From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] powerpc/8xxx: Add fdt_fixup_phy_connection helper
Date: Thu, 30 Sep 2010 09:18:31 -0500 [thread overview]
Message-ID: <1285856311-7471-2-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1285856311-7471-1-git-send-email-galak@kernel.crashing.org>
Add a common helper that will set the PHY connection type based on enum.
We use this on eTSEC, UCC, and will with Fman in the future.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/cpu/mpc8xxx/fdt.c | 24 ++++++++++++++++++++++++
arch/powerpc/include/asm/fsl_enet.h | 2 ++
board/freescale/mpc8360emds/mpc8360emds.c | 15 ++++++---------
board/freescale/mpc837xemds/mpc837xemds.c | 8 ++++----
board/freescale/mpc8569mds/mpc8569mds.c | 4 ++--
5 files changed, 38 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 88c47d1..54e60bb 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -27,6 +27,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/mp.h>
+#include <asm/fsl_enet.h>
#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
static int ft_del_cpuhandle(void *blob, int cpuhandle)
@@ -215,3 +216,26 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
fdt_del_node_and_alias(blob, "crypto");
}
#endif
+
+int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc)
+{
+ static const char *fsl_phy_enet_if_str[] = {
+ [MII] = "mii",
+ [RMII] = "rmii",
+ [GMII] = "gmii",
+ [RGMII] = "rgmii",
+ [RGMII_ID] = "rgmii-id",
+ [RGMII_RXID] = "rgmii-rxid",
+ [SGMII] = "sgmii",
+ [TBI] = "tbi",
+ [RTBI] = "rtbi",
+ [XAUI] = "xgmii",
+ [FSL_ETH_IF_NONE] = "",
+ };
+
+ if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str))
+ return fdt_setprop_string(blob, offset, "phy-connection-type", "");
+
+ return fdt_setprop_string(blob, offset, "phy-connection-type",
+ fsl_phy_enet_if_str[phyc]);
+}
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
index 8596157..4fb2857 100644
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ b/arch/powerpc/include/asm/fsl_enet.h
@@ -28,4 +28,6 @@ enum fsl_phy_enet_if {
FSL_ETH_IF_NONE,
};
+int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc);
+
#endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 59ada9c..0babd26 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006,2010 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* See file CREDITS for list of people who contributed to this
@@ -22,6 +22,7 @@
#include <spd_sdram.h>
#include <asm/mmu.h>
#include <asm/io.h>
+#include <asm/fsl_enet.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
@@ -396,10 +397,8 @@ void ft_board_setup(void *blob, bd_t *bd)
prop = fdt_getprop(blob, path,
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
- fdt_setprop(blob, path,
- "phy-connection-type",
- "rgmii-rxid",
- sizeof("rgmii-rxid"));
+ fdt_fixup_phy_connection(blob, path,
+ RGMII_RXID);
}
#endif
#if defined(CONFIG_HAS_ETH1)
@@ -410,10 +409,8 @@ void ft_board_setup(void *blob, bd_t *bd)
prop = fdt_getprop(blob, path,
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
- fdt_setprop(blob, path,
- "phy-connection-type",
- "rgmii-rxid",
- sizeof("rgmii-rxid"));
+ fdt_fixup_phy_connection(blob, path,
+ RGMII_RXID);
}
#endif
}
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 32a87ad..51dd692 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007,2010 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* CREDITS: Kim Phillips contribute to LIBFDT code
@@ -15,6 +15,7 @@
#include <i2c.h>
#include <asm/io.h>
#include <asm/fsl_mpc83xx_serdes.h>
+#include <asm/fsl_enet.h>
#include <spd_sdram.h>
#include <tsec.h>
#include <libfdt.h>
@@ -136,7 +137,6 @@ int board_eth_init(bd_t *bd)
static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias,
int phy_addr)
{
- const char *phy_type = "sgmii";
const u32 *ph;
int off;
int err;
@@ -148,8 +148,8 @@ static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias,
return;
}
- err = fdt_setprop(blob, off, "phy-connection-type", phy_type,
- strlen(phy_type) + 1);
+ err = fdt_fixup_phy_connection(blob, off, SGMII);
+
if (err) {
printf("WARNING: could not set phy-connection-type for %s: "
"%s.\n", alias, fdt_strerror(err));
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 795e565..743e712 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -622,8 +622,8 @@ void ft_board_setup(void *blob, bd_t *bd)
break;
}
- err = fdt_setprop_string(blob, nodeoff, "phy-connection-type",
- "rmii");
+ err = fdt_fixup_phy_connection(blob, nodeoff, RMII);
+
if (err < 0) {
printf("WARNING: could not set phy-connection-type "
"%s.\n", fdt_strerror(err));
--
1.7.2.3
next prev parent reply other threads:[~2010-09-30 14:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-30 14:18 [U-Boot] [PATCH 1/2] powerpc/fsl: Introduce common enum for PHY types Kumar Gala
2010-09-30 14:18 ` Kumar Gala [this message]
2010-10-20 5:26 ` [U-Boot] [PATCH 2/2] powerpc/8xxx: Add fdt_fixup_phy_connection helper Kumar Gala
2010-10-13 13:46 ` [U-Boot] [PATCH 1/2] powerpc/fsl: Introduce common enum for PHY types Kumar Gala
2010-10-20 5:26 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285856311-7471-2-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.