From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: hw-breakpoint: add new ptrace requests for hw-breakpoint interaction
Date: Tue, 10 Aug 2010 14:10:57 +0100 [thread overview]
Message-ID: <1281445858-4753-4-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1281445858-4753-3-git-send-email-will.deacon@arm.com>
For debuggers to take advantage of the hw-breakpoint framework in the kernel,
it is necessary to expose the API calls via a ptrace interface.
This patch exposes the hardware breakpoints framework as a collection of
virtual registers, accesible using PTRACE_SETHBPREGS and PTRACE_GETHBPREGS
requests. The breakpoints are stored in the debug_info struct of the running
thread.
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: S. Karthikeyan <informkarthik@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
arch/arm/include/asm/processor.h | 4 +
arch/arm/include/asm/ptrace.h | 2 +
arch/arm/kernel/hw_breakpoint.c | 13 +++
arch/arm/kernel/ptrace.c | 223 ++++++++++++++++++++++++++++++++++++++
4 files changed, 242 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 7bed3da..67357ba 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -19,6 +19,7 @@
#ifdef __KERNEL__
+#include <asm/hw_breakpoint.h>
#include <asm/ptrace.h>
#include <asm/types.h>
@@ -41,6 +42,9 @@ struct debug_entry {
struct debug_info {
int nsaved;
struct debug_entry bp[2];
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ struct perf_event *hbp[ARM_MAX_HBP_SLOTS];
+#endif
};
struct thread_struct {
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 9dcb11e..21560e4 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -29,6 +29,8 @@
#define PTRACE_SETCRUNCHREGS 26
#define PTRACE_GETVFPREGS 27
#define PTRACE_SETVFPREGS 28
+#define PTRACE_GETHBPREGS 29
+#define PTRACE_SETHBPREGS 30
/*
* PSR bits
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 9fe8843..d36ff92 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -674,6 +674,19 @@ out:
return ret;
}
+static int hw_breakpoint_thread_notify(struct notifier_block *self,
+ unsigned long cmd, void *t)
+{
+ if (cmd == THREAD_NOTIFY_FLUSH)
+ flush_ptrace_hw_breakpoint(current);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block hw_breakpoint_thread_notifier_block = {
+ .notifier_call = hw_breakpoint_thread_notify,
+};
+
/*
* One-time initialisation.
*/
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3f562a7..c442941 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -19,6 +19,8 @@
#include <linux/init.h>
#include <linux/signal.h>
#include <linux/uaccess.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -751,6 +753,216 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
}
#endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+/*
+ * Convert a virtual register number into an index for a thread_info
+ * breakpoint array. Breakpoints are identified using positive numbers
+ * whilst watchpoints are negative. The registers are laid out as pairs
+ * of (address, control), each pair mapping to a unique hw_breakpoint struct.
+ * Register 0 is reserved for describing resource information.
+ */
+static int ptrace_hbp_num_to_idx(long num)
+{
+ if (num < 0)
+ num = (ARM_MAX_BRP << 1) - num;
+ return (num - 1) >> 1;
+}
+
+/*
+ * Returns the virtual register number for the address of the
+ * breakpoint at index idx.
+ */
+static long ptrace_hbp_idx_to_num(int idx)
+{
+ long mid = ARM_MAX_BRP << 1;
+ long num = (idx << 1) + 1;
+ return num > mid ? mid - num : num;
+}
+
+/*
+ * Handle hitting a HW-breakpoint.
+ */
+static void ptrace_hbptriggered(struct perf_event *bp, int unused,
+ struct perf_sample_data *data,
+ struct pt_regs *regs)
+{
+ struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
+ long num;
+ int i;
+ siginfo_t info;
+
+ for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i)
+ if (current->thread.debug.hbp[i] == bp)
+ break;
+
+ num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i);
+
+ info.si_signo = SIGTRAP;
+ info.si_errno = (int)num;
+ info.si_code = TRAP_HWBKPT;
+ info.si_addr = (void __user *)(bkpt->trigger);
+
+ force_sig_info(SIGTRAP, &info, current);
+}
+
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+ int i;
+ struct thread_struct *t = &tsk->thread;
+
+ for (i = 0; i < ARM_MAX_HBP_SLOTS; i++) {
+ unregister_hw_breakpoint(t->debug.hbp[i]);
+ t->debug.hbp[i] = NULL;
+ }
+}
+
+static u32 ptrace_get_hbp_resource_info(void)
+{
+ u8 num_brps, num_wrps, debug_arch, wp_len;
+ u32 reg = 0;
+
+ num_brps = hw_breakpoint_slots(TYPE_INST);
+ num_wrps = hw_breakpoint_slots(TYPE_DATA);
+ debug_arch = arch_get_debug_arch();
+ wp_len = arch_get_max_wp_len();
+
+ reg |= debug_arch;
+ reg <<= 8;
+ reg |= wp_len;
+ reg <<= 8;
+ reg |= num_wrps;
+ reg <<= 8;
+ reg |= num_brps;
+
+ return reg;
+}
+
+static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type)
+{
+ struct perf_event_attr attr;
+
+ ptrace_breakpoint_init(&attr);
+
+ /* Initialise fields to sane defaults. */
+ attr.bp_addr = 0;
+ attr.bp_len = HW_BREAKPOINT_LEN_4;
+ attr.bp_type = type;
+ attr.disabled = 1;
+
+ return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, tsk);
+}
+
+static int ptrace_gethbpregs(struct task_struct *tsk, long num,
+ unsigned long __user *data)
+{
+ u32 reg;
+ int idx, ret = 0;
+ struct perf_event *bp;
+ struct arch_hw_breakpoint_ctrl arch_ctrl;
+
+ if (num == 0) {
+ reg = ptrace_get_hbp_resource_info();
+ } else {
+ idx = ptrace_hbp_num_to_idx(num);
+ if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ bp = tsk->thread.debug.hbp[idx];
+ if (!bp) {
+ reg = 0;
+ goto put;
+ }
+
+ arch_ctrl = counter_arch_bp(bp)->ctrl;
+
+ /*
+ * Fix up the len because we may have adjusted it
+ * to compensate for an unaligned address.
