] ACPI: bus type pci registered
[ 1.350697] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.350769] PCI: MCFG area at e0000000 reserved in E820
[ 1.356777] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.356845] PCI: Using configuration type 1 for base access
[ 1.357585] bio: create slab <bio-0> at 0
[ 1.358138] ACPI: EC: Look up EC in DSDT
[ 1.359921] ACPI: BIOS _OSI(Linux) query ignored
[ 1.360088] ACPI: Interpreter enabled
[ 1.360154] ACPI: (supports S0 S4 S5)
[ 1.360361] ACPI: Using IOAPIC for interrupt routing
[ 1.363957] ACPI: No dock devices found.
[ 1.364342] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.364479] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.364550] pci 0000:00:00.0: PME# disabled
[ 1.364673] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.364747] pci 0000:00:01.0: PME# disabled
[ 1.364872] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.364942] pci 0000:00:03.0: PME# disabled
[ 1.365066] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.365137] pci 0000:00:07.0: PME# disabled
[ 1.365390] pci 0000:00:1a.0: reg 20 io port: [0xfc40-0xfc5f]
[ 1.365455] pci 0000:00:1a.1: reg 20 io port: [0xfc60-0xfc7f]
[ 1.365523] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.365574] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.365645] pci 0000:00:1a.7: PME# disabled
[ 1.365758] pci 0000:00:1d.0: reg 20 io port: [0xfc80-0xfc9f]
[ 1.365823] pci 0000:00:1d.1: reg 20 io port: [0xfca0-0xfcbf]
[ 1.365887] pci 0000:00:1d.2: reg 20 io port: [0xfcc0-0xfcdf]
[ 1.365951] pci 0000:00:1d.3: reg 20 io port: [0xfce0-0xfcff]
[ 1.366017] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.366069] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.366141] pci 0000:00:1d.7: PME# disabled
[ 1.366327] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.366414] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.366486] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.366573] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.366662] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.366795] pci 0000:00:1f.2: reg 10 io port: [0xf8e0-0xf8e7]
[ 1.366800] pci 0000:00:1f.2: reg 14 io port: [0xf8d0-0xf8d3]
[ 1.366805] pci 0000:00:1f.2: reg 18 io port: [0xf8e8-0xf8ef]
[ 1.366810] pci 0000:00:1f.2: reg 1c io port: [0xf8d4-0xf8d7]
[ 1.366815] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
[ 1.366820] pci 0000:00:1f.2: reg 24 io port: [0xfc10-0xfc1f]
[ 1.366873] pci 0000:00:1f.5: reg 10 io port: [0xf8f0-0xf8f7]
[ 1.366878] pci 0000:00:1f.5: reg 14 io port: [0xf8d8-0xf8db]
[ 1.366883] pci 0000:00:1f.5: reg 18 io port: [0xf8f8-0xf8ff]
[ 1.366888] pci 0000:00:1f.5: reg 1c io port: [0xf8dc-0xf8df]
[ 1.366893] pci 0000:00:1f.5: reg 20 io port: [0xfc20-0xfc2f]
[ 1.366898] pci 0000:00:1f.5: reg 24 io port: [0xfc30-0xfc3f]
[ 1.366968] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.367016] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.367087] pci 0000:01:00.0: PME# disabled
[ 1.367200] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.367248] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.367319] pci 0000:01:00.1: PME# disabled
[ 1.367417] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.367508] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.367514] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.367521] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.367540] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.367596] pci 0000:00:1e.0: transparent bridge
[ 1.367666] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.367672] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.367689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.368070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.368146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.368220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.368301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.370432] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.371079] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.371722] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.372363] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.373004] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.373644] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.374286] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.374940] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.376594] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.376681] vgaarb: loaded
[ 1.376814] SCSI subsystem initialized
[ 1.376981] libata version 3.00 loaded.
