From: Gregory Bean <gbean@codeaurora.org>
To: akpm@linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Gregory Bean <gbean@codeaurora.org>,
David Brown <davidb@codeaurora.org>,
Daniel Walker <dwalker@codeaurora.org>,
Bryan Huntsman <bryanh@codeaurora.org>
Subject: [PATCH 2/2] gpio: msm7200a: Add irq support to msm-gpiolib.
Date: Fri, 11 Jun 2010 12:58:52 -0700 [thread overview]
Message-ID: <1276286332-13515-3-git-send-email-gbean@codeaurora.org> (raw)
In-Reply-To: <1276286332-13515-1-git-send-email-gbean@codeaurora.org>
Change-Id: Ib7f7dd05246c87096aabab12eb6cc260551c67cf
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
---
drivers/gpio/msm7200a-gpio.c | 218 +++++++++++++++++++++++++++++++++++++++--
include/linux/msm7200a-gpio.h | 7 ++
2 files changed, 218 insertions(+), 7 deletions(-)
diff --git a/drivers/gpio/msm7200a-gpio.c b/drivers/gpio/msm7200a-gpio.c
index b31c25e..a9ea869 100644
--- a/drivers/gpio/msm7200a-gpio.c
+++ b/drivers/gpio/msm7200a-gpio.c
@@ -23,13 +23,25 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/msm7200a-gpio.h>
+/*
+ * The INT_STATUS register latches both edge- and level-detection events,
+ * which is atypical. Turning on DONT_LATCH_LEVEL_IRQS causes level irq
+ * triggers to be forgotten across mask/unmask calls, emulating a more
+ * traditional setup.
+ */
+#define MSM_GPIO_DONT_LATCH_LEVEL_IRQS 1
+
struct msm_gpio_dev {
struct gpio_chip gpio_chip;
spinlock_t lock;
+ unsigned irq_base;
+ unsigned irq_summary;
struct msm7200a_gpio_regs regs;
};
@@ -119,12 +131,160 @@ static void gpio_chip_set(struct gpio_chip *chip, unsigned offset, int value)
spin_unlock_irqrestore(&msm_gpio->lock, irq_flags);
}
+static int gpio_chip_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct msm_gpio_dev *msm_gpio = TO_MSM_GPIO_DEV(chip);
+ return msm_gpio->irq_base + offset;
+}
+
+#if MSM_GPIO_DONT_LATCH_LEVEL_IRQS
+static inline void forget_level_irq(struct msm_gpio_dev *msm_gpio,
+ unsigned offset)
+{
+ unsigned v = readl(msm_gpio->regs.int_edge);
+ unsigned b = bit(offset);
+
+ if (!(v & b))
+ writel(b, msm_gpio->regs.int_clear);
+
+}
+#else
+static inline void forget_level_irq(struct msm_gpio_dev *msm, unsigned off)
+{
+}
+#endif
+
+static void msm_gpio_irq_mask(unsigned int irq)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_dev *msm_gpio = get_irq_chip_data(irq);
+ unsigned offset = irq - msm_gpio->irq_base;
+
+ spin_lock_irqsave(&msm_gpio->lock, irq_flags);
+ forget_level_irq(msm_gpio, offset);
+ clr_gpio_bit(offset, msm_gpio->regs.int_en);
+ spin_unlock_irqrestore(&msm_gpio->lock, irq_flags);
+}
+
+static void msm_gpio_irq_unmask(unsigned int irq)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_dev *msm_gpio = get_irq_chip_data(irq);
+ unsigned offset = irq - msm_gpio->irq_base;
+
+ spin_lock_irqsave(&msm_gpio->lock, irq_flags);
+ forget_level_irq(msm_gpio, offset);
+ set_gpio_bit(offset, msm_gpio->regs.int_en);
+ spin_unlock_irqrestore(&msm_gpio->lock, irq_flags);
+}
+
+static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned long irq_flags;
+ struct msm_gpio_dev *msm_gpio = get_irq_chip_data(irq);
+ unsigned offset = irq - msm_gpio->irq_base;
+
+ if ((flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING)) ==
+ (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING))
+ return -ENOTSUPP;
+
