From: "Alan D. Brunelle" <Alan.Brunelle@hp.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: jens.axboe@oracle.com, whalajam@yahoo.com
Subject: Added in stricter no merge semantics for block I/O
Date: Tue, 26 Jan 2010 10:14:44 -0500 [thread overview]
Message-ID: <1264518884.3278.15.camel@cail> (raw)
Added in stricter no merge semantics for block I/O
Updated 'nomerges' tunable to accept a value of '2' - indicating that _no_
merges at all are to be attempted (not even the simple one-hit cache).
The following table illustrates the additional benefit - 5 minute runs of
a random I/O load were applied to a dozen devices on a 16-way x86_64 system.
nomerges Throughput %System Improvement (tput / %sys)
-------- ------------ ----------- -------------------------
0 12.45 MB/sec 0.669365609
1 12.50 MB/sec 0.641519199 0.40% / 2.71%
2 12.52 MB/sec 0.639849750 0.56% / 2.96%
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Cc: jens.axboe@oracle.com
---
Documentation/ABI/testing/sysfs-block | 14 ++++++++++++++
Documentation/block/queue-sysfs.txt | 10 +++++-----
block/blk-sysfs.c | 11 +++++++----
block/elevator.c | 11 ++++++++++-
include/linux/blkdev.h | 3 +++
5 files changed, 39 insertions(+), 10 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index d2f9033..954624f 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -128,3 +128,17 @@ Description:
preferred request size for workloads where sustained
throughput is desired. If no optimal I/O size is
reported this file contains 0.
+
+What: /sys/block/<disk>/queue/nomerges
+Date: January 2010
+Contact:
+Description:
+ Standard I/O elevator operations include attempts to
+ merge contiguous I/Os. For known random I/O loads these
+ attempts will always fail and result in extra cycles
+ being spent in the kernel. This allows one to turn off
+ this behavior on one of two ways: When set to 1, complex
+ merge checks are disabled, but the simple one-shot merges
+ with the previous I/O request are enabled. When set to 2,
+ all merge tries are disabled. The default value is 0 -
+ which enables all types of merge tries.
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index e164403..f652740 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -25,11 +25,11 @@ size allowed by the hardware.
nomerges (RW)
-------------
-This enables the user to disable the lookup logic involved with IO merging
-requests in the block layer. Merging may still occur through a direct
-1-hit cache, since that comes for (almost) free. The IO scheduler will not
-waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults
-to 0, enabling all merges.
+This enables the user to disable the lookup logic involved with IO
+merging requests in the block layer. By default (0) all merges are
+enabled. When set to 1 only simple one-hit merges will be tried. When
+set to 2 no merge algorithms will be tried (including one-hit or more
+complex tree/hash lookups).
nr_requests (RW)
----------------
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 8606c95..e854424 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -189,7 +189,8 @@ static ssize_t queue_nonrot_store(struct request_queue *q, const char *page,
static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
{
- return queue_var_show(blk_queue_nomerges(q), page);
+ return queue_var_show((blk_queue_nomerges(q) << 1) |
+ blk_queue_noxmerges(q), page);
}
static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
@@ -199,10 +200,12 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
ssize_t ret = queue_var_store(&nm, page, count);
spin_lock_irq(q->queue_lock);
- if (nm)
+ queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+ queue_flag_clear(QUEUE_FLAG_NOXMERGES, q);
+ if (nm == 2)
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
- else
- queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+ else if (nm)
+ queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
spin_unlock_irq(q->queue_lock);
return ret;
diff --git a/block/elevator.c b/block/elevator.c
index 9ad5ccc..ee3a883 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -474,6 +474,15 @@ int elv_merge(struct request_queue *q, struct request **req, struct bio *bio)
int ret;
/*
+ * Levels of merges:
+ * nomerges: No merges at all attempted
+ * noxmerges: Only simple one-hit cache try
+ * merges: All merge tries attempted
+ */
+ if (blk_queue_nomerges(q))
+ return ELEVATOR_NO_MERGE;
+
+ /*
* First try one-hit cache.
*/
if (q->last_merge) {
@@ -484,7 +493,7 @@ int elv_merge(struct request_queue *q, struct request **req, struct bio *bio)
}
}
- if (blk_queue_nomerges(q))
+ if (blk_queue_noxmerges(q))
return ELEVATOR_NO_MERGE;
/*
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ffb13ad..f71f5c5 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -463,6 +463,7 @@ struct request_queue
#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */
#define QUEUE_FLAG_CQ 16 /* hardware does queuing */
#define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */
+#define QUEUE_FLAG_NOXMERGES 18 /* No extended merges */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_CLUSTER) | \
@@ -589,6 +590,8 @@ enum {
#define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags)
#define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
#define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
+#define blk_queue_noxmerges(q) \
+ test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
#define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
#define blk_queue_flushing(q) ((q)->ordseq)
--
1.6.5
next reply other threads:[~2010-01-26 15:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-26 15:14 Alan D. Brunelle [this message]
2010-01-29 8:02 ` Added in stricter no merge semantics for block I/O Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264518884.3278.15.camel@cail \
--to=alan.brunelle@hp.com \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=whalajam@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.