From: Priit Laes <plaes@plaes.org>
To: netdev@vger.kernel.org, e1000-devel@lists.sourceforge.net
Subject: REGRESSION: e1000e fails to communicate (82566DM)
Date: Mon, 06 Sep 2010 23:51:44 +0300 [thread overview]
Message-ID: <1283806304.6947.13.camel@chi> (raw)
Heya!
After trying out newer 2.6.35-rc3 kernel, the network interface fails to
communicate (via dhcp and manual IP setup).
This seems to be a regression since 2.6.34-rc5:
lspci:
00:19.0 Ethernet controller: Intel Corporation 82566DM Gigabit Network Connection (rev 02)
Subsystem: Intel Corporation Device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at 90300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 90324000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 20e0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41c9
Kernel driver in use: e1000e
ethtool:
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: pumbag
Wake-on: g
Current message level: 0x00000001 (1)
drv
Link detected: yes
next reply other threads:[~2010-09-06 20:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-06 20:51 Priit Laes [this message]
2010-09-09 17:51 ` REGRESSION: e1000e fails to communicate (82566DM) Tantilov, Emil S
2010-09-10 9:57 ` Priit Laes
2010-09-10 17:21 ` Tantilov, Emil S
2010-09-21 7:26 ` REGRESSION: e1000e fails to communicate in 2.6.36-rcx (82566DM) Priit Laes
2010-09-21 16:36 ` Tantilov, Emil S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283806304.6947.13.camel@chi \
--to=plaes@plaes.org \
--cc=e1000-devel@lists.sourceforge.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.