[ 1.377033] usbcore: registered new interface driver usbfs
[ 1.377110] usbcore: registered new interface driver hub
[ 1.377197] usbcore: registered new device driver usb
[ 1.377351] ACPI: WMI: Mapper loaded
[ 1.377416] PCI: Using ACPI for IRQ routing
[ 1.377598] Bluetooth: Core ver 2.15
[ 1.377685] NET: Registered protocol family 31
[ 1.377752] Bluetooth: HCI device and connection manager initialized
[ 1.377821] Bluetooth: HCI socket layer initialized
[ 1.377888] NetLabel: Initializing
[ 1.377952] NetLabel: domain hash size = 128
[ 1.378017] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.378092] NetLabel: unlabeled traffic allowed by default
[ 1.378187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.378474] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.444627] Switching to clocksource tsc
[ 1.446085] pnp: PnP ACPI init
[ 1.446157] ACPI: bus type pnp registered
[ 1.449063] pnp: PnP ACPI: found 13 devices
[ 1.449130] ACPI: ACPI bus type pnp unregistered
[ 1.449205] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.449276] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.449347] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.449417] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.449487] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.449557] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.449627] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.449697] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.449766] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.449839] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.449909] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.449984] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.450058] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.454766] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.454835] pci 0000:00:01.0: IO window: disabled
[ 1.454904] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.454975] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.455044] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.455112] pci 0000:00:03.0: IO window: disabled
[ 1.455181] pci 0000:00:03.0: MEM window: disabled
[ 1.455250] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.455319] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.455388] pci 0000:00:07.0: IO window: disabled
[ 1.455457] pci 0000:00:07.0: MEM window: disabled
[ 1.455525] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.455596] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.455664] pci 0000:00:1e.0: IO window: disabled
[ 1.455734] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.455805] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.455901] alloc irq_desc for 53 on node -1
[ 1.455903] alloc kstat_irqs on node -1
[ 1.455908] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.455980] pci 0000:00:01.0: setting latency timer to 64
[ 1.455986] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456058] pci 0000:00:03.0: setting latency timer to 64
[ 1.456063] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.456135] pci 0000:00:07.0: setting latency timer to 64
[ 1.456140] pci 0000:00:1e.0: setting latency timer to 64
[ 1.456143] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.456145] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.456147] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.456150] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.456151] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.456153] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.456155] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.456179] NET: Registered protocol family 2
[ 1.456451] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.457410] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.459004] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.459283] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.459353] TCP reno registered
[ 1.459556] NET: Registered protocol family 1
[ 1.475934] pci 0000:04:03.0: Boot video device
[ 1.475971] Trying to unpack rootfs image as initramfs...
[ 2.610226] Freeing initrd memory: 57940k freed
[ 2.619303] Scanning for low memory corruption every 60 seconds
[ 2.619474] audit: initializing netlink socket (disabled)
[ 2.619550] type=2000 audit(1259773950.510:1): initialized
[ 2.629039] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.630256] VFS: Disk quotas dquot_6.5.2
[ 2.630365] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.630913] fuse init (API version 7.13)
[ 2.631043] msgmni has been set to 15979
[ 2.631323] alg: No test for stdrng (krng)
[ 2.631395] io scheduler noop registered
[ 2.631461] io scheduler anticipatory registered
[ 2.631527] io scheduler deadline registered (default)
