From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: marcel@holtmann.org, gustavo@padovan.org,
rshaffer@codeaurora.org, linux-arm-msm@vger.kernel.org,
Mat Martineau <mathewm@codeaurora.org>
Subject: [PATCH 7/9] Bluetooth: Use common SOCK_STREAM receive code in RFCOMM.
Date: Wed, 4 Aug 2010 15:49:04 -0700 [thread overview]
Message-ID: <1280962146-22604-8-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1280962146-22604-1-git-send-email-mathewm@codeaurora.org>
To reduce code duplication, have rfcomm_sock_recvmsg() call
bt_sock_stream_recvmsg(). The common bt_sock_stream_recvmsg()
code is nearly identical, with the RFCOMM-specific functionality
for deferred setup and connection unthrottling left in
rfcomm_sock_recvmsg().
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/rfcomm/sock.c | 104 +++----------------------------------------
1 files changed, 6 insertions(+), 98 deletions(-)
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 44a6232..4396f47 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -617,121 +617,29 @@ static int rfcomm_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
return sent;
}
-static long rfcomm_sock_data_wait(struct sock *sk, long timeo)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(sk_sleep(sk), &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (!skb_queue_empty(&sk->sk_receive_queue) ||
- sk->sk_err ||
- (sk->sk_shutdown & RCV_SHUTDOWN) ||
- signal_pending(current) ||
- !timeo)
- break;
-
- set_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
- release_sock(sk);
- timeo = schedule_timeout(timeo);
- lock_sock(sk);
- clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
- }
-
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(sk_sleep(sk), &wait);
- return timeo;
-}
-
static int rfcomm_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t size, int flags)
{
struct sock *sk = sock->sk;
struct rfcomm_dlc *d = rfcomm_pi(sk)->dlc;
- int err = 0;
- size_t target, copied = 0;
- long timeo;
+ int len;
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
- if (flags & MSG_OOB)
- return -EOPNOTSUPP;
-
- msg->msg_namelen = 0;
-
- BT_DBG("sk %p size %zu", sk, size);
+ len = bt_sock_stream_recvmsg(iocb, sock, msg, size, flags);
lock_sock(sk);
+ if (!(flags & MSG_PEEK) && len > 0)
+ atomic_sub(len, &sk->sk_rmem_alloc);
- target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
- timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
-
- do {
- struct sk_buff *skb;
- int chunk;
-
- skb = skb_dequeue(&sk->sk_receive_queue);
- if (!skb) {
- if (copied >= target)
- break;
-
- if ((err = sock_error(sk)) != 0)
- break;
- if (sk->sk_shutdown & RCV_SHUTDOWN)
- break;
-
- err = -EAGAIN;
- if (!timeo)
- break;
-
- timeo = rfcomm_sock_data_wait(sk, timeo);
-
- if (signal_pending(current)) {
- err = sock_intr_errno(timeo);
- goto out;
- }
- continue;
- }
-
- chunk = min_t(unsigned int, skb->len, size);
- if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) {
- skb_queue_head(&sk->sk_receive_queue, skb);
- if (!copied)
- copied = -EFAULT;
- break;
- }
- copied += chunk;
- size -= chunk;
-
- sock_recv_ts_and_drops(msg, sk, skb);
-
- if (!(flags & MSG_PEEK)) {
- atomic_sub(chunk, &sk->sk_rmem_alloc);
-
- skb_pull(skb, chunk);
- if (skb->len) {
- skb_queue_head(&sk->sk_receive_queue, skb);
- break;
- }
- kfree_skb(skb);
-
- } else {
- /* put message back and return */
- skb_queue_head(&sk->sk_receive_queue, skb);
- break;
- }
- } while (size);
-
-out:
if (atomic_read(&sk->sk_rmem_alloc) <= (sk->sk_rcvbuf >> 2))
rfcomm_dlc_unthrottle(rfcomm_pi(sk)->dlc);
-
release_sock(sk);
- return copied ? : err;
+
+ return len;
}
static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
next prev parent reply other threads:[~2010-08-04 22:49 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-04 22:48 [PATCH v2 0/9] Bluetooth: L2CAP updates for PSM validation and ERTM Mat Martineau
2010-08-04 22:48 ` [PATCH 1/9] Bluetooth: Only enable for L2CAP FCS for ERTM or streaming Mat Martineau
2010-08-05 3:32 ` Gustavo F. Padovan
2010-08-05 16:27 ` Mat Martineau
2010-08-05 3:38 ` Gustavo F. Padovan
2010-08-04 22:48 ` [PATCH 2/9] Bluetooth: Change default ERTM retransmit timeout Mat Martineau
2010-08-05 3:29 ` Gustavo F. Padovan
2010-08-05 15:53 ` Mat Martineau
2010-08-04 22:49 ` [PATCH 3/9] Bluetooth: Validate PSM values in calls to connect() and bind() Mat Martineau
2010-08-04 22:49 ` [PATCH 4/9] Bluetooth: Fix endianness issue with L2CAP MPS configuration Mat Martineau
2010-08-05 4:00 ` Gustavo F. Padovan
2010-08-05 16:50 ` Mat Martineau
2010-08-04 22:49 ` [PATCH 5/9] Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Mat Martineau
2010-08-05 4:20 ` Gustavo F. Padovan
2010-08-05 16:54 ` Mat Martineau
2010-08-04 22:49 ` [PATCH 6/9] Bluetooth: Add common code for stream-oriented recvmsg() Mat Martineau
2010-08-04 22:49 ` Mat Martineau [this message]
2010-08-04 22:49 ` [PATCH 8/9] Bluetooth: Use a stream-oriented recvmsg with SOCK_STREAM L2CAP sockets Mat Martineau
2010-08-04 22:49 ` [PATCH 9/9] Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Mat Martineau
-- strict thread matches above, loose matches on Subject: below --
2010-08-05 22:54 [PATCH v3 0/9] Bluetooth: L2CAP updates for PSM validation and ERTM Mat Martineau
2010-08-05 22:54 ` [PATCH 7/9] Bluetooth: Use common SOCK_STREAM receive code in RFCOMM Mat Martineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280962146-22604-8-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=gustavo@padovan.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=rshaffer@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.