+ if ((flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) ==
+ (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW))
+ return -ENOTSUPP;
+
+ spin_lock_irqsave(&msm_gpio->lock, irq_flags);
+
+ if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING)) {
+ set_gpio_bit(offset, msm_gpio->regs.int_edge);
+ irq_desc[irq].handle_irq = handle_edge_irq;
+ } else {
+ clr_gpio_bit(offset, msm_gpio->regs.int_edge);
+ irq_desc[irq].handle_irq = handle_level_irq;
+ }
+
+ if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_RISING))
+ set_gpio_bit(offset, msm_gpio->regs.int_pos);
+ else
+ clr_gpio_bit(offset, msm_gpio->regs.int_pos);
+
+ spin_unlock_irqrestore(&msm_gpio->lock, irq_flags);
+
+ return 0;
+}
+
+static void msm_gpio_irq_mask_ack(unsigned int irq)
+{
+ msm_gpio_irq_mask(irq);
+}
+
+static int msm_gpio_irq_set_affinity(unsigned int irq,
+ const struct cpumask *dest)
+{
+ return -ENOTSUPP;
+}
+
+static int msm_gpio_irq_retrigger(unsigned int irq)
+{
+ return -ENOTSUPP;
+}
+
+static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ return -ENOTSUPP;
+}
+
+static irqreturn_t msm_gpio_irq_handler(int irq, void *dev)
+{
+ unsigned long irq_flags;
+ int b, m;
+ unsigned e, s, v;
+
+ struct msm_gpio_dev *msm_gpio = (struct msm_gpio_dev *)dev;
+
+ /*
+ * The int_status register latches trigger events whether or not
+ * the gpio line is enabled as an interrupt source. Therefore,
+ * the set of pins which defines the interrupts which need to fire
+ * is the intersection of int_status and int_en - int_status
+ * alone provides an incomplete picture.
+ */
+ spin_lock_irqsave(&msm_gpio->lock, irq_flags);
+ s = readl(msm_gpio->regs.int_status);
+ e = readl(msm_gpio->regs.int_en);
+ v = s & e;
+ if (v)
+ writel(v, msm_gpio->regs.int_clear);
+ spin_unlock_irqrestore(&msm_gpio->lock, irq_flags);
+
+ if (!v)
+ return IRQ_NONE;
+
+ while (v) {
+ m = v & -v;
+ b = fls(m) - 1;
+ v &= ~m;
+ generic_handle_irq(msm_gpio->irq_base + b);
+ }
+ return IRQ_HANDLED;
+}
+
+static struct irq_chip msm_gpio_irq_chip = {
+ .name = "msm_gpio",
+ .mask = msm_gpio_irq_mask,
+ .mask_ack = msm_gpio_irq_mask_ack,
+ .unmask = msm_gpio_irq_unmask,
+ .set_affinity = msm_gpio_irq_set_affinity,
+ .retrigger = msm_gpio_irq_retrigger,
+ .set_type = msm_gpio_irq_set_type,
+ .set_wake = msm_gpio_irq_set_wake,
+};
+
static int msm_gpio_probe(struct platform_device *dev)
{
struct msm_gpio_dev *msm_gpio;
struct msm7200a_gpio_platform_data *pdata =
(struct msm7200a_gpio_platform_data *)dev->dev.platform_data;
- int ret;
+ int i, irq, ret;
if (!pdata)
return -EINVAL;
@@ -146,13 +306,53 @@ static int msm_gpio_probe(struct platform_device *dev)
msm_gpio->gpio_chip.direction_output = gpio_chip_direction_output;
msm_gpio->gpio_chip.get = gpio_chip_get;
msm_gpio->gpio_chip.set = gpio_chip_set;
+ msm_gpio->gpio_chip.to_irq = gpio_chip_to_irq;
+ msm_gpio->irq_base = pdata->irq_base;
+ msm_gpio->irq_summary = pdata->irq_summary;
ret = gpiochip_add(&msm_gpio->gpio_chip);
if (ret < 0)
- goto err;
+ goto err_post_malloc;
+
+ for (i = 0; i < msm_gpio->gpio_chip.ngpio; ++i) {
+ irq = msm_gpio->irq_base + i;
+ set_irq_chip_data(irq, msm_gpio);
+ set_irq_chip(irq, &msm_gpio_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ /*
+ * We use a level-triggered interrupt because of the nature
+ * of the shared GPIO-group interrupt.