[ 2.631626] io scheduler cfq registered
[ 2.631782] alloc irq_desc for 56 on node -1
[ 2.631783] alloc kstat_irqs on node -1
[ 2.631791] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.631797] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.631886] alloc irq_desc for 57 on node -1
[ 2.631888] alloc kstat_irqs on node -1
[ 2.631893] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.631899] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.631987] alloc irq_desc for 58 on node -1
[ 2.631989] alloc kstat_irqs on node -1
[ 2.631994] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.631999] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.632278] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.632309] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.632340] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.632348] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.632433] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.632586] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.632672] ACPI: Power Button [PWRF]
[ 2.633164] Monitor-Mwait will be used to enter C-1 state
[ 2.633182] Monitor-Mwait will be used to enter C-3 state
[ 2.633214] processor LNXCPU:00: registered as cooling_device0
[ 2.633633] processor LNXCPU:01: registered as cooling_device1
[ 2.634053] processor LNXCPU:02: registered as cooling_device2
[ 2.634477] processor LNXCPU:03: registered as cooling_device3
[ 2.634901] processor LNXCPU:04: registered as cooling_device4
[ 2.635316] processor LNXCPU:05: registered as cooling_device5
[ 2.635734] processor LNXCPU:06: registered as cooling_device6
[ 2.636158] processor LNXCPU:07: registered as cooling_device7
[ 2.638838] Linux agpgart interface v0.103
[ 2.638906] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.639066] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.639222] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.639489] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.639669] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.640552] brd: module loaded
[ 2.640965] loop: module loaded
[ 2.641073] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 2.641238] ata_piix 0000:00:1f.2: version 2.13
[ 2.641249] alloc irq_desc for 23 on node -1
[ 2.641250] alloc kstat_irqs on node -1
[ 2.641254] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.641327] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.641638] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.641676] scsi0 : ata_piix
[ 2.641789] scsi1 : ata_piix
[ 2.641875] ata1: SATA max UDMA/133 cmd 0xf8e0 ctl 0xf8d0 bmdma 0xfc00 irq 23
[ 2.641949] ata2: SATA max UDMA/133 cmd 0xf8e8 ctl 0xf8d4 bmdma 0xfc08 irq 23
[ 2.642032] alloc irq_desc for 22 on node -1
[ 2.642033] alloc kstat_irqs on node -1
[ 2.642037] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.642111] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.792350] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.792393] scsi2 : ata_piix
[ 2.792497] scsi3 : ata_piix
[ 2.792581] ata3: SATA max UDMA/133 cmd 0xf8f0 ctl 0xf8d8 bmdma 0xfc20 irq 22
[ 2.792653] ata4: SATA max UDMA/133 cmd 0xf8f8 ctl 0xf8dc bmdma 0xfc28 irq 22
[ 2.793252] Fixed MDIO Bus: probed
[ 2.793339] PPP generic driver version 2.4.2
[ 2.793464] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.793546] alloc irq_desc for 19 on node -1
[ 2.793547] alloc kstat_irqs on node -1
[ 2.793552] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.793635] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.793638] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.793737] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.793841] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.797784] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.797794] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.813394] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.813524] usb usb1: configuration #1 chosen from 1 choice
[ 2.813611] hub 1-0:1.0: USB hub found
[ 2.813679] hub 1-0:1.0: 4 ports detected
[ 2.813783] alloc irq_desc for 21 on node -1
[ 2.813784] alloc kstat_irqs on node -1
[ 2.813788] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.813866] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.813869] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.813958] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.814061] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.818007] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.818017] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.833359] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.833473] usb usb2: configuration #1 chosen from 1 choice
[ 2.833560] hub 2-0:1.0: USB hub found
[ 2.833627] hub 2-0:1.0: 4 ports detected
