All of lore.kernel.org
 help / color / mirror / Atom feed
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
To: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: 'Sneha Narnakaje' <nsnehaprabha@ti.com>,
	davinci-linux-open-source@linux.davincidsp.com,
	linux-mtd@lists.infradead.org,
	'Wolfram Sang' <w.sang@pengutronix.de>
Subject: RE: [RFC] nand/davinci: Fix comment to match the code
Date: Wed, 25 Aug 2010 15:55:06 +0300	[thread overview]
Message-ID: <1282740906.24044.210.camel@localhost> (raw)
In-Reply-To: <039d01cb4450$e8f7d6a0$bae783e0$@raj@ti.com>

On Wed, 2010-08-25 at 17:57 +0530, Sudhakar Rajashekhara wrote:
> > --- a/drivers/mtd/nand/davinci_nand.c
> > +++ b/drivers/mtd/nand/davinci_nand.c
> > @@ -369,8 +369,9 @@ compare:
> >  	 * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
> >  	 * begin trying to poll for the state, you may fall right out of your
> >  	 * loop without any of the correction calculations having taken place.
> > -	 * The recommendation from the hardware team is to wait till ECC_STATE
> > -	 * reads less than 4, which means ECC HW has entered correction state.
> > +	 * The recommendation from the hardware team is to initially delay as
> > +	 * long as ECC_STATE reads less than 4. After that, ECC HW has entered
> > +	 * correction state.
> >  	 */
> >  	do {
> >  		ecc_state = (davinci_nand_readl(info,
> > -- 
> 
> Thanks for pointing this out, but I have already corrected this and submitted
> the patch. Artem Bityutskity has pushed this patch to his l2-mtd-2.6 / master
> tree.

If you mean

commit 1c3275b656045aff9a75bb2c9f3251af1043ebb3
Author: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date:   Tue Jul 20 15:24:01 2010 -0700

    mtd: nand: davinci: correct 4-bit error correction
    
    On TI's DA830/OMAP-L137, DA850/OMAP-L138 and DM365, after setting the
    4BITECC_ADD_CALC_START bit in the NAND Flash control register to 1 and
    before waiting for the NAND Flash status register to be equal to 1, 2 or
    3, we have to wait till the ECC HW goes to correction state.  Without this
    wait, ECC correction calculations will not be proper.
    
    This has been tested on DA830/OMAP-L137, DA850/OMAP-L138, DM355 and DM365
    EVMs.
    
    Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
    Acked-by: Sneha Narnakaje <nsnehaprabha@ti.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

then it is already in upstream in Linus' tree. I do not have anything else from you.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)

  reply	other threads:[~2010-08-25 12:57 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-25 12:18 [RFC] nand/davinci: Fix comment to match the code Wolfram Sang
2010-08-25 12:27 ` Sudhakar Rajashekhara
2010-08-25 12:55   ` Artem Bityutskiy [this message]
2010-08-25 13:30     ` Wolfram Sang
2010-08-26  3:59     ` Sudhakar Rajashekhara
2010-08-26  6:23       ` Wolfram Sang
2010-09-01  8:05       ` Wolfram Sang
2010-09-01 23:14 ` Artem Bityutskiy
2010-09-03 10:35   ` [PATCH] nand/davinci: relax a timeout for ECC-initialization Wolfram Sang
2010-09-03 11:12     ` Sudhakar Rajashekhara
2010-09-03 12:15       ` Wolfram Sang
2010-09-07  8:00     ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1282740906.24044.210.camel@localhost \
    --to=artem.bityutskiy@nokia.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=nsnehaprabha@ti.com \
    --cc=sudhakar.raj@ti.com \
    --cc=w.sang@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.