From: Ben Hutchings <ben@decadent.org.uk>
To: Roger Luethi <rl@hellgate.ch>
Cc: netdev@vger.kernel.org, "R. Scott Bailey" <scott@cartasoft.com>,
584724@bugs.debian.org
Subject: Re: Bug#584724: linux-image-2.6.32-5-amd64: NETDEV WATCHDOG: (via-rhine): transmit queue 0 timed out
Date: Sun, 06 Jun 2010 22:23:45 +0100 [thread overview]
Message-ID: <1275859426.10677.69.camel@localhost> (raw)
In-Reply-To: <20100606024158.12393.82960.reportbug@buzz.bailey>
[-- Attachment #1: Type: text/plain, Size: 40499 bytes --]
Roger,
There's some kind of TX lock-up bug in via-rhine (or more likely certain
variants of the hardware).
On Sat, 2010-06-05 at 22:41 -0400, R. Scott Bailey wrote:
> Package: linux-2.6
> Version: 2.6.32-15
> Severity: normal
>
> This appears to be the same bug as:
> https://bugzilla.kernel.org/show_bug.cgi?id=11663
>
> I have attached kernel output; once the timeout occurs, the interface is
> unusable and bounces spastically (without becoming operational) until the
> system is rebooted. This most often is triggered by samba traffic, but that
> could be because that is just the heaviest traffic on my system. ;-)
>
> BTW, this interface is reported by lspci as:
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
>
> Double-BTW, this is not a new problem with 2.6.32, but our activity levels
> have picked up recently and trigger it more frequently.
Here's that attachment inline:
> Jun 5 21:01:57 buzz kernel: [104288.805044] WARNING: at /build/buildd-linux-2.6_2.6.32-15-i386-fb7Hfg/linux-2.6-2.6.32/debian/build/source_i386_none/net/sched/sch_generic.c:261 dev_watchdog+0xd2/0x16f()
> Jun 5 21:01:57 buzz kernel: [104288.805052] Hardware name: MS-7253
> Jun 5 21:01:57 buzz kernel: [104288.805057] NETDEV WATCHDOG: eth0 (via-rhine): transmit queue 0 timed out
> Jun 5 21:01:57 buzz kernel: [104288.805062] Modules linked in: tcp_diag inet_diag ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs via drm ip6_tables ppdev lp xt_multiport iptable_filter ip_tables x_tables kvm_amd kvm powernow_k8 cpufreq_stats cpufreq_powersave cpufreq_userspace cpufreq_conservative dm_snapshot dm_mirror dm_region_hash dm_log fuse nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc ext3 jbd ext2 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc psmouse i2c_viapro tpm_tis evdev tpm k8temp tpm_bios edac_core pcspkr serio_raw i2c_core edac_mce_amd parport_pc parport shpchp pci_hotplug button processor sha256_generic aes_x86_64 aes_generic cbc ext4 mbcache jbd2 crc16 dm_crypt raid1 md_mod reiserfs dm_mod usb_storage usbhid hid sg sr_mod cdrom st sd_mod crc_t10dif osst ata_generic sata_via thermal uhci_
> hcd via_rhine pata_via atp870u tul
> Jun 5 21:01:57 buzz kernel: p libata ehci_hcd thermal_sys mii usbcore nls_base scsi_mod [last unloaded: scsi_wait_scan]
> Jun 5 21:01:57 buzz kernel: [104288.805243] Pid: 0, comm: swapper Not tainted 2.6.32-5-amd64 #1
> Jun 5 21:01:57 buzz kernel: [104288.805248] Call Trace:
> Jun 5 21:01:57 buzz kernel: [104288.805253] <IRQ> [<ffffffff8125defb>] ? dev_watchdog+0xd2/0x16f
> Jun 5 21:01:57 buzz kernel: [104288.805268] [<ffffffff8125defb>] ? dev_watchdog+0xd2/0x16f
> Jun 5 21:01:57 buzz kernel: [104288.805278] [<ffffffff8104db48>] ? warn_slowpath_common+0x77/0xa3
