From: Ben Hutchings <ben@decadent.org.uk>
To: Paul Chany <csanyipal@gmail.com>, 584238@bugs.debian.org
Cc: Petko Manolov <petkan@users.sourceforge.net>,
netdev <netdev@vger.kernel.org>
Subject: Re: Bug#584238: linux-image-2.6.32-3-486: When using USB to Ethernet nework adapter later on get error: blocked for more than 120 seconds
Date: Thu, 03 Jun 2010 00:24:13 +0100 [thread overview]
Message-ID: <1275521053.2870.70.camel@localhost> (raw)
In-Reply-To: <20100602144551.2330.64473.reportbug@debian-laptop.localdomain>
[-- Attachment #1: Type: text/plain, Size: 22568 bytes --]
On Wed, 2010-06-02 at 16:45 +0200, Paul Chany wrote:
> Package: linux-2.6
> Version: 2.6.32-9
> Severity: normal
> Tags: squeeze
>
> When using USB to Ethernet adapter later on get error on console:
>
> [11531.988248] INOF: task khubd:618 blocked for more than 120 seconds.
> [11531.988377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> message.
> [11531.990656] INFO: task pegasus:1156 blocked for more than 120 seconds.
> [11531.990722] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> message.
>
> After that I can't reconfigure anymore network, nor reboot the system with the command:
> sudo shutdown -t 1 -r now
> because the system hangs forever.
>
> It is not help if I unplug and plug in again the network adapter, it is not recognised by
> the kernel anymore.
I'm forwarding this to the pegasus driver developers so they can comment
on it.
Debian kernel version 2.6.32-9 is closely based on stable kernel
2.6.32.9.
Ben.
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-3-486 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 Thu Feb 25 05:35:13 UTC 2010
>
> ** Command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-486 root=UUID=127a8e72-b9d4-4a28-8aa9-e6cdcb3985c9 ro all_generic_ide quiet
>
> ** Not tainted
>
> ** Kernel log:
> [ 9.225611] PM: Error -22 checking image file
> [ 9.225628] PM: Resume from disk failed.
> [ 9.414135] EXT3-fs: INFO: recovery required on readonly filesystem.
> [ 9.414163] EXT3-fs: write access will be enabled during recovery.
> [ 10.688535] kjournald starting. Commit interval 5 seconds
> [ 10.688652] EXT3-fs: recovery complete.
> [ 10.710733] EXT3-fs: mounted filesystem with ordered data mode.
> [ 14.472786] udev: starting version 154
> [ 16.350029] Marking TSC unstable due to TSC halts in idle
> [ 16.360220] Switching to clocksource acpi_pm
> [ 16.364952] processor LNXCPU:00: registered as cooling_device1
> [ 16.973885] ACPI: AC Adapter [ADP1] (on-line)
> [ 17.006719] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
> [ 17.009207] ACPI: Lid Switch [LID]
> [ 17.014108] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 17.016375] ACPI: Power Button [PWRF]
> [ 17.061928] ACPI: Battery Slot [MBAT] (battery absent)
> [ 17.171064] input: PC Speaker as /devices/platform/pcspkr/input/input3
> [ 17.264959] psmouse serio1: ID: 12 02 3c
> [ 17.988705] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
> [ 18.017149] NET: Registered protocol family 23
> [ 18.052666] yenta_cardbus 0000:00:13.0: CardBus bridge found [1179:0001]
> [ 18.116480] parport_pc 00:0b: reported by Plug and Play ACPI
> [ 18.116647] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> [ 18.137705] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
> [ 18.137734] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
> [ 18.232354] yenta_cardbus 0000:00:13.0: ISA IRQ mask 0x0638, PCI irq 11
> [ 18.232382] yenta_cardbus 0000:00:13.0: Socket status: 30000007
> [ 18.237856] yenta_cardbus 0000:00:13.1: CardBus bridge found [1179:0001]
> [ 18.365096] yenta_cardbus 0000:00:13.1: ISA IRQ mask 0x0638, PCI irq 11
> [ 18.365127] yenta_cardbus 0000:00:13.1: Socket status: 30000007
> [ 18.589661] donauboe 0000:00:11.0: power state changed by ACPI to D0
> [ 18.673099] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 18.673147] donauboe 0000:00:11.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
> [ 18.683045] IrDA: Registered device irda0
> [ 18.683071] toshoboe: Using multiple tasks
> [ 19.942533] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
> [ 19.943975] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
> [ 19.946283] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f
> [ 19.947698] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
> [ 19.948699] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
> [ 19.949502] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
> [ 19.951565] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
> [ 19.952689] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
> [ 19.953498] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
> [ 19.955555] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
> [ 22.724794] Adding 176672k swap on /dev/sda8. Priority:-1 extents:1 across:176672k
> [ 23.986386] EXT3 FS on sda1, internal journal
> [ 24.322216] device-mapper: uevent: version 1.0.3
> [ 24.330289] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
> [ 25.052483] loop: module loaded
> [ 48.955794] kjournald starting. Commit interval 5 seconds
> [ 48.956308] EXT3 FS on sda6, internal journal
> [ 48.956349] EXT3-fs: mounted filesystem with ordered data mode.
