From: Gertjan van Wingerde <gwingerde@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: Ivo van Doorn <IvDoorn@gmail.com>,
<linux-wireless@vger.kernel.org>, <users@rt2x00.serialmonkey.com>,
Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH 4/9] rt2x00: Factor out TXWI writing to common rt2800 code.
Date: Sat, 8 May 2010 23:40:21 +0200 [thread overview]
Message-ID: <1273354826-4335-5-git-send-email-gwingerde@gmail.com> (raw)
In-Reply-To: <1273354826-4335-1-git-send-email-gwingerde@gmail.com>
TXWI writing is exactly the same for rt2800pci and rt2800usb, so
make it common code.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 54 +++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2800lib.h | 2 +
drivers/net/wireless/rt2x00/rt2800pci.c | 56 +------------------------------
drivers/net/wireless/rt2x00/rt2800usb.c | 50 ++--------------------------
4 files changed, 60 insertions(+), 102 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 525267d..28d82ce 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -281,6 +281,60 @@ int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
+void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc)
+{
+ __le32 *txwi = (__le32 *)(skb->data - TXWI_DESC_SIZE);
+ u32 word;
+
+ /*
+ * Initialize TX Info descriptor
+ */
+ rt2x00_desc_read(txwi, 0, &word);
+ rt2x00_set_field32(&word, TXWI_W0_FRAG,
+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+ rt2x00_set_field32(&word, TXWI_W0_TS,
+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
+ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+ rt2x00_set_field32(&word, TXWI_W0_BW,
+ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+ rt2x00_desc_write(txwi, 0, word);
+
+ rt2x00_desc_read(txwi, 1, &word);
+ rt2x00_set_field32(&word, TXWI_W1_ACK,
+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+ txdesc->key_idx : 0xff);
+ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+ txdesc->length);
+ rt2x00_set_field32(&word, TXWI_W1_PACKETID, txdesc->queue + 1);
+ rt2x00_desc_write(txwi, 1, word);
+
+ /*
+ * Always write 0 to IV/EIV fields, hardware will insert the IV
+ * from the IVEIV register when TXD_W3_WIV is set to 0.
+ * When TXD_W3_WIV is set to 1 it will use the IV data
+ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+ * crypto entry in the registers should be used to encrypt the frame.
+ */
+ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+}
+EXPORT_SYMBOL_GPL(rt2800_write_txwi);
+
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
const struct rt2x00debug rt2800_rt2x00debug = {
.owner = THIS_MODULE,
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index ebabeae..b805310 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -111,6 +111,8 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1);
+void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc);
+
extern const struct rt2x00debug rt2800_rt2x00debug;
int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b9ec081..bd56cd1 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -616,67 +616,13 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
static int rt2800pci_write_tx_data(struct queue_entry* entry,
struct txentry_desc *txdesc)
{
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct sk_buff *skb = entry->skb;
- struct skb_frame_desc *skbdesc;
int ret;
- __le32 *txwi;
- u32 word;
ret = rt2x00pci_write_tx_data(entry, txdesc);
if (ret)
return ret;
- skbdesc = get_skb_frame_desc(skb);
- txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom);
-
- /*
- * Initialize TX Info descriptor
- */
- rt2x00_desc_read(txwi, 0, &word);
- rt2x00_set_field32(&word, TXWI_W0_FRAG,
- test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
- rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
- rt2x00_set_field32(&word, TXWI_W0_TS,
- test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_AMPDU,
- test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
- rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
- rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
- rt2x00_set_field32(&word, TXWI_W0_BW,
- test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
- test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
- rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
- rt2x00_desc_write(txwi, 0, word);
-
- rt2x00_desc_read(txwi, 1, &word);
- rt2x00_set_field32(&word, TXWI_W1_ACK,
- test_bit(ENTRY_TXD_ACK, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_NSEQ,
- test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
- rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
- test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- txdesc->key_idx : 0xff);
- rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
- txdesc->length);
- rt2x00_set_field32(&word, TXWI_W1_PACKETID,
- skbdesc->entry->queue->qid + 1);
- rt2x00_desc_write(txwi, 1, word);
-
- /*
- * Always write 0 to IV/EIV fields, hardware will insert the IV
- * from the IVEIV register when TXD_W3_WIV is set to 0.