> Jun 5 21:01:57 buzz kernel: [104288.805285] [<ffffffff8125de29>] ? dev_watchdog+0x0/0x16f
> Jun 5 21:01:57 buzz kernel: [104288.805292] [<ffffffff8104dbd0>] ? warn_slowpath_fmt+0x51/0x59
> Jun 5 21:01:57 buzz kernel: [104288.805304] [<ffffffff8104a046>] ? try_to_wake_up+0x249/0x259
> Jun 5 21:01:57 buzz kernel: [104288.805314] [<ffffffff81064853>] ? autoremove_wake_function+0x9/0x2e
> Jun 5 21:01:57 buzz kernel: [104288.805321] [<ffffffff8125ddfd>] ? netif_tx_lock+0x3d/0x69
> Jun 5 21:01:57 buzz kernel: [104288.805330] [<ffffffff81248dec>] ? netdev_drivername+0x3b/0x40
> Jun 5 21:01:57 buzz kernel: [104288.805338] [<ffffffff8125defb>] ? dev_watchdog+0xd2/0x16f
> Jun 5 21:01:57 buzz kernel: [104288.805347] [<ffffffff81030065>] ? amd_iommu_map_range+0x13/0x8a
> Jun 5 21:01:57 buzz kernel: [104288.805356] [<ffffffff81061834>] ? __queue_work+0x22/0x32
> Jun 5 21:01:57 buzz kernel: [104288.805366] [<ffffffff8105a05f>] ? run_timer_softirq+0x1c9/0x268
> Jun 5 21:01:57 buzz kernel: [104288.805377] [<ffffffff810538b2>] ? __do_softirq+0xdd/0x19f
> Jun 5 21:01:57 buzz kernel: [104288.805387] [<ffffffff81024c92>] ? lapic_next_event+0x18/0x1d
> Jun 5 21:01:57 buzz kernel: [104288.805396] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
> Jun 5 21:01:57 buzz kernel: [104288.805403] [<ffffffff81013903>] ? do_softirq+0x3f/0x7c
> Jun 5 21:01:57 buzz kernel: [104288.805411] [<ffffffff81053721>] ? irq_exit+0x36/0x76
> Jun 5 21:01:57 buzz kernel: [104288.805419] [<ffffffff81025757>] ? smp_apic_timer_interrupt+0x87/0x95
> Jun 5 21:01:57 buzz kernel: [104288.805426] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20
> Jun 5 21:01:57 buzz kernel: [104288.805431] <EOI> [<ffffffff8102c558>] ? native_safe_halt+0x2/0x3
> Jun 5 21:01:57 buzz kernel: [104288.805448] [<ffffffff81017c6d>] ? default_idle+0x34/0x51
> Jun 5 21:01:57 buzz kernel: [104288.805456] [<ffffffff81017ff9>] ? c1e_idle+0xf5/0xfb
> Jun 5 21:01:57 buzz kernel: [104288.805466] [<ffffffff8100feb1>] ? cpu_idle+0xa2/0xda
> Jun 5 21:01:57 buzz kernel: [104288.805472] ---[ end trace 6b516d8045567b1e ]---
> Jun 5 21:01:57 buzz kernel: [104288.805621] eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
> Jun 5 21:01:57 buzz kernel: [104288.806347] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> Jun 5 21:02:00 buzz kernel: [104292.805163] eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
> Jun 5 21:02:00 buzz kernel: [104292.805934] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
More system information follows:
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 06:11:58 UTC 2010
>
> ** Command line:
> BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg00-root ro ipv6.disable=1 rootdelay=10
>
> ** Not tainted
>
> ** Kernel log:
> [ 20.917471] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 20.924598] udev: renamed network interface eth0 to eth1
> [ 20.953407] udev: renamed network interface eth1_rename to eth0
> [ 21.014759] parport_pc 00:0a: reported by Plug and Play ACPI
> [ 21.014871] parport0: PC-style at 0x378, irq 7 [PCSPP]
> [ 21.018448] input: PC Speaker as /devices/platform/pcspkr/input/input5
> [ 21.032277] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
> [ 21.209202] EDAC MC: Ver: 2.1.0 Jun 1 2010
> [ 21.226787] st0: Block limits 2 - 16777214 bytes.
