From: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org, ralf@linux-mips.org
Cc: a.p.zijlstra@chello.nl, paulus@samba.org, mingo@elte.hu,
acme@redhat.com, jamie.iles@picochip.com
Subject: [PATCH v2 1/4] MIPS/Oprofile: extracting PMU defines/helper functions for sharing
Date: Fri, 23 Apr 2010 18:36:10 +0800 [thread overview]
Message-ID: <1272018970.4662.93.camel@fun-lab> (raw)
Moving performance counter/control defines/helper functions into a single
header file, so that software using the MIPS PMU can share the code.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
---
arch/mips/include/asm/pmu.h | 244 +++++++++++++++++++++++++++++++
arch/mips/oprofile/op_model_loongson2.c | 23 +---
arch/mips/oprofile/op_model_mipsxx.c | 164 +---------------------
arch/mips/oprofile/op_model_rm9000.c | 16 +--
4 files changed, 247 insertions(+), 200 deletions(-)
create mode 100644 arch/mips/include/asm/pmu.h
diff --git a/arch/mips/include/asm/pmu.h b/arch/mips/include/asm/pmu.h
new file mode 100644
index 0000000..6da943c
--- /dev/null
+++ b/arch/mips/include/asm/pmu.h
@@ -0,0 +1,244 @@
+/*
+ * linux/arch/mips/include/asm/pmu.h
+ *
+ * Copyright (C) 2004, 05, 06 by Ralf Baechle
+ * Copyright (C) 2005 by MIPS Technologies, Inc.
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Yanhua <yanh@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ * Copyright (C) 2010 MIPS Technologies, Inc. Deng-Cheng Zhu
+ *
+ * This file is shared by Oprofile and Perf. It is also shared across the
+ * Oprofile implementation for different MIPS CPUs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MIPS_PMU_H__
+#define __MIPS_PMU_H__
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) || \
+ defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_SB1)
+
+#define M_CONFIG1_PC (1 << 4)
+
+#define M_PERFCTL_EXL (1UL << 0)
+#define M_PERFCTL_KERNEL (1UL << 1)
+#define M_PERFCTL_SUPERVISOR (1UL << 2)
+#define M_PERFCTL_USER (1UL << 3)
+#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
+#define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5)
+#define M_PERFCTL_VPEID(vpe) ((vpe) << 16)
+#define M_PERFCTL_MT_EN(filter) ((filter) << 20)
+#define M_TC_EN_ALL M_PERFCTL_MT_EN(0)
+#define M_TC_EN_VPE M_PERFCTL_MT_EN(1)
+#define M_TC_EN_TC M_PERFCTL_MT_EN(2)
+#define M_PERFCTL_TCID(tcid) ((tcid) << 22)
+#define M_PERFCTL_WIDE (1UL << 30)
+#define M_PERFCTL_MORE (1UL << 31)
+
+#define M_COUNTER_OVERFLOW (1UL << 31)
+
+static int (*save_perf_irq)(void);
+
+#ifdef CONFIG_MIPS_MT_SMP
+static int cpu_has_mipsmt_pertccounters;
+#define WHAT (M_TC_EN_VPE | \
+ M_PERFCTL_VPEID(cpu_data[smp_processor_id()].vpe_id))
+/*
+ * FIXME: For VSMP, vpe_id() is redefined for Perf, because
+ * cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs. WHAT is not
+ * redefined because Perf does not use it.
+ */
+#if defined(CONFIG_HW_PERF_EVENTS)
+#define vpe_id() (cpu_has_mipsmt_pertccounters ? \
+ 0 : smp_processor_id())
+#else
+#define vpe_id() (cpu_has_mipsmt_pertccounters ? \
+ 0 : cpu_data[smp_processor_id()].vpe_id)
+#endif
+/*
+ * The number of bits to shift to convert between counters per core and
+ * counters per VPE. There is no reasonable interface atm to obtain the
+ * number of VPEs used by Linux and in the 34K this number is fixed to two
+ * anyways so we hardcore a few things here for the moment. The way it's
+ * done here will ensure that oprofile VSMP kernel will run right on a lesser
+ * core like a 24K also or with maxcpus=1.