[ 2.833728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.833805] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.833910] alloc irq_desc for 17 on node -1
[ 2.833912] alloc kstat_irqs on node -1
[ 2.833916] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.833990] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.833992] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.834081] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.834191] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000fc40
[ 2.834312] usb usb3: configuration #1 chosen from 1 choice
[ 2.834396] hub 3-0:1.0: USB hub found
[ 2.834463] hub 3-0:1.0: 2 ports detected
[ 2.834560] alloc irq_desc for 18 on node -1
[ 2.834561] alloc kstat_irqs on node -1
[ 2.834565] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.834639] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.834641] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.834728] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.834840] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fc60
[ 2.834959] usb usb4: configuration #1 chosen from 1 choice
[ 2.835043] hub 4-0:1.0: USB hub found
[ 2.835110] hub 4-0:1.0: 2 ports detected
[ 2.835206] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.835280] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.835283] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.835368] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.835472] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000fc80
[ 2.835592] usb usb5: configuration #1 chosen from 1 choice
[ 2.835676] hub 5-0:1.0: USB hub found
[ 2.835742] hub 5-0:1.0: 2 ports detected
[ 2.835838] alloc irq_desc for 20 on node -1
[ 2.835839] alloc kstat_irqs on node -1
[ 2.835843] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.835917] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.835919] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.836005] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.836116] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fca0
[ 2.836235] usb usb6: configuration #1 chosen from 1 choice
[ 2.836319] hub 6-0:1.0: USB hub found
[ 2.836386] hub 6-0:1.0: 2 ports detected
[ 2.836481] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.836555] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.836557] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.836651] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.836755] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fcc0
[ 2.836873] usb usb7: configuration #1 chosen from 1 choice
[ 2.836958] hub 7-0:1.0: USB hub found
[ 2.838162] hub 7-0:1.0: 2 ports detected
[ 2.838258] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.838332] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.838334] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.838424] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.838528] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000fce0
[ 2.838649] usb usb8: configuration #1 chosen from 1 choice
[ 2.838735] hub 8-0:1.0: USB hub found
[ 2.838802] hub 8-0:1.0: 2 ports detected
[ 2.838932] PNP: No PS/2 controller found. Probing ports directly.
[ 2.841736] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.841812] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.841933] mice: PS/2 mouse device common for all mice
[ 2.842034] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.842123] rtc_cmos 00:04: RTC can wake from S4
[ 2.842209] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.842299] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.842468] device-mapper: uevent: version 1.0.3
[ 2.842588] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.842788] device-mapper: multipath: version 1.1.0 loaded
[ 2.842857] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.843286] cpuidle: using governor ladder
[ 2.843560] cpuidle: using governor menu
[ 2.843965] TCP cubic registered
[ 2.844125] NET: Registered protocol family 10
[ 2.844654] lo: Disabled Privacy Extensions
[ 2.844954] NET: Registered protocol family 17
[ 2.845031] Bluetooth: L2CAP ver 2.14
[ 2.845095] Bluetooth: L2CAP socket layer initialized
[ 2.845162] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.845228] Bluetooth: SCO socket layer initialized
[ 2.845316] Bluetooth: RFCOMM TTY layer initialized
[ 2.845383] Bluetooth: RFCOMM socket layer initialized
[ 2.845450] Bluetooth: RFCOMM ver 1.11
[ 2.847204] PM: Resume from disk failed.
[ 2.847210] registered taskstats version 1
[ 2.847668] Magic number: 5:158:238
[ 2.847870] rtc_cmos 00:04: setting system clock to 2009-12-02 17:12:31 UTC (1259773951)
[ 2.847963] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.848031] EDD information not available.
