All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Andrzej Siewior <linuxppc-dev@ml.breakpoint.cc>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: [PATCH 4/5] powerpc/fsl head: move the entry setup code into a seperate file
Date: Fri, 15 Jan 2010 17:41:36 +0100	[thread overview]
Message-ID: <1263573697-17839-5-git-send-email-linuxppc-dev@ml.breakpoint.cc> (raw)
In-Reply-To: <1263573697-17839-1-git-send-email-linuxppc-dev@ml.breakpoint.cc>

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

This patch moves only the initial entry code which setups the mapping
from what ever to KERNELBASE into a seperate file. No code change has
been made here.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/powerpc/kernel/fsl_booke_entry_mapping.S |  189 +++++++++++++++++++++++++
 arch/powerpc/kernel/head_fsl_booke.S          |  189 +------------------------
 2 files changed, 190 insertions(+), 188 deletions(-)
 create mode 100644 arch/powerpc/kernel/fsl_booke_entry_mapping.S

diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
new file mode 100644
index 0000000..d629618
--- /dev/null
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -0,0 +1,189 @@
+/* 1. Find the index of the entry we're executing in */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7, SPRN_PID0
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	match_TLB			/* skip if NPIDS != 3 */
+
+	mfspr	r7,SPRN_PID1
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7, SPRN_PID2
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* Fall through, we had to match */
+
+match_TLB:
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+	mfspr	r9,SPRN_TLB1CFG
+	andi.	r9,r9,0xfff
+	li	r6,0				/* Set Entry counter to 0 */
+1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r3,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r9				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate TLB0 */
+	li	r6,0x04
+	tlbivax 0,r6
+	TLBSYNC
+	/* Invalidate TLB1 */
+	li	r6,0x0c
+	tlbivax 0,r6
+	TLBSYNC
+
+/* 3. Setup a temp mapping and jump to it */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+
+	/* grab and fixup the RPN */
+	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
+	rlwinm	r6,r6,25,27,31
+	li	r8,-1
+	addi	r6,r6,10
+	slw	r6,r8,r6	/* convert to mask */
+
+	bl	1f		/* Find our address */
+1:	mflr	r7
+
+	mfspr	r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r23,SPRN_MAS7
+#endif
+	and	r8,r6,r8
+	subfic	r9,r6,-4096
+	and	r9,r9,r7
+
+	or	r25,r8,r9
+	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+	/* Just modify the entry ID and EPN for the temp mapping */
+	li	r7, 0		/* Set MAS0(TLBSEL) = 0 | ESEL(0) */
+	mtspr	SPRN_MAS0,r7
+	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
+	slwi	r6,r6,12
+	oris	r6,r6,(MAS1_VALID)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS2
+	li	r7,0		/* temp EPN = 0 */
+	rlwimi	r7,r6,0,20,31
+	mtspr	SPRN_MAS2,r7
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+	xori	r6,r4,1
+	slwi	r6,r6,5		/* setup new context with other address space */
+	bl	1f		/* Find our address */
+1:	mflr	r9
+	rlwimi	r7,r9,0,20,31
+	addi	r7,r7,(2f - 1b)
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r6
+	rfi
+2:
+/* 4. Clear out PIDs & Search info */
+	li	r6,0
+	mtspr   SPRN_MAS6,r6
+	mtspr	SPRN_PID0,r6
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	2f				/* skip if NPIDS != 3 */
+
+	mtspr	SPRN_PID1,r6
+	mtspr	SPRN_PID2,r6
+
+/* 5. Invalidate mapping we started in */
+2:
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r6,SPRN_MAS1
+	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP	MAS2_M
+#else
+#define M_IF_SMP	0
+#endif
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+	mtspr	SPRN_MAS0,r6
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
+	mtspr	SPRN_MAS1,r6
+	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
+	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
+	mtspr	SPRN_MAS2,r6
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+	lis	r6,(KERNELBASE & ~0xfff)@h
+	ori	r6,r6,(KERNELBASE & ~0xfff)@l
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	bl	1f			/* Find our address */
+1:	mflr	r9
+	rlwimi	r6,r9,0,20,31
+	addi	r6,r6,(2f - 1b)
+	add	r6, r6, r25
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+2:
+	/* Invalidate TLB0 */
+	li	r9,0x04
+	tlbivax 0,r9
+	TLBSYNC
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 445eddd..4de9bc5 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -94,195 +94,8 @@ _ENTRY(_start);
  */
 
