From: Stefani Seibold <stefani@seibold.net>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
Mauro Carvalho Chehab <mchehab@infradead.org>
Subject: [patch] media video cx23888 driver: ported to new kfifo API
Date: Fri, 18 Dec 2009 09:12:34 +0100 [thread overview]
Message-ID: <1261123954.13116.4.camel@wall-e> (raw)
This patch will fix the cx23888 driver to use the new kfifo API.
The patch-set is against current mm tree from 11-Dec-2009
Greetings,
Stefani
Signed-off-by: Stefani Seibold <stefani@seibold.net>
---
cx23888-ir.c | 35 ++++++++++-------------------------
1 file changed, 10 insertions(+), 25 deletions(-)
--- mmotm.orig/drivers/media/video/cx23885/cx23888-ir.c 2009-12-18 08:42:53.936778002 +0100
+++ mmotm/drivers/media/video/cx23885/cx23888-ir.c 2009-12-18 09:03:04.808703259 +0100
@@ -124,15 +124,12 @@ struct cx23888_ir_state {
atomic_t rxclk_divider;
atomic_t rx_invert;
- struct kfifo *rx_kfifo;
+ struct kfifo rx_kfifo;
spinlock_t rx_kfifo_lock;
struct v4l2_subdev_ir_parameters tx_params;
struct mutex tx_params_lock;
atomic_t txclk_divider;
-
- struct kfifo *tx_kfifo;
- spinlock_t tx_kfifo_lock;
};
static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd)
@@ -594,8 +591,9 @@ static int cx23888_ir_irq_handler(struct
if (i == 0)
break;
j = i * sizeof(u32);
- k = kfifo_put(state->rx_kfifo,
- (unsigned char *) rx_data, j);
+ k = kfifo_in_locked(&state->rx_kfifo,
+ (unsigned char *) rx_data, j,
+ &state->rx_kfifo_lock);
if (k != j)
kror++; /* rx_kfifo over run */
}
@@ -631,7 +629,7 @@ static int cx23888_ir_irq_handler(struct
cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl);
*handled = true;
}
- if (kfifo_len(state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2)
+ if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2)
events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
if (events)
@@ -657,7 +655,7 @@ static int cx23888_ir_rx_read(struct v4l
return 0;
}
- n = kfifo_get(state->rx_kfifo, buf, n);
+ n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
n /= sizeof(u32);
*num = n * sizeof(u32);
@@ -785,7 +783,7 @@ static int cx23888_ir_rx_s_parameters(st
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
if (p->enable) {
- kfifo_reset(state->rx_kfifo);
+ kfifo_reset(&state->rx_kfifo);
if (p->interrupt_enable)
irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
control_rx_enable(dev, p->enable);
@@ -892,7 +890,6 @@ static int cx23888_ir_tx_s_parameters(st
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
if (p->enable) {
- kfifo_reset(state->tx_kfifo);
if (p->interrupt_enable)
irqenable_tx(dev, IRQEN_TSE);
control_tx_enable(dev, p->enable);
@@ -1168,19 +1165,9 @@ int cx23888_ir_probe(struct cx23885_dev
return -ENOMEM;
spin_lock_init(&state->rx_kfifo_lock);
- state->rx_kfifo = kfifo_alloc(CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL,
- &state->rx_kfifo_lock);
- if (state->rx_kfifo == NULL)
+ if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL))
return -ENOMEM;
- spin_lock_init(&state->tx_kfifo_lock);
- state->tx_kfifo = kfifo_alloc(CX23888_IR_TX_KFIFO_SIZE, GFP_KERNEL,
- &state->tx_kfifo_lock);
- if (state->tx_kfifo == NULL) {
- kfifo_free(state->rx_kfifo);
- return -ENOMEM;
- }
-
state->dev = dev;
state->id = V4L2_IDENT_CX23888_IR;
state->rev = 0;
@@ -1211,8 +1198,7 @@ int cx23888_ir_probe(struct cx23885_dev
sizeof(struct v4l2_subdev_ir_parameters));
v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
} else {
- kfifo_free(state->rx_kfifo);
- kfifo_free(state->tx_kfifo);
+ kfifo_free(&state->rx_kfifo);
}
return ret;
}
@@ -1231,8 +1217,7 @@ int cx23888_ir_remove(struct cx23885_dev
state = to_state(sd);
v4l2_device_unregister_subdev(sd);
- kfifo_free(state->rx_kfifo);
- kfifo_free(state->tx_kfifo);
+ kfifo_free(&state->rx_kfifo);
kfree(state);
/* Nothing more to free() as state held the actual v4l2_subdev object */
return 0;
reply other threads:[~2009-12-18 8:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1261123954.13116.4.camel@wall-e \
--to=stefani@seibold.net \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.