[PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles

All of lore.kernel.org
 help / color / mirror / Atom feed

From: wellsk40@gmail.com (Kevin Wells)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles
Date: Tue, 26 Jan 2010 16:19:42 -0800	[thread overview]
Message-ID: <1264551582.6528.5@usb10132> (raw)

LPC32xx architecture Kconfig, platform Kconfig, and makefiles


Signed-off-by: Kevin Wells <kevin.wells@nxp.com>
---
  arch/arm/mach-lpc32xx/Kconfig       |  158  
+++++++++++++++++++++++++++++++++++
  arch/arm/mach-lpc32xx/Kconfig.plat  |   98 ++++++++++++++++++++++
  arch/arm/mach-lpc32xx/Makefile      |    9 ++
  arch/arm/mach-lpc32xx/Makefile.boot |    4 +
  4 files changed, 269 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-lpc32xx/Kconfig  
b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 0000000..a277885
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,158 @@
+if ARCH_LPC32XX
+
+menu "LPC32XX chip options"
+
+config ARCH_LPC32XX_IRAM_SIZE
+	int
+	default 131072 if ARCH_LPC32XX_20
+	default 262144 if ARCH_LPC32XX_30 || ARCH_LPC32XX_40 ||  
ARCH_LPC32XX_50
+
+choice
+    prompt "Select 32x0 device variation"
+    default ARCH_LPC32XX_50
+
+	config ARCH_LPC32XX_20
+		bool "LPC3220"
+		help
+		 128K IRAM, no ethernet or LCD
+
+	config ARCH_LPC32XX_30
+		bool "LPC3230"
+		help
+		 256K IRAM and LCD, no ethernet
+
+	config ARCH_LPC32XX_40
+		bool "LPC3240"
+		help
+		 256K IRAM and ethernet, no LCD
+
+	config ARCH_LPC32XX_50
+		bool "LPC3250"
+		help
+		 256K IRAM and ethernet and LCD
+
+endchoice
+
+menu "Serial port configuration"
+
+menu "Individual UART enable selections"
+
+config ARCH_LPC32XX_HSUART1_ENABLE
+	bool "Enable high speed UART1"
+	help
+	 Also enable LPC32xx high speed serial support in drivers/serial
+
+config ARCH_LPC32XX_HSUART2_ENABLE
+	bool "Enable high speed UART2"
+	help
+	 Also enable LPC32xx high speed serial support in drivers/serial
+
+config ARCH_LPC32XX_UART3_ENABLE
+	bool "Enable standard UART3"
+	help
+	 Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_UART4_ENABLE
+	bool "Enable standard UART4"
+	help
+	 Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_UART5_ENABLE
+	bool "Enable standard UART5"
+	default y
+	help
+	 Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_UART6_ENABLE
+	bool "Enable standard UART6"
+	help
+	 Also enable 8250 serial support in drivers/serial
+
+config ARCH_LPC32XX_HSUART7_ENABLE
+	bool "Enable high speed UART7"
+	help
+	 Also enable LPC32xx high speed serial support in drivers/serial
+
+endmenu
+
+config ARCH_LPC32XX_UART6_IRDAMODE
+	bool "Use IRDA mode on UART6"
+	depends on ARCH_LPC32XX_UART6_ENABLE
+	help
+		Enables the IrDA modulator for UART6
+
+choice
+	prompt "Kernel uncompress status output UART selection"
+	default ARCH_LPC32XX_UNCOMP_U5
+
+	config ARCH_LPC32XX_UNCOMP_HSU1
+		bool "High speed UART 1"
+		help
+		 Kernel uncompress output is on high speed UART 1
+
+	config ARCH_LPC32XX_UNCOMP_HSU2
+		bool "High speed UART 2"
+		help
+		 Kernel uncompress output is on high speed UART 2
+
+	config ARCH_LPC32XX_UNCOMP_U3
+		bool "Standard UART 3"
+		help
+		 Kernel uncompress output is on standard UART 3
+
+	config ARCH_LPC32XX_UNCOMP_U4
+		bool "Standard UART 4"
+		help
+		 Kernel uncompress output is on standard UART 4
+
+	config ARCH_LPC32XX_UNCOMP_U5
+		bool "Standard UART 5"
+		help
+		 Kernel uncompress output is on standard UART 5
+
+	config ARCH_LPC32XX_UNCOMP_U6
+		bool "Standard UART 6"
+		help
+		 Kernel uncompress output is on standard UART 6
+
+	config ARCH_LPC32XX_UNCOMP_HSU7
+		bool "High speed UART 7"
+		help
+		 Kernel uncompress output is on high speed UART 7
+
+endchoice
+
+choice
+	prompt "debug output (printascii) UART selection"
+	default ARCH_LPC32XX_DEBUGO_U5
+
+	config ARCH_LPC32XX_DEBUGO_U3
+		bool "Standard UART 3"
+		help
+		 printascii messages are output on standard UART 3
+
+	config ARCH_LPC32XX_DEBUGO_U4