> [ 49.174455] kjournald starting. Commit interval 5 seconds
> [ 49.174926] EXT3 FS on sda7, internal journal
> [ 49.174962] EXT3-fs: mounted filesystem with ordered data mode.
> [ 49.432381] kjournald starting. Commit interval 5 seconds
> [ 49.432966] EXT3 FS on sda5, internal journal
> [ 49.433005] EXT3-fs: mounted filesystem with ordered data mode.
> [ 49.665115] kjournald starting. Commit interval 5 seconds
> [ 49.665786] EXT3 FS on sda9, internal journal
> [ 49.665823] EXT3-fs: mounted filesystem with ordered data mode.
> [ 54.377286] fuse init (API version 7.13)
> [ 74.213762] Program wdm tried to access /dev/mem between 100000->102000.
> [ 567.364143] usb 1-1: new full speed USB device using ohci_hcd and address 2
> [ 567.582139] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
> [ 567.582166] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 567.582188] usb 1-1: Product: USB To LAN Converter
> [ 567.582205] usb 1-1: Manufacturer: ADMtek
> [ 567.582221] usb 1-1: SerialNumber: 0001
> [ 567.583936] usb 1-1: configuration #1 chosen from 1 choice
> [ 571.013676] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
> [ 571.045528] pegasus 1-1:1.0: setup Pegasus II specific registers
> [ 571.210220] pegasus 1-1:1.0: eth0, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:70:01:11:f1
> [ 571.211093] usbcore: registered new interface driver pegasus
> [ 574.285384] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 574.285772] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 574.285887] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 574.286411] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 578.781286] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 585.052090] eth0: no IPv6 routers present
> [ 1947.028159] end_request: I/O error, dev fd0, sector 0
> [ 1947.232118] end_request: I/O error, dev fd0, sector 0
> [ 2105.253068] usb 1-1: USB disconnect, address 2
> [ 2544.772228] usb 1-1: new full speed USB device using ohci_hcd and address 3
> [ 2544.990232] usb 1-1: New USB device found, idVendor=07a6, idProduct=8515
> [ 2544.990264] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 2544.990287] usb 1-1: Product: USB To LAN Converter
> [ 2544.990304] usb 1-1: Manufacturer: ADMtek
> [ 2544.990320] usb 1-1: SerialNumber: 0001
> [ 2544.991871] usb 1-1: configuration #1 chosen from 1 choice
> [ 2545.028225] pegasus 1-1:1.0: setup Pegasus II specific registers
> [ 2545.254633] pegasus 1-1:1.0: eth0, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:70:01:11:f1
> [ 2556.080650] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2556.081018] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2556.081132] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2556.081408] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2558.463393] pegasus 1-1:1.0: update_eth_regs_async, status -22
> [ 2566.472084] eth0: no IPv6 routers present
>
> ** Model information
> not available
>
> ** Loaded modules:
> Module Size Used by
> pegasus 14734 0
> mii 2654 1 pegasus
> fuse 42747 1
> loop 9561 0
> dm_crypt 9023 0
> dm_mod 45901 1 dm_crypt
> snd_opl3sa2 10888 1
> snd_wss_lib 17401 1 snd_opl3sa2
> snd_pcm_oss 28551 0
> snd_mixer_oss 10473 2 snd_pcm_oss
> snd_pcm 46210 2 snd_wss_lib,snd_pcm_oss
