From: Karsten Keil <isdn@linux-pingi.de>
To: Tilman Schmidt <tilman@imap.cc>
Cc: David Miller <davem@davemloft.net>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org,
isdn4linux <isdn4linux@listserv.isdn4linux.de>,
Hansjoerg Lipp <hjlipp@web.de>,
i4ldeveloper <i4ldeveloper@listserv.isdn4linux.de>
Subject: Re: [1/3] gigaset: avoid registering CAPI driver more than once
Date: Mon, 15 Mar 2010 14:48:05 -0000 [thread overview]
Message-ID: <1268664986.25524@pingi> (raw)
Registering/unregistering the Gigaset CAPI driver when a device is
connected/disconnected causes an Oops when disconnecting two Gigaset
devices in a row, because the same capi_driver structure gets
unregistered twice. Fix by making driver registration/unregistration
a separate operation (empty in the ISDN4Linux case) called when the
main module is loaded/unloaded.
Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Acked-by: Karsten Keil <keil@b1-systems.de>
---
Note to -stable: applies correctly to 2.6.33 with fuzz 2 in capi.c.
drivers/isdn/gigaset/capi.c | 44 ++++++++++++++++++++++-----------------
drivers/isdn/gigaset/common.c | 6 +++-
drivers/isdn/gigaset/gigaset.h | 6 +++-
drivers/isdn/gigaset/i4l.c | 28 ++++++++++++++++++-------
4 files changed, 53 insertions(+), 31 deletions(-)
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 6643d65..4a31962 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -2191,36 +2191,24 @@ static const struct file_operations gigaset_proc_fops = {
.release = single_release,
};
-static struct capi_driver capi_driver_gigaset = {
- .name = "gigaset",
- .revision = "1.0",
-};
-
/**
- * gigaset_isdn_register() - register to LL
+ * gigaset_isdn_regdev() - register device to LL
* @cs: device descriptor structure.
* @isdnid: device name.
*
- * Called by main module to register the device with the LL.
- *
* Return value: 1 for success, 0 for failure
*/
-int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
{
struct gigaset_capi_ctr *iif;
int rc;
- pr_info("Kernel CAPI interface\n");
-
iif = kmalloc(sizeof(*iif), GFP_KERNEL);
if (!iif) {
pr_err("%s: out of memory\n", __func__);
return 0;
}
- /* register driver with CAPI (ToDo: what for?) */
- register_capi_driver(&capi_driver_gigaset);
-
/* prepare controller structure */
iif->ctr.owner = THIS_MODULE;
iif->ctr.driverdata = cs;
@@ -2241,7 +2229,6 @@ int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
rc = attach_capi_ctr(&iif->ctr);
if (rc) {
pr_err("attach_capi_ctr failed (%d)\n", rc);
- unregister_capi_driver(&capi_driver_gigaset);
kfree(iif);
return 0;
}
@@ -2252,17 +2239,36 @@ int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
}
/**
- * gigaset_isdn_unregister() - unregister from LL
+ * gigaset_isdn_unregdev() - unregister device from LL
* @cs: device descriptor structure.
- *
- * Called by main module to unregister the device from the LL.
*/
-void gigaset_isdn_unregister(struct cardstate *cs)
+void gigaset_isdn_unregdev(struct cardstate *cs)
{
struct gigaset_capi_ctr *iif = cs->iif;
detach_capi_ctr(&iif->ctr);
kfree(iif);
cs->iif = NULL;
+}
+
+static struct capi_driver capi_driver_gigaset = {
+ .name = "gigaset",
+ .revision = "1.0",
+};
+
+/**
+ * gigaset_isdn_regdrv() - register driver to LL
+ */
+void gigaset_isdn_regdrv(void)
+{
+ pr_info("Kernel CAPI interface\n");
+ register_capi_driver(&capi_driver_gigaset);
+}
+
+/**
+ * gigaset_isdn_unregdrv() - unregister driver from LL
+ */
+void gigaset_isdn_unregdrv(void)
+{
unregister_capi_driver(&capi_driver_gigaset);
}
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 85de339..bdc01cb 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -507,7 +507,7 @@ void gigaset_freecs(struct cardstate *cs)
case 2: /* error in initcshw */
/* Deregister from LL */
make_invalid(cs, VALID_ID);
- gigaset_isdn_unregister(cs);
+ gigaset_isdn_unregdev(cs);
/* fall through */
case 1: /* error when registering to LL */
@@ -769,7 +769,7 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
cs->cmdbytes = 0;
gig_dbg(DEBUG_INIT, "setting up iif");
- if (!gigaset_isdn_register(cs, modulename)) {
+ if (!gigaset_isdn_regdev(cs, modulename)) {
pr_err("error registering ISDN device\n");
goto error;
}
@@ -1205,11 +1205,13 @@ static int __init gigaset_init_module(void)
gigaset_debuglevel = DEBUG_DEFAULT;
pr_info(DRIVER_DESC DRIVER_DESC_DEBUG "\n");
+ gigaset_isdn_regdrv();
return 0;
}
static void __exit gigaset_exit_module(void)
{
+ gigaset_isdn_unregdrv();
}
module_init(gigaset_init_module);
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 1875ab8..cdd144e 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -675,8 +675,10 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
*/
/* Called from common.c for setting up/shutting down with the ISDN subsystem */
-int gigaset_isdn_register(struct cardstate *cs, const char *isdnid);
-void gigaset_isdn_unregister(struct cardstate *cs);
+void gigaset_isdn_regdrv(void);
+void gigaset_isdn_unregdrv(void);
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid);
+void gigaset_isdn_unregdev(struct cardstate *cs);
/* Called from hardware module to indicate completion of an skb */
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index f0acb9d..c22e5ac 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -592,15 +592,13 @@ void gigaset_isdn_stop(struct cardstate *cs)
}
/**
- * gigaset_isdn_register() - register to LL
+ * gigaset_isdn_regdev() - register to LL
* @cs: device descriptor structure.
* @isdnid: device name.
*
- * Called by main module to register the device with the LL.
- *
* Return value: 1 for success, 0 for failure
*/
-int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
{
isdn_if *iif;
@@ -650,15 +648,29 @@ int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
}
/**
- * gigaset_isdn_unregister() - unregister from LL
+ * gigaset_isdn_unregdev() - unregister device from LL
* @cs: device descriptor structure.
- *
- * Called by main module to unregister the device from the LL.
*/
-void gigaset_isdn_unregister(struct cardstate *cs)
+void gigaset_isdn_unregdev(struct cardstate *cs)
{
gig_dbg(DEBUG_CMD, "sending UNLOAD");
gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD);
kfree(cs->iif);
cs->iif = NULL;
}
+
+/**
+ * gigaset_isdn_regdrv() - register driver to LL
+ */
+void gigaset_isdn_regdrv(void)
+{
+ /* nothing to do */
+}
+
+/**
+ * gigaset_isdn_unregdrv() - unregister driver from LL
+ */
+void gigaset_isdn_unregdrv(void)
+{
+ /* nothing to do */
+}
next reply other threads:[~2010-03-15 14:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-15 14:48 Karsten Keil [this message]
2010-03-15 21:20 ` [1/3] gigaset: avoid registering CAPI driver more than once David Miller
2010-03-16 0:23 ` Karsten Keil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1268664986.25524@pingi \
--to=isdn@linux-pingi.de \
--cc=davem@davemloft.net \
--cc=hjlipp@web.de \
--cc=i4ldeveloper@listserv.isdn4linux.de \
--cc=isdn4linux@listserv.isdn4linux.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tilman@imap.cc \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.