+		bool "Standard UART 4"
+		help
+		 printascii messages are output on standard UART 4
+
+	config ARCH_LPC32XX_DEBUGO_U5
+		bool "Standard UART 5"
+		help
+		 printascii messages are output on standard UART 5
+
+	config ARCH_LPC32XX_DEBUGO_U6
+		bool "Standard UART 6"
+		help
+		 printascii messages are output on standard UART 6
+
+endchoice
+
+endmenu
+
+endmenu
+
+source "arch/arm/mach-lpc32xx/Kconfig.plat"
+
+endif
+
diff --git a/arch/arm/mach-lpc32xx/Kconfig.plat  
b/arch/arm/mach-lpc32xx/Kconfig.plat
new file mode 100644
index 0000000..a67d1ad
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig.plat
@@ -0,0 +1,98 @@
+menu "LPC32XX platform choices"
+
+choice
+    prompt "Choose your board"
+    default MACH_PHY3250
+    help
+        This menu selects the LPC3250 board to support for this build
+
+    config MACH_PHY3250
+        bool "Phytec 3250 development board"
+	help
+	    Support for the Phytec 3250 development board
+
+endchoice
+
+choice
+	prompt "Phytec LCD module revisions"
+	depends on MACH_PHY3250
+	default PHY3250_QVGA_PANEL_1307_1
+	help
+	  Select one of the supported LCD panel revisions
+
+config PHY3250_QVGA_PANEL_1307_0
+	bool "1307.0 QVGA panel (portrait mode RGB565)"
+	help
+	  Use LCD module version 1307.0
+
+config PHY3250_QVGA_PANEL_1307_1
+	bool "1307.1 QVGA panel (portrait mode RGB565)"
+	help
+	  Use LCD module version 1307.1
+
+endchoice
+
+choice
+	prompt "Phytec CPU module revisions"
+	depends on MACH_PHY3250
+	default PHY3250_CPU_MODULE_1304_1
+	help
+	  Select one of the supported CPU module revisions
+
+config PHY3250_CPU_MODULE_1304_0
+	bool "1304.0 CPU module"
+	help
+	  Use CPU module version 1304.0
+
+config PHY3250_CPU_MODULE_1304_1
+	bool "1304.1 CPU module"
+	help
+	  Use CPU module version 1304.1
+
+endchoice
+
+choice
+	prompt "Phytec Carrier board revisions"
+	depends on MACH_PHY3250
+	default PHY3250_CARRIER_1305_3
+	help
+	  Select one of the supported carrier board revisions
+
+config PHY3250_CARRIER_1305_01
+	bool "1305.0 or 1305.1 carrier board"
+	help
+	  Use carrier board version 1305.0 or 1305.1
+
+config PHY3250_CARRIER_1305_2
+	bool "1305.2 carrier board"
+	help
+	  Use carrier board version 1305.2
+
+config PHY3250_CARRIER_1305_3
+	bool "1305.3 carrier board"
+	help
+	  Use carrier board version 1305.3
+
+endchoice
+
+choice
+	prompt "Internal IRAM use"
+	default MACH_LPC32XX_IRAM_RESERVED
+	depends on MACH_PHY3250
+
+config MACH_LPC32XX_IRAM_RESERVED
+	bool "IRAM is not used (reserved)"
+	help
+	  IRAM is not used for video or networking and can be used for
+	  other purposes or drivers
+
+config MACH_LPC32XX_IRAM_FOR_CLCD
+	bool "Use IRAM as a video frame buffer"
+	help
+	  IRAM will be used for the LCD frame buffer. If the required  
buffer
+	  size is larger than the size of IRAM, then SDRAM will be used
+	  instead.
+
+endchoice
+
+endmenu
diff --git a/arch/arm/mach-lpc32xx/Makefile  
b/arch/arm/mach-lpc32xx/Makefile
new file mode 100644
index 0000000..9c76c70
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y				:= timer.o irq.o common.o serial.o  
clock.o
+obj-y				+= gpiolib.o pm.o pm_events.o suspend.o
+
+obj-$(CONFIG_MACH_PHY3250)	+= phy3250.o
+
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot  
b/arch/arm/mach-lpc32xx/Makefile.boot
new file mode 100644
index 0000000..b796b41
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x82000000
+
-- 
1.6.6

next             reply	other threads:[~2010-01-27  0:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-27  0:19 Kevin Wells [this message]
2010-01-27  3:42 ` [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles Baruch Siach

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:a277885 dfblob:a67d1ad dfblob:9c76c70 dfblob:b796b41 )
 OR (
bs:"[PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1264551582.6528.5@usb10132 \
    --to=wellsk40@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.