[ 2.862326] ata2.00: XXX debounce start, SStatus=123
[ 2.862331] ata1.00: XXX debounce start, SStatus=123
[ 3.022820] ata4: XXX debounce start, SStatus=4
[ 3.022893] ata3: XXX debounce start, SStatus=113
[ 3.192510] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.342950] usb 1-3: configuration #1 chosen from 1 choice
[ 3.343164] hub 1-3:1.0: USB hub found
[ 3.343384] hub 1-3:1.0: 4 ports detected
[ 3.381373] ata1.00: XXX debounce done, SStatus=123, DET stable for 520 msecs
[ 3.381378] ata2.00: XXX debounce done, SStatus=123, DET stable for 520 msecs
[ 3.541094] ata4: XXX debounce done, SStatus=4, DET stable for 520 msecs
[ 3.551946] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.551954] ata3: XXX debounce done, SStatus=113, DET stable for 530 msecs
[ 3.610995] ata1.01: XXX debounce start, SStatus=0
[ 3.610999] ata2.01: XXX debounce start, SStatus=0
[ 3.640917] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 3.710827] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.731007] ata3.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
[ 3.770925] ata3.00: configured for UDMA/100
[ 3.791817] usb 2-3: configuration #1 chosen from 1 choice
[ 4.070109] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.247579] usb 3-1: configuration #1 chosen from 1 choice
[ 4.529285] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.707950] usb 5-1: configuration #1 chosen from 1 choice
[ 4.988426] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 5.152066] usb 5-2: configuration #1 chosen from 1 choice
[ 5.647272] ata1.01: COMRESET failed (errno=-32)
[ 5.647276] ata2.01: COMRESET failed (errno=-32)
[ 5.647280] ata2.01: reset failed (errno=-32), retrying in 7 secs
[ 5.647494] ata1.01: reset failed (errno=-32), retrying in 7 secs
[ 12.614492] ata1.01: limiting SATA link speed to 1.5 Gbps
[ 12.614496] ata2.01: limiting SATA link speed to 1.5 Gbps
[ 12.844064] ata1.00: XXX debounce start, SStatus=0
[ 12.844069] ata2.00: XXX debounce start, SStatus=0
[ 14.920289] ata2.00: COMRESET failed (errno=-32)
[ 14.920293] ata1.00: COMRESET failed (errno=-32)
[ 14.920297] ata1.00: reset failed (errno=-32), retrying in 8 secs
[ 14.920501] ata2.00: reset failed (errno=-32), retrying in 8 secs
[ 22.596220] ata1.00: limiting SATA link speed to 1.5 Gbps
[ 22.596224] ata2.00: limiting SATA link speed to 1.5 Gbps
[ 22.825772] ata2.00: XXX debounce start, SStatus=113
[ 22.825776] ata1.00: XXX debounce start, SStatus=113
[ 24.941939] ata1.00: COMRESET failed (errno=-32)
[ 24.942015] ata1.00: reset failed (errno=-32), retrying in 33 secs
[ 25.261357] ata2.00: XXX debounce done, SStatus=0, DET stable for 520 msecs
[ 25.490917] ata2.01: XXX debounce start, SStatus=113
[ 26.009983] ata2.01: XXX debounce done, SStatus=113, DET stable for 520 msecs
[ 26.169739] ata2.00: SATA link down (SStatus 0 SControl 311)
[ 26.169821] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 26.200488] ata2.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 26.200563] ata2.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 26.220486] ata2.01: configured for UDMA/133
[ 57.761817] ata1.00: XXX debounce start, SStatus=113
[ 58.280897] ata1.00: XXX debounce done, SStatus=113, DET stable for 520 msecs
[ 58.510447] ata1.01: XXX debounce start, SStatus=113
[ 59.029523] ata1.01: XXX debounce done, SStatus=113, DET stable for 520 msecs
[ 59.189269] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 59.189354] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 59.229635] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 59.229711] ata1.00: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 59.229998] ata1.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 59.230074] ata1.01: 2930277168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 59.249621] ata1.00: configured for UDMA/133
[ 59.269592] ata1.01: configured for UDMA/133
[ 59.269807] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 59.269964] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 59.270077] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 59.270204] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 59.270244] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 59.270267] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 59.270393] sd 0:0:1:0: [sdb] Write Protect is off
[ 59.270394] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 59.270408] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 59.270487] sdb:
[ 59.270614] scsi 1:0:1:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 59.270676] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 59.270864] sd 1:0:1:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 59.270889] sd 1:0:1:0: [sdc] Write Protect is off
[ 59.270891] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 59.270904] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 59.270974] sdc:
[ 59.285979] scsi 2:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
[ 59.298802] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 59.298878] Uniform CD-ROM driver Revision: 3.20
[ 59.298994] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 59.299022] sr 2:0:0:0: Attached scsi generic sg3 type 5
[ 59.728009] sdc1 sdc2
[ 59.728316] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 59.762062] sdb1 sdb2
[ 59.762343] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 59.762430] sd 0:0:0:0: [sda] Write Protect is off
[ 59.762497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 59.762511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 59.762674] sda: sda1 sda2
[ 59.773254] sd 0:0:0:0: [sda] Attached SCSI disk
[ 59.773334] Freeing unused kernel memory: 688k freed
[ 59.773495] Write protecting the kernel read-only data: 7660k
[ 59.910916] usbcore: registered new interface driver hiddev
[ 59.917353] Initializing USB Mass Storage driver...