+ */
+ while (!(arch_ctrl.len & 0x1))
+ arch_ctrl.len >>= 1;
+
+ if (idx & 0x1)
+ reg = encode_ctrl_reg(arch_ctrl);
+ else
+ reg = bp->attr.bp_addr;
+ }
+
+put:
+ if (put_user(reg, data))
+ ret = -EFAULT;
+
+out:
+ return ret;
+}
+
+static int ptrace_sethbpregs(struct task_struct *tsk, long num,
+ unsigned long __user *data)
+{
+ int idx, gen_len, gen_type, implied_type, ret = 0;
+ u32 user_val;
+ struct perf_event *bp;
+ struct arch_hw_breakpoint_ctrl ctrl;
+ struct perf_event_attr attr;
+
+ if (num == 0)
+ goto out;
+ else if (num < 0)
+ implied_type = HW_BREAKPOINT_RW;
+ else
+ implied_type = HW_BREAKPOINT_X;
+
+ idx = ptrace_hbp_num_to_idx(num);
+ if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (get_user(user_val, data)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ bp = tsk->thread.debug.hbp[idx];
+ if (!bp) {
+ bp = ptrace_hbp_create(tsk, implied_type);
+ if (IS_ERR(bp)) {
+ ret = PTR_ERR(bp);
+ goto out;
+ }
+ tsk->thread.debug.hbp[idx] = bp;
+ }
+
+ attr = bp->attr;
+
+ if (num & 0x1) {
+ /* Address */
+ attr.bp_addr = user_val;
+ } else {
+ /* Control */
+ decode_ctrl_reg(user_val, &ctrl);
+ ret = arch_bp_generic_fields(ctrl, &gen_len, &gen_type);
+ if (ret)
+ goto out;
+
+ if ((gen_type & implied_type) != gen_type) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ attr.bp_len = gen_len;
+ attr.bp_type = gen_type;
+ attr.disabled = !ctrl.enabled;
+ }
+
+ ret = modify_user_hw_breakpoint(bp, &attr);
+out:
+ return ret;
+}
+#endif
+
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
@@ -820,6 +1032,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
break;
#endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ case PTRACE_GETHBPREGS:
+ ret = ptrace_gethbpregs(child, addr,
+ (unsigned long __user *)data);
+ break;
+ case PTRACE_SETHBPREGS:
+ ret = ptrace_sethbpregs(child, addr,
+ (unsigned long __user *)data);
+ break;
+#endif
+
default:
ret = ptrace_request(child, request, addr, data);
break;
--
1.6.3.3
next prev parent reply other threads:[~2010-08-10 13:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-10 13:10 [PATCH 0/4] ARM: add support for hw-breakpoints [v5] Will Deacon
2010-08-10 13:10 ` [PATCH 1/4] ARM: hw-breakpoint: add mechanism for hooking into prefetch aborts Will Deacon
2010-08-10 13:10 ` [PATCH 2/4] ARM: hw-breakpoint: add ARM backend for the hw-breakpoint framework Will Deacon
2010-08-10 13:10 ` Will Deacon [this message]
2010-08-10 13:10 ` [PATCH 4/4] ARM: hw-breakpoint: add HAVE_HW_BREAKPOINT to Kconfig Will Deacon
-- strict thread matches above, loose matches on Subject: below --
2010-08-23 15:54 [PATCH 0/4] ARM: add support for hw-breakpoints [v6] Will Deacon
2010-08-23 15:54 ` [PATCH 1/4] ARM: hw-breakpoint: add mechanism for hooking into prefetch aborts Will Deacon
2010-08-23 15:54 ` [PATCH 2/4] ARM: hw-breakpoint: add ARM backend for the hw-breakpoint framework Will Deacon
2010-08-23 15:54 ` [PATCH 3/4] ARM: hw-breakpoint: add new ptrace requests for hw-breakpoint interaction Will Deacon
2010-07-07 16:22 [PATCH 0/4] ARM: add support for hw-breakpoints [v4] Will Deacon
2010-07-07 16:22 ` [PATCH 1/4] ARM: hw-breakpoint: add mechanism for hooking into prefetch aborts Will Deacon
2010-07-07 16:22 ` [PATCH 2/4] ARM: hw-breakpoint: add ARM backend for the hw-breakpoint framework Will Deacon
2010-07-07 16:22 ` [PATCH 3/4] ARM: hw-breakpoint: add new ptrace requests for hw-breakpoint interaction Will Deacon
2010-06-10 14:59 [RFC PATCH 0/4] ARM: add support for hw-breakpoints [v3] Will Deacon
2010-06-10 14:59 ` [PATCH 1/4] ARM: hw-breakpoint: add mechanism for hooking into prefetch aborts Will Deacon
2010-06-10 14:59 ` [PATCH 2/4] ARM: hw-breakpoint: add ARM backend for the hw-breakpoint framework Will Deacon
2010-06-10 14:59 ` [PATCH 3/4] ARM: hw-breakpoint: add new ptrace requests for hw-breakpoint interaction Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281445858-4753-4-git-send-email-will.deacon@arm.com \
--to=will.deacon@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.