From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, axboe@kernel.dk,
rusty@rustcorp.com.au, akpm@linux-foundation.org,
ebiederm@xmission.com, tytso@mit.edu, Trond.Myklebust@netapp.com,
aelder@sgi.com, hch@infradead.org, viro@zeniv.linux.org.uk,
davem@davemloft.net, netdev@vger.kernel.org, x86@kernel.org,
mingo@redhat.com, fweisbec@gmail.com, dan.j.williams@intel.com,
borislav.petkov@amd.com, ying.huang@intel.com, lenb@kernel.org,
neilb@suse.de, cl@linux-foundation.org
Cc: Tejun Heo <tj@kernel.org>, Eric Dumazet <eric.dumazet@gmail.com>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 4/8] percpu: add __percpu sparse annotations to net drivers
Date: Tue, 26 Jan 2010 00:22:11 +0900 [thread overview]
Message-ID: <1264432935-10453-5-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1264432935-10453-1-git-send-email-tj@kernel.org>
Add __percpu sparse annotations to net drivers.
These annotations are to make sparse consider percpu variables to be
in a different address space and warn if accessed without going
through percpu accessors. This patch doesn't affect normal builds.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/chelsio/sge.c | 2 +-
drivers/net/loopback.c | 16 +++++++++-------
drivers/net/macvlan.c | 2 +-
drivers/net/veth.c | 4 ++--
4 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 109d278..8e12505 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -267,7 +267,7 @@ struct sge {
struct sk_buff *espibug_skb[MAX_NPORTS];
u32 sge_control; /* shadow value of sge control reg */
struct sge_intr_counts stats;
- struct sge_port_stats *port_stats[MAX_NPORTS];
+ struct sge_port_stats __percpu *port_stats[MAX_NPORTS];
struct sched *tx_sched;
struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp;
};
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index b9fcc98..72b7949 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -72,7 +72,8 @@ struct pcpu_lstats {
static netdev_tx_t loopback_xmit(struct sk_buff *skb,
struct net_device *dev)
{
- struct pcpu_lstats *pcpu_lstats, *lb_stats;
+ struct pcpu_lstats __percpu *pcpu_lstats;
+ struct pcpu_lstats *lb_stats;
int len;
skb_orphan(skb);
@@ -80,7 +81,7 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb,
skb->protocol = eth_type_trans(skb, dev);
/* it's OK to use per_cpu_ptr() because BHs are off */
- pcpu_lstats = dev->ml_priv;
+ pcpu_lstats = (void __percpu __force *)dev->ml_priv;
lb_stats = this_cpu_ptr(pcpu_lstats);
len = skb->len;
@@ -95,14 +96,14 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb,
static struct net_device_stats *loopback_get_stats(struct net_device *dev)
{
- const struct pcpu_lstats *pcpu_lstats;
+ const struct pcpu_lstats __percpu *pcpu_lstats;
struct net_device_stats *stats = &dev->stats;
unsigned long bytes = 0;
unsigned long packets = 0;
unsigned long drops = 0;
int i;
- pcpu_lstats = dev->ml_priv;
+ pcpu_lstats = (void __percpu __force *)dev->ml_priv;
for_each_possible_cpu(i) {
const struct pcpu_lstats *lb_stats;
@@ -135,19 +136,20 @@ static const struct ethtool_ops loopback_ethtool_ops = {
static int loopback_dev_init(struct net_device *dev)
{
- struct pcpu_lstats *lstats;
+ struct pcpu_lstats __percpu *lstats;
lstats = alloc_percpu(struct pcpu_lstats);
if (!lstats)
return -ENOMEM;
- dev->ml_priv = lstats;
+ dev->ml_priv = (void __force *)lstats;
return 0;
}
static void loopback_dev_free(struct net_device *dev)
{
- struct pcpu_lstats *lstats = dev->ml_priv;
+ struct pcpu_lstats __percpu *lstats =
+ (void __percpu __force *)dev->ml_priv;
free_percpu(lstats);
free_netdev(dev);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 21a9c9a..4d2040c 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -59,7 +59,7 @@ struct macvlan_dev {
struct hlist_node hlist;
struct macvlan_port *port;
struct net_device *lowerdev;
- struct macvlan_rx_stats *rx_stats;