+ */
+static inline unsigned int vpe_shift(void)
+{
+ if (num_possible_cpus() > 1)
+ return 1;
+
+ return 0;
+}
+#else
+#define WHAT 0
+#define vpe_id() 0
+static inline unsigned int vpe_shift(void)
+{
+ return 0;
+}
+#endif
+
+static inline unsigned int
+counters_total_to_per_cpu(unsigned int counters)
+{
+ return counters >> vpe_shift();
+}
+
+static inline unsigned int
+counters_per_cpu_to_total(unsigned int counters)
+{
+ return counters << vpe_shift();
+}
+
+#define __define_perf_accessors(r, n, np) \
+ \
+static inline unsigned int r_c0_ ## r ## n(void) \
+{ \
+ unsigned int cpu = vpe_id(); \
+ \
+ switch (cpu) { \
+ case 0: \
+ return read_c0_ ## r ## n(); \
+ case 1: \
+ return read_c0_ ## r ## np(); \
+ default: \
+ BUG(); \
+ } \
+ return 0; \
+} \
+ \
+static inline void w_c0_ ## r ## n(unsigned int value) \
+{ \
+ unsigned int cpu = vpe_id(); \
+ \
+ switch (cpu) { \
+ case 0: \
+ write_c0_ ## r ## n(value); \
+ return; \
+ case 1: \
+ write_c0_ ## r ## np(value); \
+ return; \
+ default: \
+ BUG(); \
+ } \
+ return; \
+} \
+
+__define_perf_accessors(perfcntr, 0, 2)
+__define_perf_accessors(perfcntr, 1, 3)
+__define_perf_accessors(perfcntr, 2, 0)
+__define_perf_accessors(perfcntr, 3, 1)
+
+__define_perf_accessors(perfctrl, 0, 2)
+__define_perf_accessors(perfctrl, 1, 3)
+__define_perf_accessors(perfctrl, 2, 0)
+__define_perf_accessors(perfctrl, 3, 1)
+
+static inline int __n_counters(void)
+{
+ if (!(read_c0_config1() & M_CONFIG1_PC))
+ return 0;
+ if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+ return 1;
+ if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+ return 2;
+ if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+ return 3;
+
+ return 4;
+}
+
+static inline int n_counters(void)
+{
+ int counters;
+
+ switch (current_cpu_type()) {
+ case CPU_R10000:
+ counters = 2;
+ break;
+
+ case CPU_R12000:
+ case CPU_R14000:
+ counters = 4;
+ break;
+
+ default:
+ counters = __n_counters();
+ }
+
+ return counters;
+}
+
+static void reset_counters(void *arg)
+{
+ int counters = (int)(long)arg;
+ switch (counters) {
+ case 4:
+ w_c0_perfctrl3(0);
+ w_c0_perfcntr3(0);
+ case 3:
+ w_c0_perfctrl2(0);
+ w_c0_perfcntr2(0);
+ case 2:
+ w_c0_perfctrl1(0);
+ w_c0_perfcntr1(0);
+ case 1:
+ w_c0_perfctrl0(0);
+ w_c0_perfcntr0(0);
+ }
+}
+
+/* Used by Perf */
+#define MIPS_MAX_HWEVENTS 4
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define RM9K_COUNTER1_EVENT(event) ((event) << 0)
+#define RM9K_COUNTER1_SUPERVISOR (1ULL << 7)
+#define RM9K_COUNTER1_KERNEL (1ULL << 8)
+#define RM9K_COUNTER1_USER (1ULL << 9)
+#define RM9K_COUNTER1_ENABLE (1ULL << 10)
+#define RM9K_COUNTER1_OVERFLOW (1ULL << 15)
+
+#define RM9K_COUNTER2_EVENT(event) ((event) << 16)
+#define RM9K_COUNTER2_SUPERVISOR (1ULL << 23)
+#define RM9K_COUNTER2_KERNEL (1ULL << 24)
+#define RM9K_COUNTER2_USER (1ULL << 25)
+#define RM9K_COUNTER2_ENABLE (1ULL << 26)
+#define RM9K_COUNTER2_OVERFLOW (1ULL << 31)
+
+extern unsigned int rm9000_perfcount_irq;
+
+#elif defined(CONFIG_CPU_LOONGSON2)
+
+/*
+ * a patch should be sent to oprofile with the loongson-specific support.