+ *
+ * Many GPIO chips may be sharing the same group IRQ line, and
+ * it is possible for GPIO interrupt to re-occur while the system
+ * is still servicing the group interrupt associated with it.
+ * The group IRQ line would not de-assert and re-assert, and
+ * we'd get no second edge to cause the group IRQ to be handled again.
+ *
+ * Using a level interrupt guarantees that the group IRQ handlers
+ * will continue to be called as long as any GPIO chip in the group
+ * is asserting, even if the condition began while the group
+ * handler was in mid-pass.
+ */
+ ret = request_irq(msm_gpio->irq_summary,
+ msm_gpio_irq_handler,
+ IRQF_SHARED | IRQF_TRIGGER_HIGH,
+ dev->name,
+ msm_gpio);
+ if (ret < 0)
+ goto err_post_gpiochip_add;
return ret;
-err:
+err_post_gpiochip_add:
+ /*
+ * Under no circumstances should a line be held on a gpiochip
+ * which hasn't finished probing.
+ */
+ BUG_ON(gpiochip_remove(&msm_gpio->gpio_chip) < 0);
+err_post_malloc:
kfree(msm_gpio);
return ret;
}
@@ -160,12 +360,16 @@ err:
static int msm_gpio_remove(struct platform_device *dev)
{
struct msm_gpio_dev *msm_gpio = platform_get_drvdata(dev);
- int ret = gpiochip_remove(&msm_gpio->gpio_chip);
+ int ret;
- if (ret == 0)
- kfree(msm_gpio);
+ ret = gpiochip_remove(&msm_gpio->gpio_chip);
+ if (ret < 0)
+ return ret;
- return ret;
+ free_irq(msm_gpio->irq_summary, msm_gpio);
+ kfree(msm_gpio);
+
+ return 0;
}
static struct platform_driver msm_gpio_driver = {
diff --git a/include/linux/msm7200a-gpio.h b/include/linux/msm7200a-gpio.h
index 3f1ef38..7af4dd6 100644
--- a/include/linux/msm7200a-gpio.h
+++ b/include/linux/msm7200a-gpio.h
@@ -33,11 +33,18 @@ struct msm7200a_gpio_regs {
void __iomem *in;
void __iomem *out;
void __iomem *oe;
+ void __iomem *int_status;
+ void __iomem *int_clear;
+ void __iomem *int_en;
+ void __iomem *int_edge;
+ void __iomem *int_pos;
};
struct msm7200a_gpio_platform_data {
unsigned gpio_base;
unsigned ngpio;
+ unsigned irq_base;
+ unsigned irq_summary;
struct msm7200a_gpio_regs regs;
};
--
1.7.0.4
---
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2010-06-11 19:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-11 19:58 [PATCH 0/2] Add gpiolib support for MSM chips Gregory Bean
2010-06-11 19:58 ` [PATCH 1/2] gpio: msm7200a: " Gregory Bean
2010-06-12 2:12 ` Ben Dooks
2010-06-12 2:34 ` Bryan Huntsman
2010-06-12 5:37 ` Gregory Bean
2010-06-13 5:30 ` Ben Dooks
2010-06-11 19:58 ` Gregory Bean [this message]
2010-06-11 23:12 ` [PATCH 2/2] gpio: msm7200a: Add irq support to msm-gpiolib Daniel Walker
2010-06-11 23:23 ` Greg Bean
2010-06-12 2:24 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1276286332-13515-3-git-send-email-gbean@codeaurora.org \
--to=gbean@codeaurora.org \
--cc=akpm@linux-foundation.org \
--cc=bryanh@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=dwalker@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.