> snd_page_alloc 5017 2 snd_wss_lib,snd_pcm
> snd_opl3_lib 6130 1 snd_opl3sa2
> snd_hwdep 4022 1 snd_opl3_lib
> snd_mpu401_uart 4155 1 snd_opl3sa2
> snd_seq_midi 3572 0
> snd_rawmidi 12737 2 snd_mpu401_uart,snd_seq_midi
> snd_seq_midi_event 3848 1 snd_seq_midi
> snd_seq 35413 2 snd_seq_midi,snd_seq_midi_event
> snd_timer 12292 4 snd_wss_lib,snd_pcm,snd_opl3_lib,snd_seq
> snd_seq_device 3661 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
> pcmcia 16438 0
> donauboe 6996 0
> snd 34102 12 snd_opl3sa2,snd_wss_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> toshiba_acpi 4361 0
> parport_pc 15783 0
> serio_raw 2912 0
> yenta_socket 16335 2
> irda 71654 1 donauboe
> rsrc_nonstatic 7061 1 yenta_socket
> parport 22170 1 parport_pc
> soundcore 3294 2 snd
> pcspkr 1235 0
> container 1833 0
> rfkill 10658 1 toshiba_acpi
> battery 3774 0
> crc_ccitt 1039 2 donauboe,irda
> button 3578 0
> ac 1628 0
> psmouse 48174 0
> pcmcia_core 20506 3 pcmcia,yenta_socket,rsrc_nonstatic
> evdev 5520 6
> processor 23235 1
> ext3 92724 5
> jbd 27946 1 ext3
> mbcache 3482 1 ext3
> sg 16463 0
> ohci_hcd 17096 0
> ehci_hcd 27716 0
> fan 2590 0
> sr_mod 10734 1
> floppy 41131 0
> usbcore 98034 4 pegasus,ohci_hcd,ehci_hcd
> sd_mod 25733 7
> cdrom 26475 1 sr_mod
> thermal 9210 0
> crc_t10dif 1012 1 sd_mod
> nls_base 4445 1 usbcore
> thermal_sys 9346 3 processor,fan,thermal
> ata_generic 2011 7
> libata 115918 1 ata_generic
> scsi_mod 102173 4 sg,sr_mod,sd_mod,libata
>
> ** Network interface configuration:
>
> auto lo
> iface lo inet loopback
>
> allow-hotplug eth0
> iface eth0 inet dhcp
>
> ** Network status:
> *** IP interfaces and addresses:
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN qlen 8
> link/irda 00:00:00:00 brd ff:ff:ff:ff
> 4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
> link/ether 00:00:70:01:11:f1 brd ff:ff:ff:ff:ff:ff
> inet 192.168.10.92/24 brd 192.168.10.255 scope global eth0
> inet6 fe80::200:70ff:fe01:11f1/64 scope link
> valid_lft forever preferred_lft forever
>
> *** Device statistics:
> Inter-| Receive | Transmit
> face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
> lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> irda0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> eth0: 179607 301 0 0 0 0 0 0 22820 231 0 0 0 0 0 0
>
> *** Protocol statistics:
> Ip:
> 1833 total packets received
> 4 with invalid addresses
> 0 forwarded
> 0 incoming packets discarded
> 1649 incoming packets delivered
> 1312 requests sent out
> 44 dropped because of missing route
> Icmp:
> 0 ICMP messages received
> 0 input ICMP message failed.
> ICMP input histogram:
> 0 ICMP messages sent
> 0 ICMP messages failed
> ICMP output histogram:
> Tcp:
> 33 active connections openings
> 0 passive connection openings
> 0 failed connection attempts
> 16 connection resets received
> 0 connections established
> 1363 segments received
> 1086 segments send out
> 0 segments retransmited
> 0 bad segments received.
> 27 resets sent
> Udp:
> 213 packets received
> 0 packets to unknown port received.
> 0 packet receive errors
> 222 packets sent
> UdpLite:
> TcpExt:
> 1 TCP sockets finished time wait in fast timer
> 33 delayed acks sent
> 923 packets directly queued to recvmsg prequeue.
