All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 03/23] scsi: scsi_bus_legacy_handle_cmdline() can fail, fix callers
Date: Fri,  2 Jul 2010 18:38:12 +0200	[thread overview]
Message-ID: <1278088712-12302-4-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1278088712-12302-1-git-send-email-kwolf@redhat.com>

From: Markus Armbruster <armbru@redhat.com>

None of its callers checks for failure.  scsi_hot_add() can crash
because of that:

(qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1
scsi-generic: scsi generic interface too old
Segmentation fault (core dumped)

Fix all callers, not just scsi_hot_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 hw/esp.c         |    3 +--
 hw/lsi53c895a.c  |    2 +-
 hw/pci-hotplug.c |    3 +++
 hw/scsi-bus.c    |   11 +++++++----
 hw/scsi.h        |    2 +-
 hw/usb-msd.c     |    3 +++
 6 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/hw/esp.c b/hw/esp.c
index 7740879..349052a 100644
--- a/hw/esp.c
+++ b/hw/esp.c
@@ -679,8 +679,7 @@ static int esp_init1(SysBusDevice *dev)
     qdev_init_gpio_in(&dev->qdev, parent_esp_reset, 1);
 
     scsi_bus_new(&s->bus, &dev->qdev, 0, ESP_MAX_DEVS, esp_command_complete);
-    scsi_bus_legacy_handle_cmdline(&s->bus);
-    return 0;
+    return scsi_bus_legacy_handle_cmdline(&s->bus);
 }
 
 static SysBusDeviceInfo esp_info = {
diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index 9a37fed..1bb1caf 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -2176,7 +2176,7 @@ static int lsi_scsi_init(PCIDevice *dev)
 
     scsi_bus_new(&s->bus, &dev->qdev, 1, LSI_MAX_DEVS, lsi_command_complete);
     if (!dev->qdev.hotplugged) {
-        scsi_bus_legacy_handle_cmdline(&s->bus);
+        return scsi_bus_legacy_handle_cmdline(&s->bus);
     }
     return 0;
 }
diff --git a/hw/pci-hotplug.c b/hw/pci-hotplug.c
index c39e640..55c9fe3 100644
--- a/hw/pci-hotplug.c
+++ b/hw/pci-hotplug.c
@@ -90,6 +90,9 @@ static int scsi_hot_add(Monitor *mon, DeviceState *adapter,
      */
     dinfo->unit = qemu_opt_get_number(dinfo->opts, "unit", -1);
     scsidev = scsi_bus_legacy_add_drive(scsibus, dinfo, dinfo->unit);
+    if (!scsidev) {
+        return -1;
+    }
     dinfo->unit = scsidev->id;
 
     if (printinfo)
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 24bd060..d5b66c1 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -83,7 +83,6 @@ void scsi_qdev_register(SCSIDeviceInfo *info)
 }
 
 /* handle legacy '-drive if=scsi,...' cmd line args */
-/* FIXME callers should check for failure, but don't */
 SCSIDevice *scsi_bus_legacy_add_drive(SCSIBus *bus, DriveInfo *dinfo, int unit)
 {
     const char *driver;
@@ -98,18 +97,22 @@ SCSIDevice *scsi_bus_legacy_add_drive(SCSIBus *bus, DriveInfo *dinfo, int unit)
     return DO_UPCAST(SCSIDevice, qdev, dev);
 }
 
-void scsi_bus_legacy_handle_cmdline(SCSIBus *bus)
+int scsi_bus_legacy_handle_cmdline(SCSIBus *bus)
 {
     DriveInfo *dinfo;
-    int unit;
+    int res = 0, unit;
 
     for (unit = 0; unit < MAX_SCSI_DEVS; unit++) {
         dinfo = drive_get(IF_SCSI, bus->busnr, unit);
         if (dinfo == NULL) {
             continue;
         }
-        scsi_bus_legacy_add_drive(bus, dinfo, unit);
+        if (!scsi_bus_legacy_add_drive(bus, dinfo, unit)) {
+            res = -1;
+            break;
+        }
     }
+    return res;
 }
 
 void scsi_dev_clear_sense(SCSIDevice *dev)
diff --git a/hw/scsi.h b/hw/scsi.h
index b668e27..b1b5f73 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -98,7 +98,7 @@ static inline SCSIBus *scsi_bus_from_device(SCSIDevice *d)
 }
 
 SCSIDevice *scsi_bus_legacy_add_drive(SCSIBus *bus, DriveInfo *dinfo, int unit);
-void scsi_bus_legacy_handle_cmdline(SCSIBus *bus);
+int scsi_bus_legacy_handle_cmdline(SCSIBus *bus);
 
 void scsi_dev_clear_sense(SCSIDevice *dev);
 void scsi_dev_set_sense(SCSIDevice *dev, uint8_t key);
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index 003bd8a..8e9718c 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -531,6 +531,9 @@ static int usb_msd_initfn(USBDevice *dev)
     s->dev.speed = USB_SPEED_FULL;
     scsi_bus_new(&s->bus, &s->dev.qdev, 0, 1, usb_msd_command_complete);
     s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, s->conf.dinfo, 0);
+    if (!s->scsi_dev) {
+        return -1;
+    }
     s->bus.qbus.allow_hotplug = 0;
     usb_msd_handle_reset(dev);
 
-- 
1.6.6.1

  parent reply	other threads:[~2010-07-02 16:38 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-02 16:38 [Qemu-devel] [PULL 00/23] Block patches Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 01/23] qcow2: Fix error handling during metadata preallocation Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 02/23] block: allow filenames with colons again for host devices Kevin Wolf
2010-07-02 16:38 ` Kevin Wolf [this message]
2010-07-02 16:38 ` [Qemu-devel] [PATCH 04/23] ide: Make it explicit that ide_create_drive() can't fail Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 05/23] blockdev: Remove drive_get_serial() Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 06/23] Don't reset bs->is_temporary in bdrv_open_common Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 07/23] blockdev: New drive_get_by_blockdev() Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 08/23] blockdev: Clean up automatic drive deletion Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 09/23] qdev: Decouple qdev_prop_drive from DriveInfo Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 10/23] blockdev: drive_get_by_id() is no longer used, remove Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 11/23] block: Catch attempt to attach multiple devices to a blockdev Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 12/23] qemu-option: New qemu_opts_reset() Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 13/23] blkdebug: Fix set_state_opts definition Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 14/23] blkdebug: Free QemuOpts after having read the config Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 15/23] blkdebug: Initialize state as 1 Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 16/23] savevm: Survive hot-unplug of snapshot device Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 17/23] block: Clean up bdrv_snapshots() Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 18/23] block: Fix virtual media change for if=none Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 19/23] ide: Make PIIX and ISA IDE init functions return the qdev Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 20/23] pc: Fix CMOS info for drives defined with -device Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 21/23] qemu-img: avoid calling exit(1) to release resources properly Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 22/23] block: Fix early failure in multiwrite Kevin Wolf
2010-07-02 16:38 ` [Qemu-devel] [PATCH 23/23] block: Handle multiwrite errors only when all requests have completed Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1278088712-12302-4-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.