> [ 21.229458] EDAC amd64_edac: Ver: 3.2.0 Jun 1 2010
> [ 21.229633] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
> [ 21.229720] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
> [ 21.229722] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
> [ 21.229723] (Note that use of the override may cause unknown side effects.)
> [ 21.229934] amd64_edac: probe of 0000:00:18.2 failed with error -22
> [ 21.373141] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 21.373280] HDA Intel 0000:04:01.0: setting latency timer to 64
> [ 21.373285] HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device
> [ 21.461004] hda_codec: ALC883: BIOS auto-probing.
> [ 21.462907] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/input/input6
> [ 22.156505] Adding 262136k swap on /dev/mapper/vg00-swap. Priority:-1 extents:1 across:262136k
> [ 32.897030] kjournald starting. Commit interval 5 seconds
> [ 32.909096] EXT3 FS on md0, internal journal
> [ 32.909200] EXT3-fs: mounted filesystem with ordered data mode.
> [ 33.073055] kjournald starting. Commit interval 5 seconds
> [ 33.156713] EXT3 FS on dm-5, internal journal
> [ 33.156817] EXT3-fs: mounted filesystem with ordered data mode.
> [ 33.181588] kjournald starting. Commit interval 5 seconds
> [ 33.182243] EXT3 FS on dm-4, internal journal
> [ 33.182343] EXT3-fs: mounted filesystem with ordered data mode.
> [ 33.232237] EXT4-fs (dm-9): mounted filesystem with ordered data mode
> [ 33.287448] EXT4-fs (dm-6): mounted filesystem with ordered data mode
> [ 33.348953] EXT4-fs (dm-3): mounted filesystem with ordered data mode
> [ 33.414076] EXT4-fs (dm-1): mounted filesystem with ordered data mode
> [ 33.497949] EXT4-fs (dm-2): mounted filesystem with ordered data mode
> [ 33.672536] EXT4-fs (dm-12): mounted filesystem with ordered data mode
> [ 33.725336] EXT4-fs (dm-7): mounted filesystem with ordered data mode
> [ 33.791361] EXT4-fs (dm-10): mounted filesystem with ordered data mode
> [ 33.865425] EXT4-fs (dm-11): mounted filesystem with ordered data mode
> [ 33.964434] EXT4-fs (dm-13): mounted filesystem with ordered data mode
> [ 50.233632] RPC: Registered udp transport module.
> [ 50.233703] RPC: Registered tcp transport module.
> [ 50.233759] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 50.261049] Slow work thread pool: Starting up
> [ 50.261195] Slow work thread pool: Ready
> [ 50.261332] FS-Cache: Loaded
> [ 50.317395] FS-Cache: Netfs 'nfs' registered for caching
> [ 50.349999] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 50.925510] fuse init (API version 7.13)
> [ 52.467290] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
> [ 52.467426] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc
> [ 52.467483] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe
> [ 52.467541] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10
> [ 52.467599] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
> [ 52.678554] kvm: Nested Virtualization enabled
> [ 53.153019] Clocksource tsc unstable (delta = -269844223 ns)
> [ 55.712610] st0: Failed to read 64512 byte block with 80 byte transfer.
> [ 71.320893] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 73.046091] lp0: using parport0 (interrupt-driven).
> [ 73.057427] ppdev: user-space parallel port driver
> [ 76.243406] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 78.057768] [drm] Initialized drm 1.1.0 20060810
> [ 78.162620] alloc irq_desc for 16 on node 0
> [ 78.162625] alloc kstat_irqs on node 0
> [ 78.162636] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 78.164716] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
> [ 78.165039] ioctl32(Xorg:3623): Unknown cmd fd(11) cmd(c0106407){t:'d';sz:16} arg(ff894e10) on /dev/dri/card0
> [ 78.165056] ioctl32(Xorg:3623): Unknown cmd fd(11) cmd(c0086401){t:'d';sz:8} arg(ff894e08) on /dev/dri/card0
> [ 78.228349] ioctl32(Xorg:3623): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0869c910) on /dev/dri/card0
> [ 78.234915] ioctl32(Xorg:3623): Unknown cmd fd(11) cmd(c0246400){t:'d';sz:36} arg(0869c910) on /dev/dri/card0
> [ 82.424895] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 82.437939] NFSD: starting 90-second grace period
> [ 306.805357] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
> [ 306.807862] SGI XFS Quota Management subsystem
> [ 306.825141] JFS: nTxBlock = 8192, nTxLock = 65536
> [ 306.851135] NTFS driver 2.1.29 [Flags: R/W MODULE].