> 8688 bytes directly in process context from backlog
> 1131509 bytes directly received in process context from prequeue
> 275 packet headers predicted
> 784 packets header predicted and directly queued to user
> 51 acknowledgments not containing data payload received
> 131 predicted acknowledgments
> 1 connections reset due to unexpected data
> 16 connections reset due to early user close
> IpExt:
> InMcastPkts: 21
> OutMcastPkts: 25
> InBcastPkts: 73
> InOctets: 1695218
> OutOctets: 106998
> InMcastOctets: 5451
> OutMcastOctets: 5611
> InBcastOctets: 13564
>
> *** Device features:
> eth0: 0x0
> irda0: 0x0
> lo: 0x13865
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Toshiba America Info Systems CPU to PCI bridge [1179:0601] (rev a2)
> Subsystem: Toshiba America Info Systems Satellite Pro [1179:0001]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:07.0 Communication controller [0780]: Agere Systems 56k WinModem [11c1:0441] (rev 01)
> Subsystem: Toshiba America Info Systems Internal V.90 Modem [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (63000ns min, 3500ns max)
> Interrupt: pin A routed to IRQ 3
> Region 0: Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
> Region 1: I/O ports at 02f8 [size=8]
> Region 2: I/O ports at 1c00 [size=256]
> Capabilities: <access denied>
>
> 00:08.0 VGA compatible controller [0300]: S3 Inc. ViRGE/MX [5333:8c01] (rev 06) (prog-if 00 [VGA controller])
> Subsystem: Toshiba America Info Systems ViRGE/MX [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (1000ns min, 63750ns max)
> Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
> Expansion ROM at 18000000 [disabled] [size=64K]
>
> 00:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 02) (prog-if 10 [OHCI])
> Subsystem: Toshiba America Info Systems USB [1179:0001]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
> Latency: 64 (250ns min, 5250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:10.0 IDE interface [0101]: Toshiba America Info Systems Extended IDE Controller [1179:0102] (rev 34) (prog-if f0)
> Subsystem: Toshiba America Info Systems Device [1179:0002]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min, 10000ns max)
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
> Region 4: I/O ports at 1800 [size=16]
> Kernel driver in use: ata_generic
> Kernel modules: ata_generic, ide-pci-generic
>
> 00:11.0 Communication controller [0780]: Toshiba America Info Systems FIR Port Type-O [1179:0701] (rev 23)
> Subsystem: Toshiba America Info Systems Device [1179:0001]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at ffe0 [size=32]
> Kernel driver in use: donauboe
> Kernel modules: donauboe
>
> 00:13.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 07)
> Subsystem: Toshiba America Info Systems Satellite 4010 [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 18010000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
> Memory window 0: 08000000-0bfff000 (prefetchable)
> Memory window 1: 0c000000-0ffff000
> I/O window 0: 00001000-000010ff
> I/O window 1: 00001400-000014ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
> Kernel modules: yenta_socket
>
> 00:13.1 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 07)
> Subsystem: Toshiba America Info Systems Satellite 4010 [1179:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at 18011000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
> Memory window 0: 10000000-13fff000 (prefetchable)
> Memory window 1: 14000000-17fff000
> I/O window 0: 00002000-000020ff
> I/O window 1: 00002400-000024ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
> Kernel modules: yenta_socket
>
>
> ** USB devices:
> Bus 001 Device 003: ID 07a6:8515 ADMtek, Inc. AN8515 Ethernet
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
>
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers testing
> APT policy: (500, 'testing')
> Architecture: i386 (i586)
>
> Kernel: Linux 2.6.32-3-486
> Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
> Versions of packages linux-image-2.6.32-3-486 depends on:
> ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
> ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
> ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.32-3-486 recommends:
> ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
>
> Versions of packages linux-image-2.6.32-3-486 suggests:
> ii grub 0.97-61 GRand Unified Bootloader (dummy pa
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-3-486 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> pn firmware-iwlwifi <none> (no description available)
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
>
> -- debconf information:
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.32-3-486/prerm/removing-running-kernel-2.6.32-3-486: true
> linux-image-2.6.32-3-486/postinst/bootloader-error-2.6.32-3-486:
> linux-image-2.6.32-3-486/postinst/missing-firmware-2.6.32-3-486:
> linux-image-2.6.32-3-486/postinst/bootloader-test-error-2.6.32-3-486:
> linux-image-2.6.32-3-486/postinst/depmod-error-initrd-2.6.32-3-486: false
> linux-image-2.6.32-3-486/prerm/would-invalidate-boot-loader-2.6.32-3-486: true
>
>
>
--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
next parent reply other threads:[~2010-06-02 23:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100602144551.2330.64473.reportbug@debian-laptop.localdomain>
2010-06-02 23:24 ` Ben Hutchings [this message]
2010-06-09 13:15 ` Bug#584238: linux-image-2.6.32-3-486: When using USB to Ethernet nework adapter later on get error: blocked for more than 120 seconds Paul Chany
2010-06-10 6:49 ` Petko Manolov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275521053.2870.70.camel@localhost \
--to=ben@decadent.org.uk \
--cc=584238@bugs.debian.org \
--cc=csanyipal@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=petkan@users.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.