All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Suresh Siddha <suresh.b.siddha@intel.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	"ananth@in.ibm.com" <ananth@in.ibm.com>,
	Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: 
Date: Mon, 11 Jan 2010 18:45:57 -0800	[thread overview]
Message-ID: <1263264358-3896-3-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1263264358-3896-1-git-send-email-yinghai@kernel.org>

should use nr_cpu_ids instead of num_processor, in case we have hotplug cpus.

if current only have 8 cpus is up, but if we will have more cpus that
will be hot added later, we should use physical flat at first.

nr_cpu_ids is the total cpus that could be supported.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/apic/probe_32.c |   20 ++++++++++++++++++--
 arch/x86/kernel/apic/probe_64.c |    3 ++-
 arch/x86/kernel/smpboot.c       |    2 --
 3 files changed, 20 insertions(+), 5 deletions(-)

Index: linux-2.6/arch/x86/kernel/apic/probe_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/probe_32.c
+++ linux-2.6/arch/x86/kernel/apic/probe_32.c
@@ -52,7 +52,7 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-void default_setup_apic_routing(void)
+static void local_default_setup_apic_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
 	printk(KERN_INFO
@@ -103,7 +103,7 @@ struct apic apic_default = {
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
+	.setup_apic_routing		= local_default_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
@@ -207,6 +207,22 @@ void __init generic_bigsmp_probe(void)
 			apic = &apic_bigsmp;
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
 			       apic->name);
+		}
+	}
+#endif
+}
+
+void default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_BIGSMP
+	/*
+	 * make sure we go to bigsmp according to real nr_cpu_ids
+	 */
+	if (!cmdline_apic && apic == &apic_default) {
+		if (nr_cpu_ids > 8) {
+			apic = &apic_bigsmp;
+			printk(KERN_INFO "Overriding APIC driver with %s\n",
+			       apic->name);
 		}
 	}
 #endif
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -1084,9 +1084,7 @@ void __init native_smp_prepare_cpus(unsi
 	set_cpu_sibling_map(0);
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
Index: linux-2.6/arch/x86/kernel/apic/probe_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/probe_64.c
+++ linux-2.6/arch/x86/kernel/apic/probe_64.c
@@ -67,7 +67,8 @@ void __init default_setup_apic_routing(v
 	}
 #endif
 
-	if (apic == &apic_flat && num_processors > 8)
+	/* not just num_processors, we could have hotplug cpus */
+	if (apic == &apic_flat && nr_cpu_ids > 8)
 		apic = &apic_physflat;
 
 	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);

  parent reply	other threads:[~2010-01-12  2:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-12  2:45 Yinghai Lu
2010-01-12  2:45 ` Yinghai Lu
2010-01-12  2:45 ` Yinghai Lu [this message]
2010-01-12  2:45 ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1263264358-3896-3-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=ananth@in.ibm.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=suresh.b.siddha@intel.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.