> [ 306.872372] QNX4 filesystem 0.2.3 registered.
> [ 686.805028] ata4: lost interrupt (Status 0x51)
> [ 691.805047] ata4.01: qc timeout (cmd 0xa0)
> [ 691.805064] ata4.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 691.805092] sr 4:0:1:0: CDB: Test Unit Ready: 00 00 00 00 00 00
> [ 691.805105] ata4.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
> [ 691.805106] res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
> [ 691.805110] ata4.01: status: { DRDY ERR }
> [ 691.805136] ata4: soft resetting link
> [ 692.193313] ata4.01: configured for UDMA/66
> [ 697.193028] ata4.01: qc timeout (cmd 0xa0)
> [ 697.193037] ata4.01: TEST_UNIT_READY failed (err_mask=0x5)
> [ 697.193060] ata4: soft resetting link
> [ 697.585251] ata4.01: configured for UDMA/66
> [ 702.585058] ata4.01: qc timeout (cmd 0xa0)
> [ 702.585071] ata4.01: TEST_UNIT_READY failed (err_mask=0x5)
> [ 702.585076] ata4.01: limiting speed to UDMA/66:PIO3
> [ 702.585103] ata4: soft resetting link
> [ 702.977291] ata4.01: configured for UDMA/66
> [ 707.977030] ata4.01: qc timeout (cmd 0xa0)
> [ 707.977040] ata4.01: TEST_UNIT_READY failed (err_mask=0x5)
> [ 707.977043] ata4.01: disabled
> [ 707.977081] ata4: soft resetting link
> [ 708.301095] ata4: EH complete
>
> ** Model information
> sys_vendor: MICRO-STAR INTERNATIONAL CO., LTD
> product_name: MS-7253
> product_version: 1.00
> chassis_vendor:
> chassis_version:
> bios_vendor: Phoenix Technologies, LTD
> bios_version: 6.00 PG
> board_vendor: MICRO-STAR INTERNATIONAL CO., LTD
> board_name: MS-7253
> board_version: 1.00
>
> ** Loaded modules:
> Module Size Used by
> ufs 56458 0
> qnx4 6194 0
> hfsplus 64966 0
> hfs 37199 0
> minix 21117 0
> ntfs 162540 0
> vfat 7836 0
> msdos 5914 0
> fat 39990 2 vfat,msdos
> jfs 140115 0
> xfs 436189 0
> via 32847 0
> drm 142199 1 via
> ip6_tables 14867 0
> ppdev 5030 0
> lp 7462 0
> xt_multiport 2267 1
> iptable_filter 2258 1
> ip_tables 13675 1 iptable_filter
> x_tables 12685 3 ip6_tables,xt_multiport,ip_tables
> kvm_amd 31222 0
> kvm 213448 1 kvm_amd
> powernow_k8 10978 1
> cpufreq_stats 2659 0
> cpufreq_powersave 902 0
> cpufreq_userspace 1992 0
> cpufreq_conservative 5162 0
> dm_snapshot 18513 0
> dm_mirror 10843 0
> dm_region_hash 6680 1 dm_mirror
> dm_log 7381 2 dm_mirror,dm_region_hash
> fuse 49982 1
> nfsd 253350 13
> exportfs 3122 2 xfs,nfsd
> nfs 239786 0
> lockd 57299 2 nfsd,nfs
> fscache 29818 1 nfs
> nfs_acl 2031 2 nfsd,nfs
> auth_rpcgss 33428 2 nfsd,nfs
> sunrpc 160117 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
> ext3 106326 3
> jbd 36861 1 ext3
> ext2 52953 1
> snd_hda_codec_realtek 235026 1
> snd_hda_intel 19907 0
> snd_hda_codec 53892 2 snd_hda_codec_realtek,snd_hda_intel
> snd_hwdep 5236 1 snd_hda_codec
> snd_pcm_oss 32415 0
> snd_mixer_oss 12478 1 snd_pcm_oss
> snd_pcm 60119 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_seq_midi 4256 0
> snd_rawmidi 15323 1 snd_seq_midi
> snd_seq_midi_event 4628 1 snd_seq_midi
> snd_seq 41281 2 snd_seq_midi,snd_seq_midi_event
> snd_timer 15486 2 snd_pcm,snd_seq
> snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
> snd 45918 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> edac_core 29197 0
> psmouse 49777 0
> soundcore 4566 1 snd
> edac_mce_amd 6433 0
> evdev 7352 14
> tpm_tis 7336 0
> snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
> tpm 9549 1 tpm_tis
> pcspkr 1699 0
> tpm_bios 4489 1 tpm
> serio_raw 3752 0
> k8temp 3139 0
> parport_pc 18855 1
> i2c_viapro 5483 0
> i2c_core 15328 2 drm,i2c_viapro
> parport 27682 3 ppdev,lp,parport_pc
> shpchp 26232 0
> pci_hotplug 21203 1 shpchp
> button 4650 0
> processor 30167 1 powernow_k8
> sha256_generic 8644 2
> aes_x86_64 7340 2
> aes_generic 25714 1 aes_x86_64
> cbc 2507 1
> ext4 285387 11
> mbcache 5050 3 ext3,ext2,ext4
> jbd2 66823 1 ext4
> crc16 1319 1 ext4
> dm_crypt 10491 1
> raid1 17999 2
> md_mod 73040 3 raid1
> reiserfs 193756 0
> dm_mod 53434 58 dm_snapshot,dm_mirror,dm_log,dm_crypt
> usb_storage 39337 1
> usbhid 33244 2
> hid 62793 1 usbhid
> sg 18632 0
> sr_mod 12250 0
