From: Steve Sakoman <steve@sakoman.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module
Date: Wed, 22 Sep 2010 09:39:38 -0700 [thread overview]
Message-ID: <1285173578.21276.10.camel@quadra> (raw)
This patch corrects the pinmux settings to enable proper functioning
of the wifi/bluetooth module.
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
board/ti/panda/panda.h | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
index eb1f021..e3d090e 100644
--- a/board/ti/panda/panda.h
+++ b/board/ti/panda/panda.h
@@ -53,7 +53,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
{GPMC_A20, (IEN | M3)}, /* gpio_44 */
{GPMC_A21, (M3)}, /* gpio_45 */
- {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
+ {GPMC_A22, (M3)}, /* gpio_46 */
{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
{GPMC_A24, (PTD | M3)}, /* gpio_48 */
{GPMC_A25, (PTD | M3)}, /* gpio_49 */
@@ -69,9 +69,9 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
- {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
+ {GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
{C2C_DATA11, (PTD | M3)}, /* gpio_100 */
- {C2C_DATA12, (M1)}, /* dsi1_te0 */
+ {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */
{C2C_DATA13, (PTD | M3)}, /* gpio_102 */
{C2C_DATA14, (M1)}, /* dsi2_te0 */
{C2C_DATA15, (PTD | M3)}, /* gpio_104 */
@@ -189,12 +189,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
- {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
+ {UNIPRO_TX0, (PTD | IEN | M3)}, /* gpio_171 */
{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
- {UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_0 */
- {UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_1 */
+ {UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */
+ {UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
@@ -205,7 +205,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
- {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
+ {FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
{SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
@@ -230,7 +230,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
{DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
{DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
- {DPM_EMU16, (IEN | M5)}, /* dispc2_data3 */
+ {DPM_EMU16, (M3)}, /* gpio_27 */
{DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
{DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
@@ -248,7 +248,7 @@ const struct pad_conf_entry wkup_padconf_array[] = {
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
{PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
{PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
--
1.7.0.4
next reply other threads:[~2010-09-22 16:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-22 16:39 Steve Sakoman [this message]
2010-09-22 16:44 ` [U-Boot] [PATCH] ARMV7: OMAP4: Fix Panda pinmux setting to enable Wifi/BT Module Jan, Sebastien
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285173578.21276.10.camel@quadra \
--to=steve@sakoman.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.