 _ENTRY(__early_start)
-/* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
-invstr:	mflr	r6				/* Make it accessible */
-	mfmsr	r7
-	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
-	mfspr	r7, SPRN_PID0
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	match_TLB			/* skip if NPIDS != 3 */
-
-	mfspr	r7,SPRN_PID1
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-	mfspr	r7, SPRN_PID2
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* Fall through, we had to match */
-
-match_TLB:
-	mfspr	r7,SPRN_MAS0
-	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
-
-	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
-	oris	r7,r7,MAS1_IPROT@h
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-
-/* 2. Invalidate all entries except the entry we're executing in */
-	mfspr	r9,SPRN_TLB1CFG
-	andi.	r9,r9,0xfff
-	li	r6,0				/* Set Entry counter to 0 */
-1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r7,SPRN_MAS1
-	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
-	cmpw	r3,r6
-	beq	skpinv				/* Dont update the current execution TLB */
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-	isync
-skpinv:	addi	r6,r6,1				/* Increment */
-	cmpw	r6,r9				/* Are we done? */
-	bne	1b				/* If not, repeat */
-
-	/* Invalidate TLB0 */
-	li	r6,0x04
-	tlbivax 0,r6
-	TLBSYNC
-	/* Invalidate TLB1 */
-	li	r6,0x0c
-	tlbivax 0,r6
-	TLBSYNC
-
-/* 3. Setup a temp mapping and jump to it */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-
-	/* grab and fixup the RPN */
-	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
-	rlwinm	r6,r6,25,27,31
-	li	r8,-1
-	addi	r6,r6,10
-	slw	r6,r8,r6	/* convert to mask */
-
-	bl	1f		/* Find our address */
-1:	mflr	r7
-
-	mfspr	r8,SPRN_MAS3
-#ifdef CONFIG_PHYS_64BIT
-	mfspr	r23,SPRN_MAS7
-#endif
-	and	r8,r6,r8
-	subfic	r9,r6,-4096
-	and	r9,r9,r7
-
-	or	r25,r8,r9
-	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
-
-	/* Just modify the entry ID and EPN for the temp mapping */
-	li	r7, 0		/* Set MAS0(TLBSEL) = 0 | ESEL(0) */
-	mtspr	SPRN_MAS0,r7
-	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
-	slwi	r6,r6,12
-	oris	r6,r6,(MAS1_VALID)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
-	mtspr	SPRN_MAS1,r6
-	mfspr	r6,SPRN_MAS2
-	li	r7,0		/* temp EPN = 0 */
-	rlwimi	r7,r6,0,20,31
-	mtspr	SPRN_MAS2,r7
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-	xori	r6,r4,1
-	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
-1:	mflr	r9
-	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,(2f - 1b)
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r6
-	rfi
-2:
-/* 4. Clear out PIDs & Search info */
-	li	r6,0
-	mtspr   SPRN_MAS6,r6
-	mtspr	SPRN_PID0,r6
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	2f				/* skip if NPIDS != 3 */
 
-	mtspr	SPRN_PID1,r6
-	mtspr	SPRN_PID2,r6
-
-/* 5. Invalidate mapping we started in */
-2:
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r6,SPRN_MAS1
-	rlwinm	r6,r6,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r6
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
-
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP	MAS2_M
-#else
-#define M_IF_SMP	0
-#endif
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
-	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
-	mtspr	SPRN_MAS0,r6
-	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
-	mtspr	SPRN_MAS1,r6
-	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
-	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
-	mtspr	SPRN_MAS2,r6
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
-	lis	r6,(KERNELBASE & ~0xfff)@h
-	ori	r6,r6,(KERNELBASE & ~0xfff)@l
-	lis	r7,MSR_KERNEL@h
-	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
-1:	mflr	r9
-	rlwimi	r6,r9,0,20,31
-	addi	r6,r6,(2f - 1b)
-	add	r6, r6, r25
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r7
-	rfi				/* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
-2:
-	/* Invalidate TLB0 */
-	li	r9,0x04
-	tlbivax 0,r9
-	TLBSYNC
+#include "fsl_booke_entry_mapping.S"
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
-- 
1.6.2.5

  parent reply	other threads:[~2010-01-15 17:11 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-15 16:41 Kexec support for FSL-BookE, take two Sebastian Andrzej Siewior
2010-01-15 16:41 ` [PATCH 1/5] powerpc/head fsl: fix the case where we are not in the first page Sebastian Andrzej Siewior
2010-02-18  3:07   ` Kumar Gala
2010-02-18  8:53     ` Sebastian Andrzej Siewior
2010-01-15 16:41 ` [PATCH 2/5] powerpc/head fsl: move the temp 4KiB mapping to TLB0 Sebastian Andrzej Siewior
2010-02-18  3:09   ` Kumar Gala
2010-02-18  9:08     ` Sebastian Andrzej Siewior
2010-01-15 16:41 ` [PATCH 3/5] powerpc/head fsl: replace a hardcoded constant Sebastian Andrzej Siewior
2010-02-18  3:11   ` Kumar Gala
2010-01-15 16:41 ` Sebastian Andrzej Siewior [this message]
2010-01-15 16:41 ` [PATCH 5/5] powerpc/kexec: Add support for FSL-BookE Sebastian Andrzej Siewior
2010-01-15 17:53 ` Kexec support for FSL-BookE, take two Kumar Gala
2010-01-15 19:23   ` Sebastian Andrzej Siewior
2010-02-08 14:09   ` Sebastian Andrzej Siewior
2010-01-16 12:35 ` wilbur.chan
2010-01-16 12:52   ` Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1263573697-17839-5-git-send-email-linuxppc-dev@ml.breakpoint.cc \
    --to=linuxppc-dev@ml.breakpoint.cc \
    --cc=bigeasy@linutronix.de \
    --cc=galak@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.