> sd_mod 29553 8
> crc_t10dif 1276 1 sd_mod
> cdrom 28631 1 sr_mod
> st 30404 2
> ata_generic 2983 0
> osst 44725 0
> pata_via 7461 0
> uhci_hcd 18521 0
> sata_via 7789 4
> via_rhine 17371 0
> atp870u 24161 1
> thermal 11610 0
> tulip 41368 0
> thermal_sys 11942 2 processor,thermal
> ehci_hcd 31023 0
> libata 133008 3 ata_generic,pata_via,sata_via
> scsi_mod 121717 8 usb_storage,sg,sr_mod,sd_mod,st,osst,atp870u,libata
> mii 3210 1 via_rhine
> usbcore 121671 7 usb_storage,usbhid,uhci_hcd,ehci_hcd
> nls_base 6361 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:0336]
> Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge [1106:0336]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 8, Cache Line Size: 32 bytes
> Region 0: Memory at <ignored> (32-bit, prefetchable)
> Capabilities: <access denied>
> Kernel driver in use: agpgart-amd64
>
> 00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:1336]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:2336]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:3336]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:4336]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.5 PIC [0800]: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller [1106:5336] (prog-if 20 [IO(X)-APIC])
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge [1106:7336]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: dd000000-deffffff
> Prefetchable memory behind bridge: c0000000-cfffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:02.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:a238] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: dfc00000-dfcfffff
> Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:03.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:c238] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: dfe00000-dfefffff
> Prefetchable memory behind bridge: 00000000dfd00000-00000000dfdfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT8237A SATA 2-Port Controller [1106:0591] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin B routed to IRQ 21
> Region 0: I/O ports at ff00 [size=8]
> Region 1: I/O ports at fe00 [size=4]
> Region 2: I/O ports at fd00 [size=8]
> Region 3: I/O ports at fc00 [size=4]
> Region 4: I/O ports at fb00 [size=16]
> Region 5: I/O ports at f400 [size=256]
> Capabilities: <access denied>
> Kernel driver in use: sata_via
>
> 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07) (prog-if 8a [Master SecP PriP])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
> Latency: 64
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
> Region 4: I/O ports at fa00 [size=16]
> Capabilities: <access denied>
> Kernel driver in use: pata_via
>
> 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 20
> Region 4: I/O ports at f900 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 22
> Region 4: I/O ports at f800 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 21
> Region 4: I/O ports at f700 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin D routed to IRQ 23
> Region 4: I/O ports at f600 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 21
> Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
>
> 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237A PCI to ISA Bridge [1106:3337]
> Subsystem: VIA Technologies, Inc. VT8237A PCI to ISA Bridge [1106:3337]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
>
> 00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e]
> Subsystem: VIA Technologies, Inc. Device [1106:337e]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 64
> Capabilities: <access denied>
>
> 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 7c)
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 23
> Region 0: I/O ports at f200 [size=256]
> Region 1: Memory at dfffe000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: via-rhine
>
> 00:13.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237A Host Bridge [1106:337b] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: dfa00000-dfafffff