- * When TXD_W3_WIV is set to 1 it will use the IV data
- * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
- * crypto entry in the registers should be used to encrypt the frame.
- */
- _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
- _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+ rt2800_write_txwi(entry->skb, txdesc);
return 0;
}
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index df7ad98..b39b858 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -401,59 +401,15 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txi = skbdesc->desc;
- __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
u32 word;
/*
- * Initialize TX Info descriptor
+ * Initialize TXWI descriptor
*/
- rt2x00_desc_read(txwi, 0, &word);
- rt2x00_set_field32(&word, TXWI_W0_FRAG,
- test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
- rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
- rt2x00_set_field32(&word, TXWI_W0_TS,
- test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_AMPDU,
- test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
- rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
- rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
- rt2x00_set_field32(&word, TXWI_W0_BW,
- test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
- test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
- rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
- rt2x00_desc_write(txwi, 0, word);
-
- rt2x00_desc_read(txwi, 1, &word);
- rt2x00_set_field32(&word, TXWI_W1_ACK,
- test_bit(ENTRY_TXD_ACK, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_NSEQ,
- test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
- rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
- test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- txdesc->key_idx : 0xff);
- rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
- txdesc->length);
- rt2x00_set_field32(&word, TXWI_W1_PACKETID,
- skbdesc->entry->queue->qid + 1);
- rt2x00_desc_write(txwi, 1, word);
+ rt2800_write_txwi(skb, txdesc);
/*
- * Always write 0 to IV/EIV fields, hardware will insert the IV
- * from the IVEIV register when TXINFO_W0_WIV is set to 0.
- * When TXINFO_W0_WIV is set to 1 it will use the IV data
- * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
- * crypto entry in the registers should be used to encrypt the frame.
- */
- _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
- _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
-
- /*
- * Initialize TX descriptor
+ * Initialize TXINFO descriptor
*/
rt2x00_desc_read(txi, 0, &word);
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
--
1.7.1
next prev parent reply other threads:[~2010-05-08 21:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-08 21:40 [PATCH 0/9] rt2x00: Cleanups and fixes Gertjan van Wingerde
2010-05-08 21:40 ` [PATCH 1/9] rt2x00: Fix setting of txdesc->length field Gertjan van Wingerde
2010-05-09 9:03 ` Ivo Van Doorn
2010-05-09 9:18 ` Pavel Roskin
2010-05-08 21:40 ` [PATCH 2/9] rt2x00: Clean up rt2800usb.h Gertjan van Wingerde
2010-05-09 9:04 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 3/9] rt2x00: Don't check whether hardware crypto is enabled when reading RXD Gertjan van Wingerde
2010-05-09 9:08 ` Ivo Van Doorn
2010-05-08 21:40 ` Gertjan van Wingerde [this message]
2010-05-09 9:09 ` [PATCH 4/9] rt2x00: Factor out TXWI writing to common rt2800 code Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 5/9] rt2x00: Factor out RXWI processing " Gertjan van Wingerde
2010-05-09 9:10 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 6/9] rt2x00: Clean up generic procedures on descriptor writing Gertjan van Wingerde
2010-05-09 9:11 ` Ivo Van Doorn
2010-05-09 18:54 ` Adam Baker
2010-05-09 19:23 ` Gertjan van Wingerde
2010-05-08 21:40 ` [PATCH 7/9] rt2x00: Clean up all driver's kick_tx_queue callback functions Gertjan van Wingerde
2010-05-09 9:16 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 8/9] rt2x00: provide beacon's txdesc to write_beacon callback function Gertjan van Wingerde
2010-05-09 9:17 ` Ivo Van Doorn
2010-05-08 21:40 ` [PATCH 9/9] rt2x00: Fix beaconing on rt2800 Gertjan van Wingerde
2010-05-09 9:21 ` Ivo Van Doorn
2010-05-09 9:41 ` Gertjan van Wingerde
2010-05-09 9:42 ` Ivo Van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273354826-4335-5-git-send-email-gwingerde@gmail.com \
--to=gwingerde@gmail.com \
--cc=IvDoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.