From: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com
Subject: [PATCH] ASoC: Remove unneeded use of spi_bus_type
Date: Wed, 29 Sep 2010 11:48:19 +0100 [thread overview]
Message-ID: <1285757299-2065-1-git-send-email-dp@opensource.wolfsonmicro.com> (raw)
No need to explicitly set the bus type, spi_register_driver does
that for us.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8510.c | 1 -
sound/soc/codecs/wm8711.c | 1 -
sound/soc/codecs/wm8728.c | 1 -
sound/soc/codecs/wm8731.c | 1 -
sound/soc/codecs/wm8750.c | 1 -
sound/soc/codecs/wm8753.c | 1 -
sound/soc/codecs/wm8776.c | 1 -
sound/soc/codecs/wm8900.c | 1 -
sound/soc/codecs/wm8985.c | 1 -
sound/soc/codecs/wm8988.c | 1 -
10 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 02ecf54..8f10709 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -627,7 +627,6 @@ static int __devexit wm8510_spi_remove(struct spi_device *spi)
static struct spi_driver wm8510_spi_driver = {
.driver = {
.name = "wm8510",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8510_spi_probe,
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
index 52a923a..54fbd76 100644
--- a/sound/soc/codecs/wm8711.c
+++ b/sound/soc/codecs/wm8711.c
@@ -453,7 +453,6 @@ static int __devexit wm8711_spi_remove(struct spi_device *spi)
static struct spi_driver wm8711_spi_driver = {
.driver = {
.name = "wm8711-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8711_spi_probe,
diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c
index 32eba85..075f35e 100644
--- a/sound/soc/codecs/wm8728.c
+++ b/sound/soc/codecs/wm8728.c
@@ -307,7 +307,6 @@ static int __devexit wm8728_spi_remove(struct spi_device *spi)
static struct spi_driver wm8728_spi_driver = {
.driver = {
.name = "wm8728-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8728_spi_probe,
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index bdce125..6313858 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -600,7 +600,6 @@ static int __devexit wm8731_spi_remove(struct spi_device *spi)
static struct spi_driver wm8731_spi_driver = {
.driver = {
.name = "wm8731-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8731_spi_probe,
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 4d1ec9d..6c924cd 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -782,7 +782,6 @@ static int __devexit wm8750_spi_remove(struct spi_device *spi)
static struct spi_driver wm8750_spi_driver = {
.driver = {
.name = "wm8750-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8750_spi_probe,
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 64ea066..8f679a1 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1651,7 +1651,6 @@ static int __devexit wm8753_spi_remove(struct spi_device *spi)
static struct spi_driver wm8753_spi_driver = {
.driver = {
.name = "wm8753-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8753_spi_probe,
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index c0b6917..04182c4 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -483,7 +483,6 @@ static int __devexit wm8776_spi_remove(struct spi_device *spi)
static struct spi_driver wm8776_spi_driver = {
.driver = {
.name = "wm8776-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8776_spi_probe,
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 25c8ccd..b4f1172 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -1291,7 +1291,6 @@ static int __devexit wm8900_spi_remove(struct spi_device *spi)
static struct spi_driver wm8900_spi_driver = {
.driver = {
.name = "wm8900-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8900_spi_probe,
diff --git a/sound/soc/codecs/wm8985.c b/sound/soc/codecs/wm8985.c
index bd109c4..04ec1fe 100644
--- a/sound/soc/codecs/wm8985.c
+++ b/sound/soc/codecs/wm8985.c
@@ -1145,7 +1145,6 @@ static int __devexit wm8985_spi_remove(struct spi_device *spi)
static struct spi_driver wm8985_spi_driver = {
.driver = {
.name = "wm8985",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8985_spi_probe,
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index d08b1fe..d7f2597 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -844,7 +844,6 @@ static int __devexit wm8988_spi_remove(struct spi_device *spi)
static struct spi_driver wm8988_spi_driver = {
.driver = {
.name = "wm8988-codec",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8988_spi_probe,
--
1.7.3
next reply other threads:[~2010-09-29 10:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-29 10:48 Dimitris Papastamos [this message]
2010-09-30 19:29 ` [PATCH] ASoC: Remove unneeded use of spi_bus_type Liam Girdwood
2010-09-30 20:34 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285757299-2065-1-git-send-email-dp@opensource.wolfsonmicro.com \
--to=dp@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.