> Prefetchable memory behind bridge: 00000000df900000-00000000df9fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8237A PCI to PCI Bridge [1106:337a] (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: df800000-df8fffff
> Prefetchable memory behind bridge: 00000000df700000-00000000df7fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel driver in use: k8temp
>
> 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
> Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
> [virtual] Expansion ROM at de000000 [disabled] [size=64K]
> Capabilities: <access denied>
>
> 04:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
> Subsystem: Micro-Star International Co., Ltd. Device [1462:7253]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at dfafc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
>
> 05:04.0 SCSI storage controller [0100]: Artop Electronic Corp AEC6712UW SCSI [1191:8010] (rev 01)
> Subsystem: Artop Electronic Corp AEC6712UW SCSI [1191:8010]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 254
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at af00 [size=64]
> [virtual] Expansion ROM at df740000 [disabled] [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: atp870u
>
> 05:05.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 30)
> Subsystem: Digital Equipment Corporation DE500B Fast Ethernet [1011:500b]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (5000ns min, 10000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at ae00 [size=128]
> Region 1: Memory at df8ff000 (32-bit, non-prefetchable) [size=128]
> [virtual] Expansion ROM at df700000 [disabled] [size=256K]
> Kernel driver in use: tulip
>
>
> ** USB devices:
> Bus 005 Device 003: ID 08ec:0010 M-Systems Flash Disk Pioneers DiskOnKey
> Bus 005 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 004: ID 045e:005f Microsoft Corp. Wireless MultiMedia Keyboard
> Bus 003 Device 003: ID 0557:7000 ATEN International Co., Ltd Hub
> Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers testing
> APT policy: (900, 'testing'), (500, 'stable'), (400, 'oldstable'), (50, 'unstable')
> Architecture: i386 (x86_64)
>
> Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
> Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
> Shell: /bin/sh linked to /bin/bash
>
> Versions of packages linux-image-2.6.32-5-amd64 depends on:
> ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
> ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
> ii linux-base 2.6.32-15 Linux image base package
> ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.32-5-amd64 recommends:
> ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
> ii libc6-i686 2.10.2-9 GNU C Library: Shared libraries [i
>
> Versions of packages linux-image-2.6.32-5-amd64 suggests:
> pn grub | lilo <none> (no description available)
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-5-amd64 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> pn firmware-iwlwifi <none> (no description available)
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
> pn xen-hypervisor <none> (no description available)
>
> -- debconf information:
> linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
> linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
> linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
> linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
> linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
--
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
next parent reply other threads:[~2010-06-06 21:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100606024158.12393.82960.reportbug@buzz.bailey>
2010-06-06 21:23 ` Ben Hutchings [this message]
2011-08-24 10:39 ` Bug#584724: linux-image-2.6.32-5-amd64: NETDEV WATCHDOG: eth0 (via-rhine): transmit queue 0 timed out Paul Menzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275859426.10677.69.camel@localhost \
--to=ben@decadent.org.uk \
--cc=584724@bugs.debian.org \
--cc=netdev@vger.kernel.org \
--cc=rl@hellgate.ch \
--cc=scott@cartasoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.