From: Gertjan van Wingerde <gwingerde@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: Ivo van Doorn <IvDoorn@gmail.com>,
<linux-wireless@vger.kernel.org>, <users@rt2x00.serialmonkey.com>,
Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver.
Date: Sun, 11 Apr 2010 14:31:11 +0200 [thread overview]
Message-ID: <1270989075-2267-6-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1270989075-2267-1-git-send-email-gwingerde@gmail.com>
Align the rt2800 register initializations with the latest versions of the
Ralink vendor driver.
This patch is also preparation for the addition of support for RT3070 /
RT3071 / RT3090 / RT3390 based devices.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 130 ++++++++++++++++++++++--------
drivers/net/wireless/rt2x00/rt2800pci.c | 13 ---
2 files changed, 95 insertions(+), 48 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 8a4ed76..1890b9a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -359,11 +359,6 @@ static int rt2800_blink_set(struct led_classdev *led_cdev,
rt2800_register_read(led->rt2x00dev, LED_CFG, ®);
rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on);
rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
- rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
- rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
return 0;
@@ -609,10 +604,6 @@ void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp)
{
u32 reg;
- rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
- rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
- rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY,
!!erp->short_preamble);
@@ -631,15 +622,12 @@ void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp)
rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®);
rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
- rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®);
rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
- rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs);
- rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
@@ -984,10 +972,6 @@ static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
libconf->conf->short_frame_max_tx_count);
rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT,
libconf->conf->long_frame_max_tx_count);
- rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
- rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
- rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
- rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
}
@@ -1110,6 +1094,14 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
u32 reg;
unsigned int i;
+ rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+ rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
if (rt2x00_is_usb(rt2x00dev)) {
/*
* Wait until BBP and RF are ready.
@@ -1129,8 +1121,25 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
rt2800_register_write(rt2x00dev, PBF_SYS_CTRL,
reg & ~0x00002000);
- } else if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
+ } else if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) {
+ /*
+ * Reset DMA indexes
+ */
+ rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1);
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1);
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1);
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1);
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1);
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1);
+ rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
+ rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+
+ rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+ rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+ }
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
@@ -1175,6 +1184,13 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ rt2800_config_filter(rt2x00dev, FIF_ALLMULTI);
+
+ rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®);
+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, 9);
+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+ rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
if (rt2x00_is_usb(rt2x00dev) &&
rt2x00_rt_rev(rt2x00dev, RT3070, REV_RT3070E)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
@@ -1198,6 +1214,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32);
rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
@@ -1213,38 +1230,61 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0);
rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+ rt2800_register_read(rt2x00dev, LED_CFG, ®);
+ rt2x00_set_field32(®, LED_CFG_ON_PERIOD, 70);
+ rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, 30);
+ rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
+ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3);
+ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
+ rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
+ rt2800_register_write(rt2x00dev, LED_CFG, reg);
+
rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+ rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®);
+ rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, 15);
+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, 31);
+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+ rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+ rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
+ rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+ rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
+
rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1);
+ rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, 1);
rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0);
rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0);
+ rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, 1);
rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®);
- rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8);
+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 3);
rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0);
rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1);
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0);
rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, 1);
rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
- rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8);
+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 3);
rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0);
rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1);
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0);
rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
- rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, 1);
rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®);
@@ -1257,11 +1297,13 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, 0);
rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®);
rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
- rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL,
+ !rt2x00_is_usb(rt2x00dev));
rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1);
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
@@ -1269,6 +1311,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, 0);
rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®);
@@ -1281,6 +1324,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, 0);
rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®);
@@ -1293,6 +1337,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, 0);
rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
if (rt2x00_is_usb(rt2x00dev)) {
@@ -1322,6 +1367,15 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
+
+ rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®);
+ rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, 32);
+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, 32);
+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+ rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, 314);
+ rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+ rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+
rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
/*
@@ -1471,26 +1525,32 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
rt2800_bbp_write(rt2x00dev, 66, 0x38);
- rt2800_bbp_write(rt2x00dev, 69, 0x12);
+
+ if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
+ rt2800_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800_bbp_write(rt2x00dev, 73, 0x12);
+ } else {
+ rt2800_bbp_write(rt2x00dev, 69, 0x12);
+ rt2800_bbp_write(rt2x00dev, 73, 0x10);
+ }
+
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
- rt2800_bbp_write(rt2x00dev, 73, 0x10);
rt2800_bbp_write(rt2x00dev, 81, 0x37);
rt2800_bbp_write(rt2x00dev, 82, 0x62);
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
- rt2800_bbp_write(rt2x00dev, 84, 0x99);
+
+ if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D) ||
+ rt2x00_rt_rev(rt2x00dev, RT2870, REV_RT2870D))
+ rt2800_bbp_write(rt2x00dev, 84, 0x19);
+ else
+ rt2800_bbp_write(rt2x00dev, 84, 0x99);
+
rt2800_bbp_write(rt2x00dev, 86, 0x00);
rt2800_bbp_write(rt2x00dev, 91, 0x04);
rt2800_bbp_write(rt2x00dev, 92, 0x00);
rt2800_bbp_write(rt2x00dev, 103, 0x00);
rt2800_bbp_write(rt2x00dev, 105, 0x05);
-
- if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
- rt2800_bbp_write(rt2x00dev, 69, 0x16);
- rt2800_bbp_write(rt2x00dev, 73, 0x12);
- }
-
- if (rt2x00_rt_rev_gte(rt2x00dev, RT2860, REV_RT2860D))
- rt2800_bbp_write(rt2x00dev, 84, 0x19);
+ rt2800_bbp_write(rt2x00dev, 106, 0x35);
if (rt2x00_rt(rt2x00dev, RT2872)) {
rt2800_bbp_write(rt2x00dev, 31, 0x08);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index a2b37d3..2131f8f 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -347,19 +347,6 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
struct queue_entry_priv_pci *entry_priv;
u32 reg;
- rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
- rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
-
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
-
/*
* Initialize registers.
*/
--
1.7.0.4
next prev parent reply other threads:[~2010-04-11 12:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-11 12:31 [PATCH v2 0/9] rt2x00: Align with vendor driver and add support for rt3070/rt3071/rt3090/rt3390 Gertjan van Wingerde
2010-04-11 12:31 ` [PATCH 1/9] rt2x00: Let RF chipset decide the RF channel switch method to use in rt2800 Gertjan van Wingerde
2010-04-11 12:31 ` [PATCH 2/9] rt2x00: Update rt2800 register definitions towards latest definitions Gertjan van Wingerde
2010-04-11 12:31 ` [PATCH 3/9] rt2x00: Align RT chipset definitions with vendor driver Gertjan van Wingerde
2010-04-11 12:31 ` [PATCH 4/9] rt2x00: Refactor rt2800 version constants Gertjan van Wingerde
2010-04-11 16:55 ` Ivo van Doorn
2010-04-11 12:31 ` Gertjan van Wingerde [this message]
2010-04-11 16:56 ` [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver Ivo van Doorn
2010-04-11 12:31 ` [PATCH 6/9] rt2x00: Finish rt3070 support in rt2800 register initialization Gertjan van Wingerde
2010-04-11 16:56 ` Ivo van Doorn
2010-04-26 11:02 ` Helmut Schaa
2010-04-26 11:11 ` Helmut Schaa
2010-04-27 11:15 ` Antonio Quartulli
2010-04-28 12:47 ` [rt2x00-users] " Antonio Quartulli
2010-04-28 12:56 ` Helmut Schaa
2010-04-28 17:23 ` Antonio Quartulli
2010-04-30 12:20 ` Helmut Schaa
2010-04-26 11:12 ` Helmut Schaa
2010-04-26 19:52 ` Gertjan van Wingerde
2010-04-26 19:59 ` Helmut Schaa
2010-04-26 21:43 ` Gertjan van Wingerde
2010-04-11 12:31 ` [PATCH 7/9] rt2x00: Add rt3071 " Gertjan van Wingerde
2010-04-11 16:57 ` Ivo van Doorn
2010-04-11 12:31 ` [PATCH 8/9] rt2x00: Add rt3090 " Gertjan van Wingerde
2010-04-11 12:31 ` [PATCH 9/9] rt2x00: Add rt3390 " Gertjan van Wingerde
-- strict thread matches above, loose matches on Subject: below --
2010-04-08 21:50 [PATCH 0/9] rt2x00: Align with vendor driver and add support for rt3070/rt3071/rt3090/rt3390 Gertjan van Wingerde
2010-04-08 21:50 ` [PATCH 5/9] rt2x00: Align rt2800 register initialization with vendor driver Gertjan van Wingerde
2010-04-08 22:33 ` Ivo van Doorn
2010-04-10 19:14 ` Gertjan van Wingerde
2010-04-10 20:58 ` Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1270989075-2267-6-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=IvDoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.