[ 59.917536] scsi4 : SCSI emulation for USB Mass Storage devices
[ 59.917672] usb-storage: device found at 4
[ 59.917674] usb-storage: waiting for device to settle before scanning
[ 59.917700] usbcore: registered new interface driver usb-storage
[ 59.917772] USB Mass Storage support registered.
[ 59.918678] md: linear personality registered for level -1
[ 59.920790] md: multipath personality registered for level -4
[ 59.922315] md: raid0 personality registered for level 0
[ 59.924789] md: raid1 personality registered for level 1
[ 59.926129] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
[ 59.926158] async_tx: api initialized (async)
[ 59.926335] generic-usb 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.0-1/input0
[ 59.926781] xor: automatically using best checksumming function: generic_sse
[ 59.941376] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
[ 59.941501] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 59.946343] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
[ 59.946466] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 59.950336] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
[ 59.950470] generic-usb 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 59.950578] usbcore: registered new interface driver usbhid
[ 59.950648] usbhid: v2.6:USB HID core driver
[ 59.968579] generic_sse: 8930.400 MB/sec
[ 59.968647] xor: using function: generic_sse (8930.400 MB/sec)
[ 60.069242] md: bind<sdc2>
[ 60.069336] md: bind<sdc1>
[ 60.138283] raid6: int64x1 1779 MB/s
[ 60.157341] md: bind<sdb2>
[ 60.159051] md: bind<sda1>
[ 60.307971] raid6: int64x2 2046 MB/s
[ 60.362258] md: bind<sda2>
[ 60.363094] md: bind<sdb1>
[ 60.477731] raid6: int64x4 1905 MB/s
[ 60.647412] raid6: int64x8 1989 MB/s
[ 60.817091] raid6: sse2x1 5931 MB/s
[ 60.986830] raid6: sse2x2 7028 MB/s
[ 61.156536] raid6: sse2x4 8214 MB/s
[ 61.156605] raid6: using algorithm sse2x4 (8214 MB/s)
[ 61.161470] md: raid6 personality registered for level 6
[ 61.161538] md: raid5 personality registered for level 5
[ 61.161605] md: raid4 personality registered for level 4
[ 61.163419] raid5: device sda2 operational as raid disk 0
[ 61.163488] raid5: device sdb2 operational as raid disk 1
[ 61.163777] raid5: allocated 3230kB for md1
[ 61.163951] 0: w=1 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 61.164026] 1: w=2 pa=0 pr=3 m=1 a=2 r=3 op1=0 op2=0
[ 61.164093] raid5: raid level 5 set md1 active with 2 out of 3 devices, algorithm 2
[ 61.164178] RAID5 conf printout:
[ 61.164241] --- rd:3 wd:2
[ 61.164303] disk 0, o:1, dev:sda2
[ 61.164374] disk 1, o:1, dev:sdb2
[ 61.164466] md1: detected capacity change from 0 to 3000384356352
[ 61.164658] RAID5 conf printout:
[ 61.164727] --- rd:3 wd:2
[ 61.164791] disk 0, o:1, dev:sda2
[ 61.164854] disk 1, o:1, dev:sdb2
[ 61.164918] disk 2, o:1, dev:sdc2
[ 61.165055] md: recovery of RAID array md1
[ 61.165122] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 61.165190] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 61.165284] md: using 128k window, over a total of 1465031424 blocks.
[ 61.165717] md1:
[ 61.166781] md: raid10 personality registered for level 10
[ 61.193199] unknown partition table
[ 61.501611] PM: Starting manual resume from disk
[ 61.501679] PM: Resume from partition 252:2
[ 61.501680] PM: Checking hibernation image.
