All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: s.hauer@pengutronix.de
Cc: barebox@lists.infradead.org
Subject: [PATCH 4/6] eukrea_cpuimx27: add fb support
Date: Tue, 25 May 2010 12:01:28 +0200	[thread overview]
Message-ID: <1274781690-9022-4-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1274781690-9022-3-git-send-email-eric@eukrea.com>

Signed-off-by: Eric Bénard <eric@eukrea.com>
---
 board/eukrea_cpuimx27/eukrea_cpuimx27.c |   67 ++++++++++++++++++++++++++++++-
 1 files changed, 66 insertions(+), 1 deletions(-)

diff --git a/board/eukrea_cpuimx27/eukrea_cpuimx27.c b/board/eukrea_cpuimx27/eukrea_cpuimx27.c
index ef57a96..e40c260 100644
--- a/board/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/board/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -40,6 +40,7 @@
 #include <asm/io.h>
 #include <mach/imx-nand.h>
 #include <mach/imx-pll.h>
+#include <mach/imxfb.h>
 #include <ns16550.h>
 #include <asm/mmu.h>
 #include <i2c/i2c.h>
@@ -176,6 +177,39 @@ static void eukrea_cpuimx27_mmu_init(void)
 }
 #endif
 
+#ifdef CONFIG_DRIVER_VIDEO_IMX
+static struct imx_fb_videomode imxfb_mode = {
+	.mode = {
+		.name		= "CMO-QVGA",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= 156000,
+		.hsync_len	= 30,
+		.left_margin	= 38,
+		.right_margin	= 20,
+		.vsync_len	= 3,
+		.upper_margin	= 15,
+		.lower_margin	= 4,
+	},
+	.pcr		= 0xFAD08B80,
+	.bpp		= 16,};
+
+static struct imx_fb_platform_data eukrea_cpuimx27_fb_data = {
+	.mode	= &imxfb_mode,
+	.pwmr	= 0x00A903FF,
+	.lscr1	= 0x00120300,
+	.dmacr	= 0x00020010,
+};
+
+static struct device_d imxfb_dev = {
+	.name		= "imxfb",
+	.map_base	= 0x10021000,
+	.size		= 0x1000,
+	.platform_data	= &eukrea_cpuimx27_fb_data,
+};
+#endif
+
 static int eukrea_cpuimx27_devices_init(void)
 {
 	char *envdev = "no";
@@ -208,6 +242,31 @@ static int eukrea_cpuimx27_devices_init(void)
 		PE14_PF_UART1_CTS,
 		PE15_PF_UART1_RTS,
 #endif
+#ifdef CONFIG_DRIVER_VIDEO_IMX
+		PA5_PF_LSCLK,
+		PA6_PF_LD0,
+		PA7_PF_LD1,
+		PA8_PF_LD2,
+		PA9_PF_LD3,
+		PA10_PF_LD4,
+		PA11_PF_LD5,
+		PA12_PF_LD6,
+		PA13_PF_LD7,
+		PA14_PF_LD8,
+		PA15_PF_LD9,
+		PA16_PF_LD10,
+		PA17_PF_LD11,
+		PA18_PF_LD12,
+		PA19_PF_LD13,
+		PA20_PF_LD14,
+		PA21_PF_LD15,
+		PA22_PF_LD16,
+		PA23_PF_LD17,
+		PA28_PF_HSYNC,
+		PA29_PF_VSYNC,
+		PA31_PF_OE_ACD,
+		GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT,
+#endif
 	};
 
 	eukrea_cpuimx27_mmu_init();
@@ -217,7 +276,7 @@ static int eukrea_cpuimx27_devices_init(void)
 	CS0L = 0xA0330D01;
 	CS0A = 0x002208C0;
 
-	/* initizalize gpios */
+	/* initialize gpios */
 	for (i = 0; i < ARRAY_SIZE(mode); i++)
 		imx_gpio_mode(mode[i]);
 
@@ -239,6 +298,12 @@ static int eukrea_cpuimx27_devices_init(void)
 
 	printf("Using environment in %s Flash\n", envdev);
 
+#ifdef CONFIG_DRIVER_VIDEO_IMX
+	register_device(&imxfb_dev);
+	gpio_direction_output(GPIO_PORTE | 5, 0);
+	gpio_set_value(GPIO_PORTE | 5, 1);
+#endif
+
 	armlinux_add_dram(&sdram_dev);
 	armlinux_set_bootparams((void *)0xa0000100);
 	armlinux_set_architecture(MACH_TYPE_CPUIMX27);
-- 
1.6.3.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2010-05-25 10:01 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-25 10:01 [PATCH 1/6] i2c-imx: change log level for No ACK Eric Bénard
2010-05-25 10:01 ` [PATCH v2 2/6] i2c: implement i2c_get_adapter() Eric Bénard
2010-05-25 10:01   ` [PATCH v6 3/6] commands: add i2c commands Eric Bénard
2010-05-25 10:01     ` Eric Bénard [this message]
2010-05-25 10:01       ` [PATCH 5/6] eukrea_cpuimx27: update env Eric Bénard
2010-05-25 10:01         ` [PATCH 6/6] eukrea_cpuimx27: update defconfig Eric Bénard
  -- strict thread matches above, loose matches on Subject: below --
2010-05-25  8:37 [PATCH 1/6] i2c-imx: change log level for No ACK Eric Bénard
2010-05-25  8:37 ` [PATCH v2 2/6] i2c: implement i2c_get_adapter() Eric Bénard
2010-05-25  8:37   ` [PATCH v4 3/6] commands: add i2c commands Eric Bénard
2010-05-25  8:37     ` [PATCH 4/6] eukrea_cpuimx27: add fb support Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1274781690-9022-4-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.