All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory Bean <gbean@codeaurora.org>
To: dwalker@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Gregory Bean <gbean@codeaurora.org>
Subject: [PATCH 3/3] msm: 8x50: add gpio device configuration.
Date: Fri, 18 Jun 2010 12:12:55 -0700	[thread overview]
Message-ID: <1276888375-13221-4-git-send-email-gbean@codeaurora.org> (raw)
In-Reply-To: <1276888375-13221-1-git-send-email-gbean@codeaurora.org>

Add device configuration and board-init for gpio support on the QSD8x50.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
---
 arch/arm/mach-msm/board-qsd8x50.c   |   29 +++++++++++++++++++++++++++--
 arch/arm/mach-msm/devices-qsd8x50.c |   23 +++++++++++++++++++++++
 2 files changed, 50 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index e3cc807..9137002 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -40,7 +40,31 @@ static struct msm_gpio uart3_config_data[] = {
 	{ GPIO_CFG(87, 1, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
 };
 
-static struct platform_device *devices[] __initdata = {
+/*
+ * Early devices are those which provide a system service which will be
+ * required by one or more of the function calls in qsd8x50_init.
+ * These devices must be probed and online first in order for
+ * the init routine to run successfully.
+ */
+static struct platform_device *early_devices[] __initdata = {
+#ifdef CONFIG_GPIOLIB
+	&msm_gpio_devices[0],
+	&msm_gpio_devices[1],
+	&msm_gpio_devices[2],
+	&msm_gpio_devices[3],
+	&msm_gpio_devices[4],
+	&msm_gpio_devices[5],
+	&msm_gpio_devices[6],
+	&msm_gpio_devices[7],
+#endif
+};
+
+/*
+ * Late devices are those which are dependent upon services initialized
+ * by qsd8x50_init, or which simply have no dependents and can have
+ * their initialization deferred.
+ */
+static struct platform_device *late_devices[] __initdata = {
 	&msm_device_uart3,
 };
 
@@ -64,8 +88,9 @@ static void __init qsd8x50_init_irq(void)
 
 static void __init qsd8x50_init(void)
 {
+	platform_add_devices(early_devices, ARRAY_SIZE(early_devices));
 	msm8x50_init_uart3();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 4d4a507..b9f692e 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -90,3 +90,26 @@ struct clk msm_clocks_8x50[] = {
 
 unsigned msm_num_clocks_8x50 = ARRAY_SIZE(msm_clocks_8x50);
 
+#ifdef CONFIG_GPIOLIB
+static struct msm7200a_gpio_platform_data gpio_platform_data[] = {
+	MSM7200A_GPIO_PLATFORM_DATA(0,   0,  15, INT_GPIO_GROUP1),
+	MSM7200A_GPIO_PLATFORM_DATA(1,  16,  42, INT_GPIO_GROUP2),
+	MSM7200A_GPIO_PLATFORM_DATA(2,  43,  67, INT_GPIO_GROUP1),
+	MSM7200A_GPIO_PLATFORM_DATA(3,  68,  94, INT_GPIO_GROUP1),
+	MSM7200A_GPIO_PLATFORM_DATA(4,  95, 103, INT_GPIO_GROUP1),
+	MSM7200A_GPIO_PLATFORM_DATA(5, 104, 121, INT_GPIO_GROUP1),
+	MSM7200A_GPIO_PLATFORM_DATA(6, 122, 152, INT_GPIO_GROUP1),
+	MSM7200A_GPIO_PLATFORM_DATA(7, 153, 164, INT_GPIO_GROUP1),
+};
+
+struct platform_device msm_gpio_devices[] = {
+	MSM7200A_GPIO_DEVICE(0, gpio_platform_data),
+	MSM7200A_GPIO_DEVICE(1, gpio_platform_data),
+	MSM7200A_GPIO_DEVICE(2, gpio_platform_data),
+	MSM7200A_GPIO_DEVICE(3, gpio_platform_data),
+	MSM7200A_GPIO_DEVICE(4, gpio_platform_data),
+	MSM7200A_GPIO_DEVICE(5, gpio_platform_data),
+	MSM7200A_GPIO_DEVICE(6, gpio_platform_data),
+	MSM7200A_GPIO_DEVICE(7, gpio_platform_data),
+};
+#endif
-- 
1.7.0.4

--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

  parent reply	other threads:[~2010-06-18 19:13 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-18 19:12 [PATCH 0/3] msm: Add gpiolib devices to MSM7x30 and QSD8x50 Gregory Bean
2010-06-18 19:12 ` [PATCH 1/3] msm: Add gpio register address mapping information Gregory Bean
2010-06-19 20:02   ` Pavel Machek
2010-06-21 17:03     ` Bryan Huntsman
2010-06-21 17:18       ` Alan Cox
2010-06-21 17:28         ` Bryan Huntsman
2010-06-21 19:08           ` Alan Cox
2010-06-21 17:51         ` Daniel Walker
2010-06-21 17:27       ` Pavel Machek
2010-06-18 19:12 ` [PATCH 2/3] msm: 7x30: Add gpio device configuration Gregory Bean
2010-06-18 19:12 ` Gregory Bean [this message]
2010-06-18 21:59   ` [PATCH 3/3] msm: 8x50: add " Daniel Walker
2010-06-18 19:26 ` [PATCH 0/3] msm: Add gpiolib devices to MSM7x30 and QSD8x50 Daniel Walker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1276888375-13221-4-git-send-email-gbean@codeaurora.org \
    --to=gbean@codeaurora.org \
    --cc=dwalker@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.