+ * otherwise, the oprofile tool will not recognize this and complain about
+ * "cpu_type 'unset' is not valid".
+ */
+#define LOONGSON2_CPU_TYPE "mips/loongson2"
+
+#define LOONGSON2_COUNTER1_EVENT(event) ((event & 0x0f) << 5)
+#define LOONGSON2_COUNTER2_EVENT(event) ((event & 0x0f) << 9)
+
+#define LOONGSON2_PERFCNT_EXL (1UL << 0)
+#define LOONGSON2_PERFCNT_KERNEL (1UL << 1)
+#define LOONGSON2_PERFCNT_SUPERVISOR (1UL << 2)
+#define LOONGSON2_PERFCNT_USER (1UL << 3)
+#define LOONGSON2_PERFCNT_INT_EN (1UL << 4)
+#define LOONGSON2_PERFCNT_OVERFLOW (1ULL << 31)
+
+/* Loongson2 performance counter register */
+#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
+#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
+#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
+
+#endif /* CONFIG_CPU_* */
+
+#endif /* __MIPS_PMU_H__ */
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 29e2326..59b4c93 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -13,32 +13,11 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
+#include <asm/pmu.h>
#include <loongson.h> /* LOONGSON2_PERFCNT_IRQ */
#include "op_impl.h"
-/*
- * a patch should be sent to oprofile with the loongson-specific support.
- * otherwise, the oprofile tool will not recognize this and complain about
- * "cpu_type 'unset' is not valid".
- */
-#define LOONGSON2_CPU_TYPE "mips/loongson2"
-
-#define LOONGSON2_COUNTER1_EVENT(event) ((event & 0x0f) << 5)
-#define LOONGSON2_COUNTER2_EVENT(event) ((event & 0x0f) << 9)
-
-#define LOONGSON2_PERFCNT_EXL (1UL << 0)
-#define LOONGSON2_PERFCNT_KERNEL (1UL << 1)
-#define LOONGSON2_PERFCNT_SUPERVISOR (1UL << 2)
-#define LOONGSON2_PERFCNT_USER (1UL << 3)
-#define LOONGSON2_PERFCNT_INT_EN (1UL << 4)
-#define LOONGSON2_PERFCNT_OVERFLOW (1ULL << 31)
-
-/* Loongson2 performance counter register */
-#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
-#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
-#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
-#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
static struct loongson2_register_config {
unsigned int ctrl;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 54759f1..48461f7 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -11,116 +11,10 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <asm/irq_regs.h>
+#include <asm/pmu.h>
#include "op_impl.h"
-#define M_PERFCTL_EXL (1UL << 0)
-#define M_PERFCTL_KERNEL (1UL << 1)
-#define M_PERFCTL_SUPERVISOR (1UL << 2)
-#define M_PERFCTL_USER (1UL << 3)
-#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
-#define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5)
-#define M_PERFCTL_VPEID(vpe) ((vpe) << 16)
-#define M_PERFCTL_MT_EN(filter) ((filter) << 20)
-#define M_TC_EN_ALL M_PERFCTL_MT_EN(0)
-#define M_TC_EN_VPE M_PERFCTL_MT_EN(1)
-#define M_TC_EN_TC M_PERFCTL_MT_EN(2)
-#define M_PERFCTL_TCID(tcid) ((tcid) << 22)
-#define M_PERFCTL_WIDE (1UL << 30)
-#define M_PERFCTL_MORE (1UL << 31)
-
-#define M_COUNTER_OVERFLOW (1UL << 31)
-
-static int (*save_perf_irq)(void);
-
-#ifdef CONFIG_MIPS_MT_SMP
-static int cpu_has_mipsmt_pertccounters;
-#define WHAT (M_TC_EN_VPE | \
- M_PERFCTL_VPEID(cpu_data[smp_processor_id()].vpe_id))
-#define vpe_id() (cpu_has_mipsmt_pertccounters ? \
- 0 : cpu_data[smp_processor_id()].vpe_id)
-
-/*
- * The number of bits to shift to convert between counters per core and
- * counters per VPE. There is no reasonable interface atm to obtain the
- * number of VPEs used by Linux and in the 34K this number is fixed to two
- * anyways so we hardcore a few things here for the moment. The way it's
- * done here will ensure that oprofile VSMP kernel will run right on a lesser
- * core like a 24K also or with maxcpus=1.