+ struct macvlan_rx_stats __percpu *rx_stats;
enum macvlan_mode mode;
};
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 3a15de5..35609e6 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -34,7 +34,7 @@ struct veth_net_stats {
struct veth_priv {
struct net_device *peer;
- struct veth_net_stats *stats;
+ struct veth_net_stats __percpu *stats;
unsigned ip_summed;
};
@@ -263,7 +263,7 @@ static int veth_change_mtu(struct net_device *dev, int new_mtu)
static int veth_dev_init(struct net_device *dev)
{
- struct veth_net_stats *stats;
+ struct veth_net_stats __percpu *stats;
struct veth_priv *priv;
stats = alloc_percpu(struct veth_net_stats);
--
1.6.4.2
next prev parent reply other threads:[~2010-01-25 15:20 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-25 15:22 [PATCHSET] percpu: add __percpu sparse annotations Tejun Heo
2010-01-25 15:22 ` [PATCH 1/8] percpu: add __percpu sparse annotations to core kernel subsystems Tejun Heo
2010-01-25 15:22 ` Tejun Heo
2010-01-25 15:22 ` Tejun Heo
2010-01-25 21:58 ` Christoph Lameter
2010-01-25 21:58 ` Christoph Lameter
2010-01-31 11:42 ` Paul E. McKenney
2010-01-31 11:42 ` Paul E. McKenney
2010-01-25 15:22 ` [PATCH 2/8] percpu: add __percpu sparse annotations to fs Tejun Heo
2010-01-25 15:22 ` Tejun Heo
2010-01-25 15:22 ` [PATCH 3/8] percpu: add __percpu sparse annotations to net Tejun Heo
2010-01-25 15:22 ` Tejun Heo
2010-01-25 21:32 ` David Miller
2010-01-25 15:22 ` Tejun Heo [this message]
2010-01-25 21:33 ` [PATCH 4/8] percpu: add __percpu sparse annotations to net drivers David Miller
2010-01-25 15:22 ` Tejun Heo
2010-01-25 15:22 ` [PATCH 5/8] percpu: add __percpu sparse annotations to x86 Tejun Heo
2010-01-26 1:06 ` H. Peter Anvin
2010-01-26 2:17 ` Tejun Heo
2010-02-01 3:30 ` H. Peter Anvin
2010-01-25 15:22 ` Tejun Heo
2010-01-25 15:22 ` [PATCH 6/8] percpu: add __percpu sparse annotations to trace Tejun Heo
2010-01-25 15:22 ` Tejun Heo
2010-01-25 15:35 ` Steven Rostedt
2010-01-25 15:22 ` [PATCH 7/8] percpu: add __percpu sparse annotations to hw_breakpoint Tejun Heo
2010-01-25 15:22 ` Tejun Heo
2010-01-26 0:19 ` Frederic Weisbecker
2010-01-26 0:48 ` Tejun Heo
2010-01-26 1:02 ` Frederic Weisbecker
2010-01-26 1:19 ` Tejun Heo
2010-01-26 2:01 ` Frederic Weisbecker
2010-01-26 2:10 ` Frederic Weisbecker
2010-01-26 2:13 ` Tejun Heo
2010-01-26 2:18 ` Frederic Weisbecker
2010-01-26 2:22 ` Frederic Weisbecker
2010-01-26 2:34 ` Tejun Heo
2010-01-26 2:35 ` Frederic Weisbecker
2010-01-26 2:47 ` Tejun Heo
2010-01-26 1:02 ` H. Peter Anvin
2010-01-26 2:06 ` Tejun Heo
2010-01-26 2:04 ` Al Viro
2010-01-26 2:16 ` Tejun Heo
2010-01-26 2:32 ` Al Viro
2010-01-26 2:43 ` Tejun Heo
2010-01-26 2:48 ` Al Viro
2010-01-26 3:10 ` Tejun Heo
2010-01-26 3:56 ` Al Viro
2010-01-26 1:06 ` H. Peter Anvin
2010-01-26 1:12 ` Frederic Weisbecker
2010-01-26 2:10 ` Tejun Heo
2010-01-25 15:22 ` [PATCH 8/8] percpu: add __percpu sparse annotations to what's left Tejun Heo
2010-01-25 15:54 ` Borislav Petkov
2010-01-25 15:22 ` Tejun Heo
2010-01-25 23:14 ` [PATCHSET] percpu: add __percpu sparse annotations Al Viro
2010-01-26 0:30 ` Tejun Heo
2010-02-02 5:37 ` Tejun Heo
2010-02-02 5:37 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264432935-10453-5-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=Trond.Myklebust@netapp.com \
--cc=aelder@sgi.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=axboe@kernel.dk \
--cc=borislav.petkov@amd.com \
--cc=cl@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=eric.dumazet@gmail.com \
--cc=fweisbec@gmail.com \
--cc=hch@infradead.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=neilb@suse.de \
--cc=netdev@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
--cc=tytso@mit.edu \
--cc=viro@zeniv.linux.org.uk \
--cc=x86@kernel.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.