[ 61.501897] PM: Error -22 checking image file
[ 61.501899] PM: Resume from disk failed.
[ 61.519637] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 62.698698] Adding 950264k swap on /dev/mapper/raid-morelax_swap. Priority:-1 extents:1 across:950264k
[ 63.217736] udev: starting version 147
[ 64.539365] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 64.840338] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 64.840353] alloc irq_desc for 36 on node -1
[ 64.840355] alloc kstat_irqs on node -1
[ 64.840361] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 64.840367] bnx2 0000:01:00.0: setting latency timer to 64
[ 64.840575] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 64.909693] usb-storage: device scan complete
[ 64.912936] scsi 4:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
[ 64.926655] scsi 4:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
[ 64.957996] lp: driver loaded but no devices found
[ 65.035802] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
[ 65.035893] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 65.036024] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 65.036116] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 65.039293] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 65.122647] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 65.133060] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 00:26:b9:3c:e0:bc
[ 65.133084] alloc irq_desc for 48 on node -1
[ 65.133086] alloc kstat_irqs on node -1
[ 65.133093] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 65.133099] bnx2 0000:01:00.1: setting latency timer to 64
[ 65.133230] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 65.135619] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 65.138532] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 00:26:b9:3c:e0:bd
[ 65.161505] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 66.257043] alloc irq_desc for 59 on node -1
[ 66.257045] alloc kstat_irqs on node -1
[ 66.257051] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X
[ 66.257052] alloc irq_desc for 60 on node -1
[ 66.257053] alloc kstat_irqs on node -1
[ 66.257056] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 66.257057] alloc irq_desc for 61 on node -1
[ 66.257059] alloc kstat_irqs on node -1
[ 66.257061] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 66.257063] alloc irq_desc for 62 on node -1
[ 66.257064] alloc kstat_irqs on node -1
[ 66.257068] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 66.257070] alloc irq_desc for 63 on node -1
[ 66.257071] alloc kstat_irqs on node -1
[ 66.257074] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 66.257076] alloc irq_desc for 64 on node -1
[ 66.257077] alloc kstat_irqs on node -1
[ 66.257080] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 66.257081] alloc irq_desc for 65 on node -1
[ 66.257082] alloc kstat_irqs on node -1
[ 66.257085] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 66.257086] alloc irq_desc for 66 on node -1
[ 66.257087] alloc kstat_irqs on node -1
[ 66.257090] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 66.257091] alloc irq_desc for 67 on node -1
[ 66.257092] alloc kstat_irqs on node -1
[ 66.257095] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 66.318511] bnx2: eth0: using MSIX
[ 66.319171] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 67.952362] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
[ 67.953209] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 78.098315] eth0: no IPv6 routers present
next prev parent reply other threads:[~2009-12-02 17:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-12 19:43 Intermittent SATA failures ("link offline, clearing class 1 to NONE") Alex Vandiver
2009-12-01 6:04 ` Tejun Heo
2009-12-01 7:37 ` Alex Vandiver
2009-12-01 8:12 ` Tejun Heo
2009-12-01 8:31 ` Tejun Heo
2009-12-01 22:02 ` Alex Vandiver
2009-12-02 1:43 ` Tejun Heo
2009-12-02 17:45 ` Alex Vandiver [this message]
2009-12-03 0:19 ` Tejun Heo
2009-12-03 0:42 ` Tejun Heo
2009-12-18 23:26 ` Alex Vandiver
2009-12-21 4:50 ` Tejun Heo
2009-12-21 19:13 ` Alex Vandiver
2009-12-22 0:06 ` Tejun Heo
[not found] <r2qf7a305db1004270252le438bd88vb3ca3d9b753651a9@mail.gmail.com>
2010-04-27 9:55 ` coptang
2010-05-17 9:52 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259774491-sup-9212@utwig \
--to=alex@chmrr.net \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.