- */
-static inline unsigned int vpe_shift(void)
-{
- if (num_possible_cpus() > 1)
- return 1;
-
- return 0;
-}
-
-#else
-
-#define WHAT 0
-#define vpe_id() 0
-
-static inline unsigned int vpe_shift(void)
-{
- return 0;
-}
-
-#endif
-
-static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
-{
- return counters >> vpe_shift();
-}
-
-static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
- return counters << vpe_shift();
-}
-
-#define __define_perf_accessors(r, n, np) \
- \
-static inline unsigned int r_c0_ ## r ## n(void) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- return read_c0_ ## r ## n(); \
- case 1: \
- return read_c0_ ## r ## np(); \
- default: \
- BUG(); \
- } \
- return 0; \
-} \
- \
-static inline void w_c0_ ## r ## n(unsigned int value) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- write_c0_ ## r ## n(value); \
- return; \
- case 1: \
- write_c0_ ## r ## np(value); \
- return; \
- default: \
- BUG(); \
- } \
- return; \
-} \
-
-__define_perf_accessors(perfcntr, 0, 2)
-__define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 0)
-__define_perf_accessors(perfcntr, 3, 1)
-
-__define_perf_accessors(perfctrl, 0, 2)
-__define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 0)
-__define_perf_accessors(perfctrl, 3, 1)
struct op_mips_model op_model_mipsxx_ops;
@@ -242,62 +136,6 @@ static int mipsxx_perfcount_handler(void)
return handled;
}
-#define M_CONFIG1_PC (1 << 4)
-
-static inline int __n_counters(void)
-{
- if (!(read_c0_config1() & M_CONFIG1_PC))
- return 0;
- if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
- return 1;
- if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
- return 2;
- if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
- return 3;
-
- return 4;
-}
-
-static inline int n_counters(void)
-{
- int counters;
-
- switch (current_cpu_type()) {
- case CPU_R10000:
- counters = 2;
- break;
-
- case CPU_R12000:
- case CPU_R14000:
- counters = 4;
- break;
-
- default:
- counters = __n_counters();
- }
-
- return counters;
-}
-
-static void reset_counters(void *arg)
-{
- int counters = (int)(long)arg;
- switch (counters) {
- case 4:
- w_c0_perfctrl3(0);
- w_c0_perfcntr3(0);
- case 3:
- w_c0_perfctrl2(0);
- w_c0_perfcntr2(0);
- case 2:
- w_c0_perfctrl1(0);
- w_c0_perfcntr1(0);
- case 1:
- w_c0_perfctrl0(0);
- w_c0_perfcntr0(0);
- }
-}
-
static int __init mipsxx_init(void)
{
int counters;
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index 3aa8138..48e7487 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -9,24 +9,10 @@
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
+#include <asm/pmu.h>
#include "op_impl.h"
-#define RM9K_COUNTER1_EVENT(event) ((event) << 0)
-#define RM9K_COUNTER1_SUPERVISOR (1ULL << 7)
-#define RM9K_COUNTER1_KERNEL (1ULL << 8)
-#define RM9K_COUNTER1_USER (1ULL << 9)
-#define RM9K_COUNTER1_ENABLE (1ULL << 10)
-#define RM9K_COUNTER1_OVERFLOW (1ULL << 15)
-
-#define RM9K_COUNTER2_EVENT(event) ((event) << 16)
-#define RM9K_COUNTER2_SUPERVISOR (1ULL << 23)
-#define RM9K_COUNTER2_KERNEL (1ULL << 24)
-#define RM9K_COUNTER2_USER (1ULL << 25)
-#define RM9K_COUNTER2_ENABLE (1ULL << 26)
-#define RM9K_COUNTER2_OVERFLOW (1ULL << 31)
-
-extern unsigned int rm9000_perfcount_irq;
static struct rm9k_register_config {
unsigned int control;
--
1.7.0.4
reply other threads:[~2010-04-23 10:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1272018970.4662.93.camel@fun-lab \
--to=dengcheng.zhu@gmail.com \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@redhat.com \
--cc=jamie.iles@picochip.com \
--cc=linux-mips@linux-mips.org \
--cc=mingo@elte.hu \
--cc=paulus@samba.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.